Update configs.

drunken-octopus · May 15, 2022 · 9bebe32 · 9bebe32
1 parent 8c8f7e6
commit 9bebe32
Show file tree

Hide file tree

Showing 7 changed files with 84 additions and 154 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1257,7 +1257,7 @@
 
 // @section lcd
 
-#if ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+#if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
@@ -1280,7 +1280,7 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
-#if HAS_LCD_MENU
+#if HAS_MARLINUI_MENU
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
@@ -1352,7 +1352,7 @@
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 
-#endif // HAS_LCD_MENU
+#endif // HAS_MARLINUI_MENU
 
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
@@ -1526,33 +1526,23 @@
   // LCD's font must contain the characters. Check your selected LCD language.
   //#define UTF_FILENAME_SUPPORT
 
-  // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 
-  // Enable this option to scroll long filenames in the SD card menu
-  //#define SCROLL_LONG_FILENAMES
+  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
 
-  // Leave the heaters on after Stop Print (not recommended!)
-  //#define SD_ABORT_NO_COOLDOWN
+  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
   /**
-   * This option allows you to abort SD printing when any endstop is triggered.
-   * This feature must be enabled with "M540 S1" or from the LCD menu.
-   * To have any effect, endstops must be enabled during SD printing.
+   * Abort SD printing when any endstop is triggered.
+   * This feature is enabled with 'M540 S1' or from the LCD menu.
+   * Endstops must be activated for this option to work.
    */
   //#define SD_ABORT_ON_ENDSTOP_HIT
 
-  /**
-   * This option makes it easier to print the same SD Card file again.
-   * On print completion the LCD Menu will open with the file selected.
-   * You can just click to start the print, or navigate elsewhere.
-   */
-  //#define SD_REPRINT_LAST_SELECTED_FILE
+  //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
 
-  /**
-   * Auto-report SdCard status with M27 S<seconds>
-   */
-  //#define AUTO_REPORT_SD_STATUS
+  //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or

diff --git a/.../examples/AlephObjects/standard/Gladiola_Mini/Gladiola_SingleExtruder/Configuration_adv.h b/.../examples/AlephObjects/standard/Gladiola_Mini/Gladiola_SingleExtruder/Configuration_adv.h
@@ -1257,7 +1257,7 @@
 
 // @section lcd
 
-#if ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+#if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
@@ -1280,7 +1280,7 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
-#if HAS_LCD_MENU
+#if HAS_MARLINUI_MENU
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
@@ -1352,7 +1352,7 @@
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 
-#endif // HAS_LCD_MENU
+#endif // HAS_MARLINUI_MENU
 
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
@@ -1526,33 +1526,23 @@
   // LCD's font must contain the characters. Check your selected LCD language.
   //#define UTF_FILENAME_SUPPORT
 
-  // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 
-  // Enable this option to scroll long filenames in the SD card menu
-  //#define SCROLL_LONG_FILENAMES
+  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
 
-  // Leave the heaters on after Stop Print (not recommended!)
-  //#define SD_ABORT_NO_COOLDOWN
+  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
   /**
-   * This option allows you to abort SD printing when any endstop is triggered.
-   * This feature must be enabled with "M540 S1" or from the LCD menu.
-   * To have any effect, endstops must be enabled during SD printing.
+   * Abort SD printing when any endstop is triggered.
+   * This feature is enabled with 'M540 S1' or from the LCD menu.
+   * Endstops must be activated for this option to work.
    */
   //#define SD_ABORT_ON_ENDSTOP_HIT
 
-  /**
-   * This option makes it easier to print the same SD Card file again.
-   * On print completion the LCD Menu will open with the file selected.
-   * You can just click to start the print, or navigate elsewhere.
-   */
-  //#define SD_REPRINT_LAST_SELECTED_FILE
+  //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
 
-  /**
-   * Auto-report SdCard status with M27 S<seconds>
-   */
-  //#define AUTO_REPORT_SD_STATUS
+  //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or

diff --git a/...lephObjects/standard/Hibiscus_Mini2/CecropiaSilk_SingleExtruderAeroV2/Configuration_adv.h b/...lephObjects/standard/Hibiscus_Mini2/CecropiaSilk_SingleExtruderAeroV2/Configuration_adv.h
@@ -1257,7 +1257,7 @@
 
 // @section lcd
 
-#if ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+#if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE {3000, 3000, 2400, 60.0} // <-- changed:  (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
@@ -1280,7 +1280,7 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
-#if HAS_LCD_MENU
+#if HAS_MARLINUI_MENU
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
@@ -1352,7 +1352,7 @@
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 
-#endif // HAS_LCD_MENU
+#endif // HAS_MARLINUI_MENU
 
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
@@ -1526,33 +1526,23 @@
   // LCD's font must contain the characters. Check your selected LCD language.
   //#define UTF_FILENAME_SUPPORT
 
-  // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 
-  // Enable this option to scroll long filenames in the SD card menu
-  #define SCROLL_LONG_FILENAMES // <-- changed
+  #define SCROLL_LONG_FILENAMES // <-- changed:  Scroll long filenames in the SD card menu
 
-  // Leave the heaters on after Stop Print (not recommended!)
-  //#define SD_ABORT_NO_COOLDOWN
+  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
   /**
-   * This option allows you to abort SD printing when any endstop is triggered.
-   * This feature must be enabled with "M540 S1" or from the LCD menu.
-   * To have any effect, endstops must be enabled during SD printing.
+   * Abort SD printing when any endstop is triggered.
+   * This feature is enabled with 'M540 S1' or from the LCD menu.
+   * Endstops must be activated for this option to work.
    */
   //#define SD_ABORT_ON_ENDSTOP_HIT
 
-  /**
-   * This option makes it easier to print the same SD Card file again.
-   * On print completion the LCD Menu will open with the file selected.
-   * You can just click to start the print, or navigate elsewhere.
-   */
-  //#define SD_REPRINT_LAST_SELECTED_FILE
+  //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
 
-  /**
-   * Auto-report SdCard status with M27 S<seconds>
-   */
-  //#define AUTO_REPORT_SD_STATUS
+  //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or

diff --git a/...ig/examples/AlephObjects/standard/Juniper_TAZ5/Tilapia_SingleExtruder/Configuration_adv.h b/...ig/examples/AlephObjects/standard/Juniper_TAZ5/Tilapia_SingleExtruder/Configuration_adv.h
@@ -1257,7 +1257,7 @@
 
 // @section lcd
 
-#if ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+#if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE {3000, 3000, 240, 60.0} // <-- changed:  (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
@@ -1280,7 +1280,7 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
-#if HAS_LCD_MENU
+#if HAS_MARLINUI_MENU
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
@@ -1352,7 +1352,7 @@
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 
-#endif // HAS_LCD_MENU
+#endif // HAS_MARLINUI_MENU
 
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
@@ -1526,33 +1526,23 @@
   // LCD's font must contain the characters. Check your selected LCD language.
   //#define UTF_FILENAME_SUPPORT
 
-  // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 
-  // Enable this option to scroll long filenames in the SD card menu
-  #define SCROLL_LONG_FILENAMES // <-- changed
+  #define SCROLL_LONG_FILENAMES // <-- changed:  Scroll long filenames in the SD card menu
 
-  // Leave the heaters on after Stop Print (not recommended!)
-  //#define SD_ABORT_NO_COOLDOWN
+  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
   /**
-   * This option allows you to abort SD printing when any endstop is triggered.
-   * This feature must be enabled with "M540 S1" or from the LCD menu.
-   * To have any effect, endstops must be enabled during SD printing.
+   * Abort SD printing when any endstop is triggered.
+   * This feature is enabled with 'M540 S1' or from the LCD menu.
+   * Endstops must be activated for this option to work.
    */
   #define SD_ABORT_ON_ENDSTOP_HIT // <-- changed
 
-  /**
-   * This option makes it easier to print the same SD Card file again.
-   * On print completion the LCD Menu will open with the file selected.
-   * You can just click to start the print, or navigate elsewhere.
-   */
-  //#define SD_REPRINT_LAST_SELECTED_FILE
+  //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
 
-  /**
-   * Auto-report SdCard status with M27 S<seconds>
-   */
-  //#define AUTO_REPORT_SD_STATUS
+  //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or

diff --git a/...g/examples/AlephObjects/standard/Oliveoil_TAZ6/Tilapia_SingleExtruder/Configuration_adv.h b/...g/examples/AlephObjects/standard/Oliveoil_TAZ6/Tilapia_SingleExtruder/Configuration_adv.h
@@ -1257,7 +1257,7 @@
 
 // @section lcd
 
-#if ANY(HAS_LCD_MENU, EXTENSIBLE_UI, HAS_DWIN_E3V2)
+#if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE {3000, 3000, 240, 60.0} // <-- changed:  (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
   #if IS_ULTIPANEL
@@ -1280,7 +1280,7 @@
   #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif
 
-#if HAS_LCD_MENU
+#if HAS_MARLINUI_MENU
 
   // Add Probe Z Offset calibration to the Z Probe Offsets menu
   #if HAS_BED_PROBE
@@ -1352,7 +1352,7 @@
   // Insert a menu for preheating at the top level to allow for quick access
   //#define PREHEAT_SHORTCUT_MENU_ITEM
 
-#endif // HAS_LCD_MENU
+#endif // HAS_MARLINUI_MENU
 
 #if ANY(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED, DWIN_CREALITY_LCD_JYERSUI)
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
@@ -1526,33 +1526,23 @@
   // LCD's font must contain the characters. Check your selected LCD language.
   //#define UTF_FILENAME_SUPPORT
 
-  // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 
-  // Enable this option to scroll long filenames in the SD card menu
-  #define SCROLL_LONG_FILENAMES // <-- changed
+  #define SCROLL_LONG_FILENAMES // <-- changed:  Scroll long filenames in the SD card menu
 
-  // Leave the heaters on after Stop Print (not recommended!)
-  //#define SD_ABORT_NO_COOLDOWN
+  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
   /**
-   * This option allows you to abort SD printing when any endstop is triggered.
-   * This feature must be enabled with "M540 S1" or from the LCD menu.
-   * To have any effect, endstops must be enabled during SD printing.
+   * Abort SD printing when any endstop is triggered.
+   * This feature is enabled with 'M540 S1' or from the LCD menu.
+   * Endstops must be activated for this option to work.
    */
   #define SD_ABORT_ON_ENDSTOP_HIT // <-- changed
 
-  /**
-   * This option makes it easier to print the same SD Card file again.
-   * On print completion the LCD Menu will open with the file selected.
-   * You can just click to start the print, or navigate elsewhere.
-   */
-  //#define SD_REPRINT_LAST_SELECTED_FILE
+  //#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
 
-  /**
-   * Auto-report SdCard status with M27 S<seconds>
-   */
-  //#define AUTO_REPORT_SD_STATUS
+  //#define AUTO_REPORT_SD_STATUS         // Auto-report media status with 'M27 S<seconds>'
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or