Updated config files

drunken-octopus · Jul 1, 2024 · a1bf01d · a1bf01d
1 parent acbc8c1
commit a1bf01d
Show file tree

Hide file tree

Showing 387 changed files with 2,467 additions and 2,207 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION
 

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1335,8 +1335,6 @@
   //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
   //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -2337,6 +2335,7 @@
  *
  * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
  * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
  */
 //#define NONLINEAR_EXTRUSION
 
@@ -2564,27 +2563,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
 
 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-//#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE_NS 2000
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

diff --git a/...ig/examples/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration.h b/...ig/examples/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION
 

diff --git a/...xamples/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration_adv.h b/...xamples/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration_adv.h
@@ -1335,8 +1335,6 @@
   #define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..." // <-- changed
   #define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved" // <-- changed
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -2337,6 +2335,7 @@
  *
  * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
  * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
  */
 //#define NONLINEAR_EXTRUSION
 
@@ -2564,27 +2563,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
 
 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 1 // <-- changed
+#define MINIMUM_STEPPER_PULSE_NS 1000 // <-- changed
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

diff --git a/...s/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration_summary.txt b/...s/AlephObjects/accessory/Gladiola_Mini/AchemonSphinx_SmallLayer/Configuration_summary.txt
@@ -87,7 +87,7 @@
 #define MACHINE_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
 #define MAX_BED_POWER 255
 #define MEASURE_BACKLASH_WHEN_PROBING
-#define MINIMUM_STEPPER_PULSE 1
+#define MINIMUM_STEPPER_PULSE_NS 1000
 #define MIN_STEPS_PER_SEGMENT 6
 #define MOTHERBOARD BOARD_MINIRAMBO
 #define MULTIPLE_PROBING 2

diff --git a/config/examples/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration.h b/config/examples/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION
 

diff --git a/.../examples/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration_adv.h b/.../examples/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration_adv.h
@@ -1335,8 +1335,6 @@
   #define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..." // <-- changed
   #define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved" // <-- changed
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -2337,6 +2335,7 @@
  *
  * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
  * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
  */
 //#define NONLINEAR_EXTRUSION
 
@@ -2564,27 +2563,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
 
 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 1 // <-- changed
+#define MINIMUM_STEPPER_PULSE_NS 1000 // <-- changed
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

diff --git a/...les/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration_summary.txt b/...les/AlephObjects/accessory/Gladiola_Mini/Albatross_Flexystruder/Configuration_summary.txt
@@ -87,7 +87,7 @@
 #define MACHINE_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
 #define MAX_BED_POWER 255
 #define MEASURE_BACKLASH_WHEN_PROBING
-#define MINIMUM_STEPPER_PULSE 1
+#define MINIMUM_STEPPER_PULSE_NS 1000
 #define MIN_STEPS_PER_SEGMENT 6
 #define MOTHERBOARD BOARD_MINIRAMBO
 #define MULTIPLE_PROBING 2

diff --git a/...g/examples/AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration.h b/...g/examples/AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION
 

diff --git a/...amples/AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration_adv.h b/...amples/AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration_adv.h
@@ -1335,8 +1335,6 @@
   #define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..." // <-- changed
   #define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved" // <-- changed
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -2337,6 +2335,7 @@
  *
  * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
  * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
  */
 //#define NONLINEAR_EXTRUSION
 
@@ -2564,27 +2563,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
 
 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 1 // <-- changed
+#define MINIMUM_STEPPER_PULSE_NS 1000 // <-- changed
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

diff --git a/.../AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration_summary.txt b/.../AlephObjects/accessory/Gladiola_Mini/BandedTiger_HardenedSteel/Configuration_summary.txt
@@ -87,7 +87,7 @@
 #define MACHINE_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
 #define MAX_BED_POWER 255
 #define MEASURE_BACKLASH_WHEN_PROBING
-#define MINIMUM_STEPPER_PULSE 1
+#define MINIMUM_STEPPER_PULSE_NS 1000
 #define MIN_STEPS_PER_SEGMENT 6
 #define MOTHERBOARD BOARD_MINIRAMBO
 #define MULTIPLE_PROBING 2

diff --git a/...es/AlephObjects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration.h b/...es/AlephObjects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION
 

diff --git a/...lephObjects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration_adv.h b/...lephObjects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration_adv.h
@@ -1335,8 +1335,6 @@
   #define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..." // <-- changed
   #define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved" // <-- changed
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -2337,6 +2335,7 @@
  *
  * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
  * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
  */
 //#define NONLINEAR_EXTRUSION
 
@@ -2564,27 +2563,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
 
 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 1 // <-- changed
+#define MINIMUM_STEPPER_PULSE_NS 1000 // <-- changed
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals_adv.h) apply:
  *  5000000 : Maximum for TMC2xxx stepper drivers
  *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
  *
  * Override the default value based on the driver type set in Configuration.h.
  */

diff --git a/...jects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration_summary.txt b/...jects/accessory/Gladiola_Mini/CecropiaSilk_SingleExtruderAeroV2/Configuration_summary.txt
@@ -87,7 +87,7 @@
 #define MACHINE_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
 #define MAX_BED_POWER 255
 #define MEASURE_BACKLASH_WHEN_PROBING
-#define MINIMUM_STEPPER_PULSE 1
+#define MINIMUM_STEPPER_PULSE_NS 1000
 #define MIN_STEPS_PER_SEGMENT 6
 #define MOTHERBOARD BOARD_MINIRAMBO
 #define MULTIPLE_PROBING 2

diff --git a/...mples/AlephObjects/accessory/Gladiola_Mini/DingyCutworm_HardenedSteelPlus/Configuration.h b/...mples/AlephObjects/accessory/Gladiola_Mini/DingyCutworm_HardenedSteelPlus/Configuration.h
@@ -3445,7 +3445,9 @@
   #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
 
-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif
 
   #define TOUCH_SCREEN_CALIBRATION