update form torvalds #6
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Currently drivers are limited to 19 slots for cyclic transfers. However, if the DMA burst size is the same as the period size, the period size can be changed to the full buffer size and intermediate interrupts activated. Since intermediate interrupts will trigger for each burst and the burst size is the same as the period size, the driver will get interrupts each period as expected. This has the benefit of allowing the functionality of many more slots, but only uses 2 slots. This workaround is only active if more than 19 slots are needed and the burst size matches the period size. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The previous patch that added a couple of callback functions put the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING, which causes the build to fail if that option is disabled: drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add': drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function) This moves the four declarations below the #ifdef section so they are always available. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: eff901d ("IB/mlx5: Implement callbacks for manipulating VFs") Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
gcc finds that the i40iw_make_cm_node() function in the recently added i40iw driver uses an uninitilized variable as an index into an array if CONFIG_IPV6 is disabled and the driver uses IPv6 mode: drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node': drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized] ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr); As far as I can tell, this code path can not be used because the ipv4 variable is always set with CONFIG_IPV6 is disabled, but it's better to be sure and prevent the undefined behavior, as well as shut up that warning in a proper way. This adds an 'else' clause for the case we get the warning about, causing the function to return an error in a controlled way. To avoid adding extra mess with combined io()/#ifdef clauses, I'm also converting the existing #ifdef into a more readable if(IS_ENABLED()) check. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f27b474 ("i40iw: add connection management code") Acked-by: Mustafa Ismail <Mustafa.ismail@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…t/dledford/rdma Pull rdma fixes from Doug Ledford: "I'm back from PTO. These issues cropped up while I was gone and are simple fixes. I'll have more after I've caught up, but I wanted to get these in quick. Two minor fixes for 4.6-rc2: - Fix mlx5 build error when on demand paging is not enabled - Fix possible uninit variable in new i40iw driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: i40iw: avoid potential uninitialized variable use IB/mlx5: fix VFs callback function prototypes
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This ports the DAL timeouts and MST rate calculations for the hw from the DAL codebase. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I noticed my monitor didn't power off when it should, this should fix it. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
…_sysfs_addbr" This reverts commit c862cc9. Patch lacks a real-name Signed-off-by. Signed-off-by: David S. Miller <davem@davemloft.net>
Building BPF samples is failing with the below error:
samples/bpf/map_perf_test_user.c: In function ‘main’:
samples/bpf/map_perf_test_user.c:134:9: error: variable ‘r’ has
initializer but incomplete type
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:21: error: ‘RLIM_INFINITY’
undeclared (first use in this function)
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:21: note: each undeclared
identifier is reported only once for each function it appears in
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:16: error: storage size of ‘r’
isn’t known
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
samples/bpf/map_perf_test_user.c:139:2: warning: implicit declaration of
function ‘setrlimit’ [-Wimplicit-function-declaration]
setrlimit(RLIMIT_MEMLOCK, &r);
^
samples/bpf/map_perf_test_user.c:139:12: error: ‘RLIMIT_MEMLOCK’
undeclared (first use in this function)
setrlimit(RLIMIT_MEMLOCK, &r);
^
samples/bpf/map_perf_test_user.c:134:16: warning: unused variable ‘r’
[-Wunused-variable]
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
^
make[2]: *** [samples/bpf/map_perf_test_user.o] Error 1
Fix this by including the necessary header file.
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at it, remove the generation of .s files and fix some typos in the related comment. Cc: Alexei Starovoitov <ast@fb.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Add the necessary definitions for building bpf samples on ppc. Since ppc doesn't store function return address on the stack, modify how PT_REGS_RET() and PT_REGS_FP() work. Also, introduce PT_REGS_IP() to access the instruction pointer. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: ddf97cc ("net_sched: add network namespace support for tc actions") Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Trinity and other fuzzers can hit this WARN on far too easily, resulting in a tainted kernel that hinders automated fuzzing. Replace it with a rate-limited printk. Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
While initializing the phy, the stmmac driver sets the PHY_IGNORE_INTERRUPT so the PAL won't call the adjust hook that is needed, on some platforms, e.g. STi, to invoke the glue. The patch allows the PAL to poll the stmmac_adjust_link just one time in case of a switch is attached, setting later the PHY_IGNORE_INTERRUPT flag. Moving this kind of logic inside the adjust_link it makes sense to anticipate the check for EEE that will never initialized in this scenario. Reported-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The check in vmci_transport_peer_detach_cb should only allow a detach when the qp handle of the transport matches the one in the detach message. Testing: Before this change, a detach from a peer on a different socket would cause an active stream socket to register a detach. Reviewed-by: George Zhang <georgezhang@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Let's see if anybody even notices. I doubt anybody uses this, and it does expose addresses that should be randomized, so let's just remove the code. It's old and traditional, and it used to be cute, but we should have removed this long ago. If it turns out anybody notices and this breaks something, we'll have to revert this, and maybe we'll end up using other approaches instead (using %pK or similar). But removing unnecessary code is always the preferred option. Noted-by: Emrah Demir <ed@abdsec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JMP_JSET tests incorrectly used BPF_JNE. Fix the same. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Unsigned Jump-if-Greater-Than. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
BPF_ALU32 and BPF_ALU64 tests for adding two 32-bit values that results in 32-bit overflow. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Some of these tests proved useful with the powerpc eBPF JIT port due to sign-extended 16-bit immediate loads. Though some of these aspects get covered in other tests, it is better to have explicit tests so as to quickly tag the precise problem. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
I got the following message: > Your mail to 'Intel-wired-lan' with the subject > > [PATCH net-next] net: intel: remove dead links > > Is being held until the list moderator can review it for approval. > > The reason it is being held: > > Post by non-member to a members-only list Mark the list as moderated. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is for the recent kcm driver, which introduces AF_KCM(41) in b7ac4eb(kcm: Kernel Connection Multiplexor module). Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…inux into drm-fixes Lots of misc bug fixes for radeon and amdgpu and one for ttm. - fix vram info fetching on Fiji and unposted boards - additional vblank fixes from the conversion to drm_vblank_on/off - UVD dGPU suspend and resume fixes - lots of powerplay fixes - fix a fence leak in the pageflip code - ttm fix for platforms where CPU is 32 bit, but physical addresses are >32bits * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. drm/amd/powerplay: notify amdgpu whether dpm is enabled or not. drm/amdgpu: Not support disable dpm in powerplay. drm/amdgpu: add an cgs interface to notify amdgpu the dpm state. ...
This case is supposed to read from a page after after it is freed, but it missed freeing val if we are not able to get a free page. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Kees Cook <keescook@chromium.org>
This case is supposed to read from a memory after it has been freed, but we missed freeing base if the memory 'val' could not be allocated. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Kees Cook <keescook@chromium.org>
This frees the allocated page if there is a kmalloc failure. Signed-off-by: Kees Cook <keescook@chromium.org>
The acpi_pcc_probe() may end up accessing memory outside of the PCCT table space causing the kernel panic(). Increment the pcct_entry pointer after parsing 'HW-reduced Communications Subspace' to fix the problem. This change also enables the parsing of subtable at index 0. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
…git/kdave/linux into for-linus-4.6
If we rename an inode A (be it a file or a directory), create a new
inode B with the old name of inode A and under the same parent directory,
fsync inode B and then power fail, at log tree replay time we end up
removing inode A completely. If inode A is a directory then all its files
are gone too.
Example scenarios where this happens:
This is reproducible with the following steps, taken from a couple of
test cases written for fstests which are going to be submitted upstream
soon:
# Scenario 1
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir -p /mnt/a/x
echo "hello" > /mnt/a/x/foo
echo "world" > /mnt/a/x/bar
sync
mv /mnt/a/x /mnt/a/y
mkdir /mnt/a/x
xfs_io -c fsync /mnt/a/x
<power failure happens>
The next time the fs is mounted, log tree replay happens and
the directory "y" does not exist nor do the files "foo" and
"bar" exist anywhere (neither in "y" nor in "x", nor the root
nor anywhere).
# Scenario 2
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir /mnt/a
echo "hello" > /mnt/a/foo
sync
mv /mnt/a/foo /mnt/a/bar
echo "world" > /mnt/a/foo
xfs_io -c fsync /mnt/a/foo
<power failure happens>
The next time the fs is mounted, log tree replay happens and the
file "bar" does not exists anymore. A file with the name "foo"
exists and it matches the second file we created.
Another related problem that does not involve file/data loss is when a
new inode is created with the name of a deleted snapshot and we fsync it:
mkfs.btrfs -f /dev/sdc
mount /dev/sdc /mnt
mkdir /mnt/testdir
btrfs subvolume snapshot /mnt /mnt/testdir/snap
btrfs subvolume delete /mnt/testdir/snap
rmdir /mnt/testdir
mkdir /mnt/testdir
xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir
<power failure>
The next time the fs is mounted the log replay procedure fails because
it attempts to delete the snapshot entry (which has dir item key type
of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry,
resulting in the following error that causes mount to fail:
[52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
[52174.512570] ------------[ cut here ]------------
[52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]()
[52174.514681] BTRFS: Transaction aborted (error -2)
[52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc
[52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1
[52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758
[52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd
[52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88
[52174.524053] Call Trace:
[52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90
[52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2
[52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs]
[52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50
[52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs]
[52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284
[52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
[52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs]
[52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs]
[52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs]
[52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs]
[52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs]
[52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs]
[52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs]
[52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs]
[52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
[52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131
[52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
[52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs]
[52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
[52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3
[52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131
[52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
[52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8
[52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59
[52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f
[52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b
[52174.561288] ---[ end trace 6b53049efb1a3ea6 ]---
Fix this by forcing a transaction commit when such cases happen.
This means we check in the commit root of the subvolume tree if there
was any other inode with the same reference when the inode we are
fsync'ing is a new inode (created in the current transaction).
Test cases for fstests, covering all the scenarios given above, were
submitted upstream for fstests:
* fstests: generic test for fsync after renaming directory
https://patchwork.kernel.org/patch/8694281/
* fstests: generic test for fsync after renaming file
https://patchwork.kernel.org/patch/8694301/
* fstests: add btrfs test for fsync after snapshot deletion
https://patchwork.kernel.org/patch/8670671/
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
arch_spin_lock_wait_flags() checks if a spinlock is not held before trying a compare and swap instruction. If the lock is unlocked it tries the compare and swap instruction, however if a different cpu grabbed the lock in the meantime the instruction will fail as expected. Subsequently the arch_spin_lock_wait_flags() incorrectly tries to figure out if the cpu that holds the lock is running. However it is using the wrong cpu number for this (-1) and then will also yield the current cpu to the wrong cpu. Fix this by adding a missing continue statement. Fixes: 470ada6 ("s390/spinlock: refactor arch_spin_lock_wait[_flags]") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure that s390 appears to be a big endian machine by defining this config option. Without this s390 appears to be little endian as seen by e.g. the recordmount script: "perl ./scripts/recordmcount.pl "s390" "little" "64"" This has no practical impact within the script since the endian variable is only evaluated for mips. However there are already a couple of common code places which evaluate this config option. None of them is relevant for s390 currently though. To avoid any issues in the future (and fix the recordmcount oddity) add the new config option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After 104daa7 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. We don't attempt to read past that valid size because that causes some devices to crash. However, some devices do have data past that valid size. For example, Chelsio adapters contain two VPD structures, and the driver needs both of them. Add pci_set_vpd_size(). If a driver knows it is safe to read past the end of the VPD data structure at offset 0, it can use pci_set_vpd_size() to allow access to as much data as it needs. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa7 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Chelsio adapters have two VPD structures stored in the VPD: - offset 0x000: an abbreviated VPD, and - offset 0x400: the complete VPD. After 104daa7 ("PCI: Determine actual VPD size on first access"), the PCI core computes the valid VPD size by parsing the VPD starting at offset 0x0. That size only includes the abbreviated VPD structure, so reads of the complete VPD at 0x400 fail. Explicitly set the VPD size with pci_set_vpd_size() so the driver can read both VPD structures. [bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and return int (not ssize_t)] Fixes: 104daa7 ("PCI: Determine actual VPD size on first access") Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The ACPI specification does not specify the state of data after a clear poison operation. Potential future libnvdimm bus implementations for other architectures also might not specify or disagree on the state of data after clear poison. Clarify why we write twice. Reported-by: Jeff Moyer <jmoyer@redhat.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
…nel/git/deller/parisc-linux Pull parisc ftrace fixes from Helge Deller: "This is (most likely) the last pull request for v4.6 for the parisc architecture. It fixes the FTRACE feature for parisc, which is horribly broken since quite some time and doesn't even compile. This patch just fixes the bare minimum (it actually removes more lines than it adds), so that the function tracer works again on 32- and 64bit kernels. I've queued up additional patches on top of this patch which e.g. add the syscall tracer, but those have to wait for the merge window for v4.7." * 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix ftrace function tracer
Pull drm fixes from Dave Airlie:
"This contains fixes for exynos, amdgpu, radeon, i915 and qxl.
It also contains some fixes to the core drm edid parser.
qxl:
- fix for a cursor hotspot issue
radeon:
- some MST fixes that I've been running locally and make my monitor a
bit happier
exynos:
- fix some regressions and build fixes
amdgpu:
- a couple of small fixes
i915:
- two DP MST fixes and a couple of other regression fixes
Nothing too out of the ordinary or surprising at this point"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency
drm/exynos: fix a warning message
drm/exynos: mic: fix an error code
drm/exynos: fimd: fix broken dp_clock control
drm/exynos: build fbdev code conditionally
drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set
drm/exynos: fix error handling in exynos_drm_subdrv_open
drm/amd/amdgpu: fix irq domain remove for tonga ih
drm/i915: fix deadlock on lid open
drm/radeon: use helper for mst connector dpms.
drm/radeon/mst: port some MST setup code from DAL.
drm/amdgpu: add invisible pin size statistic
drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings
drm/i915: Exit cherryview_irq_handler() after one pass
drm/i915: Call intel_dp_mst_resume() before resuming displays
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor
drm/edid: Fix EDID Established Timings I and II
drm/qxl: fix cursor position with non-zero hotspot
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc4. Regarding the fix for the regression about mmcblk device indexes. The approach taken to solve the problem seems to be good enough. There were some discussions around the solution, but it seems like people were happy about it in the end. MMC core: - Restore similar old behaviour when assigning mmcblk device indexes MMC host: - tegra: Disable UHS-I modes for Tegra124 to fix regression" * tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: tegra: Disable UHS-I modes for Tegra124 mmc: block: Use the mmc host device index as the mmcblk device index
Pull MTD fix from Brian Norris: "One MTD fix for v4.6-rc4: In the v4.4 cycle, we relaxed the requirement for assigning mtd->owner, but we didn't remove this error case. It's hit only by drivers that are both: (a) using nand_scan() directly and (b) built as modules We haven't seen explicit complaints about this (most use cases don't fit one or both of the above), but we should definitely not be BUG()'ing here" * tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd: mtd: nand: Drop mtd.owner requirement in nand_scan
…kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Ross Zwisler:
"Two fixes:
- Fix memcpy_from_pmem() to fallback to memcpy() for architectures
where CONFIG_ARCH_HAS_PMEM_API=n.
- Add a comment explaining why we write data twice when clearing
poison in pmem_do_bvec().
This has passed a boot test on an X86_32 config, which was the
architecture where issue #1 above was first noticed"
Dan Williams adds:
"We're giving this multi-maintainer setup a shot, so expect libnvdimm
pull requests from either Ross or I going forward"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pmem: clarify the write+clear_poison+write flow
pmem: fix BUG() error in pmem.h:48 on X86_32
Pull block fixes from Jens Axboe:
"A few fixes for the current series. This contains:
- Two fixes for NVMe:
One fixes a reset race that can be triggered by repeated
insert/removal of the module.
The other fixes an issue on some platforms, where we get probe
timeouts since legacy interrupts isn't working. This used not to
be a problem since we had the worker thread poll for completions,
but since that was killed off, it means those poor souls can't
successfully probe their NVMe device. Use a proper IRQ check and
probe (msi-x -> msi ->legacy), like most other drivers to work
around this. Both from Keith.
- A loop corruption issue with offset in iters, from Ming Lei.
- A fix for not having the partition stat per cpu ref count
initialized before sending out the KOBJ_ADD, which could cause user
space to access the counter prior to initialization. Also from
Ming Lei.
- A fix for using the wrong congestion state, from Kaixu Xia"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: loop: fix filesystem corruption in case of aio/dio
NVMe: Always use MSI/MSI-x interrupts
NVMe: Fix reset/remove race
writeback: fix the wrong congested state variable definition
block: partition: initialize percpuref before sending out KOBJ_ADD
…inux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "An arm64 boot crash fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
…cm/linux/kernel/git/tip/tip Pull locking fixlet from Ingo Molnar: "Fixes a build warning on certain Kconfig combinations" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix print_collision() unused warning
…oul/slave-dma Pull dmaengine fixes from Vinod Koul: "This time we have some odd fixes in hsu, edma, omap and xilinx. Usual fixes and nothing special" * tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: fix master selection dmaengine: edma: special case slot limit workaround dmaengine: edma: Remove dynamic TPTC power management feature dmaengine: vdma: don't crash when bad channel is requested dmaengine: omap-dma: Do not suppress interrupts for memcpy dmaengine: omap-dma: Fix polled channel completion detection and handling dmaengine: hsu: correct use of channel status register dmaengine: hsu: correct residue calculation of active descriptor dmaengine: hsu: set HSU_CH_MTSR to memory width
…git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB fixes for 4.6-rc4. Mostly xhci fixes for reported issues, a UAS bug that has hit a number of people, including stable tree users, and a few other minor things. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: hcd: out of bounds access in for_each_companion USB: uas: Add a new NO_REPORT_LUNS quirk USB: uas: Limit qdepth at the scsi-host level doc: usb: Fix typo in gadget_multi documentation usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers usb: xhci: fix wild pointers in xhci_mem_cleanup usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT xhci: resume USB 3 roothub first usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host cdc-acm: fix crash if flushed with nothing buffered
…/kernel/git/gregkh/driver-core Pull misc fixes from Greg KH: "Here are three small fixes for 4.6-rc4. Two fix up some lz4 issues with big endian systems, and the remaining one resolves a minor debugfs issue that was reported. All have been in linux-next with no reported issues" * tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lib: lz4: cleanup unaligned access efficiency detection lib: lz4: fixed zram with lz4 on big endian machines debugfs: Make automount point inodes permanently empty
…ernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes for 4.6-rc4. Full details are in the shortlog, nothing major here. These have all been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: do not leak free page on kmalloc failure lkdtm: fix memory leak of base lkdtm: fix memory leak of val extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
Commit 9567366 ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in cmd_read_lock(), yet up_read() is used to release the lock in READ_UNLOCK(). Fix it. Fixes: 9567366 ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") Cc: stable@vger.kernel.org Signed-off-by: Ahmed Samy <f.fallen45@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
…/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and sparse didn't catch it)" * tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache metadata: fix cmd_read_lock() acquiring write lock
…/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add CPU_BIG_ENDIAN config option s390/spinlock: avoid yield to non existent cpu s390/dcssblk: fix possible deadlock in remove vs. per-device attributes s390/seccomp: include generic seccomp header file s390/pci: add extra padding to function measurement block s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS
This gets rid of the horrible notion of having that
struct inode *ptmx_inode
be the linchpin of the interface between the pty code and devpts.
By de-emphasizing the ptmx inode, a lot of things actually get cleaner,
and we will have a much saner way forward. In particular, this will
allow us to associate with any particular devpts instance at open-time,
and not be artificially tied to one particular ptmx inode.
The patch itself is actually fairly straightforward, and apart from some
locking and return path cleanups it's pretty mechanical:
- the interfaces that devpts exposes all take "struct pts_fs_info *"
instead of "struct inode *ptmx_inode" now.
NOTE! The "struct pts_fs_info" thing is a completely opaque structure
as far as the pty driver is concerned: it's still declared entirely
internally to devpts. So the pty code can't actually access it in any
way, just pass it as a "cookie" to the devpts code.
- the "look up the pts fs info" is now a single clear operation, that
also does the reference count increment on the pts superblock.
So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get
ref" operation (devpts_get_ref(inode)), along with a "put ref" op
(devpts_put_ref()).
- the pty master "tty->driver_data" field now contains the pts_fs_info,
not the ptmx inode.
- because we don't care about the ptmx inode any more as some kind of
base index, the ref counting can now drop the inode games - it just
gets the ref on the superblock.
- the pts_fs_info now has a back-pointer to the super_block. That's so
that we can easily look up the information we actually need. Although
quite often, the pts fs info was actually all we wanted, and not having
to look it up based on some magical inode makes things more
straightforward.
In particular, now that "devpts_get_ref(inode)" operation should really
be the *only* place we need to look up what devpts instance we're
associated with, and we do it exactly once, at ptmx_open() time.
The other side of this is that one ptmx node could now be associated
with multiple different devpts instances - you could have a single
/dev/ptmx node, and then have multiple mount namespaces with their own
instances of devpts mounted on /dev/pts/. And that's all perfectly sane
in a model where we just look up the pts instance at open time.
This will eventually allow us to get rid of our odd single-vs-multiple
pts instance model, but this patch in itself changes no semantics, only
an internal binding model.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…rnel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for two issues:
- The VPD parsing code we added for v4.6 keeps some devices from
crashing, but also keeps cxgb4 from reading non-standard extra VPD
data that is relies on. Hariprasad added a way for the driver to
specify how much VPD is valid.
- The i.MX6 active-low reset GPIO support we added in v4.5 caused
regressions on some boards, so we're reverting that.
VPD:
Add pci_set_vpd_size() (Hariprasad Shenai)
cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai)
Freescale i.MX6 host bridge driver:
Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)"
* tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
cxgb4: Set VPD size so we can read both VPD structures
PCI: Add pci_set_vpd_size() to set VPD size
Revert "PCI: imx6: Add support for active-low reset GPIO"
Merge the ptmx internal interface cleanup branch. This doesn't change semantics, but it should be a sane basis for eventually getting the multi-instance devpts code into some sane shape where we can get rid of the kernel config option. Which we can hopefully get done next merge window.. * ptmx-cleanup: devpts: clean up interface to pty drivers
…/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Incorrect output buffer size calculation in rsa-pkcs1pad - Uninitialised padding bytes on exported state in ccp driver - Potentially freed pointer used on completion callback in sha1-mb" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Prevent information leakage on export crypto: sha1-mb - use corrcet pointer while completing jobs crypto: rsa-pkcs1pad - fix dst len
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.