Rm quick install docs/links

_topic_map.yml

@@ -282,8 +282,6 @@ Topics:
     File: host_preparation
   - Name: Installing on Containerized Hosts
     File: rpm_vs_containerized
-  - Name: Quick Installation
-    File: quick_install
   - Name: Advanced Installation
     File: advanced_install
   - Name: Disconnected Installation

admin_guide/backup_restore.adoc

@@ -51,9 +51,6 @@ nodes they get rescheduled to.
 reinstallation, save all the files used in the initial installation. This may
 include:
 +
-- *_~/.config/openshift/installer.cfg.yml_* (from the
-xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[Quick Installation]
-method)
 - Ansible playbooks and inventory files (from the
 xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[Advanced
 Installation] method)

admin_guide/manage_nodes.adoc

@@ -115,12 +115,6 @@ certificates, and other important steps. See the
 xref:../install_config/adding_hosts_to_existing_cluster.adoc#adding-nodes-advanced[advanced
 installation] method for instructions on running the playbook directly.
 
-ifdef::openshift-enterprise[]
-Alternatively, if you used the quick installation method, you can
-xref:../install_config/adding_hosts_to_existing_cluster.adoc#adding-nodes-or-reinstalling-quick[re-run
-the installer to add nodes], which performs the same steps.
-endif::[]
-
 [[deleting-nodes]]
 == Deleting Nodes
 

admin_guide/managing_networking.adoc

@@ -285,8 +285,8 @@ The egress firewall always allows pods access to the external interface of the
 node the pod is on for DNS resolution. If your DNS resolution is not handled by
 something on the local node, then you will need to add egress firewall rules
 allowing access to the DNS server's IP addresses if you are using domain names
-in your pods. The xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[default installer]
-sets up a local dnsmasq, so if you are using that setup you will not need to add extra rules.
+in your pods. The default installer sets up a local dnsmasq, so if you are using
+that setup you will not need to add extra rules.
 ====
 
 

admin_solutions/master_node_config.adoc

@@ -31,8 +31,6 @@ xref:../architecture/infrastructure_components/kubernetes_infrastructure.adoc#no
 
 [[master-node-config-prereq]]
 == Prerequisites
-For testing environments deployed via the
-xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[quick install], one master should be sufficient. The quick installation method should not be used for production environments.
 
 Production environments should be installed using the
 xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced install]. In production environments, it is a good idea to use
@@ -51,17 +49,16 @@ The only way to successfully run only two masters is if you install etcd on host
 [[master-node-config-masters-nodes]]
 == Configuring Masters and Nodes
 
-The method you use to configure your master and node configuration files must match the method that was used to install your {product-title} cluster. If you followed the:
-
-- xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[Advanced installation]
+The method you use to configure your master and node configuration files must match the method that was used to install your {product-title} cluster. If you followed the xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[Advanced installation]
 method using Ansible, then make your configuration changes
 xref:../admin_solutions/master_node_config.adoc#master-node-config-ansible[in the Ansible playbook].
-- xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[Quick installation]
 ifdef::openshift-origin[]
-or link:https://docs.openshift.org/latest/getting_started/administrators.html[Manual installation]
-endif::openshift-origin[]
-method, then make your changes
-xref:../admin_solutions/master_node_config.adoc#master-node-config-manual[manually in the configuration files] themselves.
+If you followed the
+xref:../getting_started/administrators.adoc#getting-started-administrators[Manual
+installation] method, then make your changes
+xref:../admin_solutions/master_node_config.adoc#master-node-config-manual[manually
+in the configuration files] themselves.
+endif::[]
 
 [[master-node-config-ansible]]
 === Making Configuration Changes Using Ansible
@@ -244,9 +241,8 @@ For more information on the `htpasswd` command, see xref:../install_config/confi
 [[master-node-config-manual]]
 === Making Manual Configuration Changes
 
-After installing {product-title} using the
-xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[quick install],
-you can make modifications to the master and node configuration files to customize your cluster.
+You can make manual modifications to the master and node configuration files to
+customize your cluster.
 
 *Use Case: Configure the cluster to use HTPasswd authentication*
 

install_config/adding_hosts_to_existing_cluster.adoc

@@ -13,92 +13,8 @@ toc::[]
 
 == Overview
 
-Depending on how your {product-title} cluster was installed, you can add new
-hosts (either nodes or masters) to your installation by using the install tool
-for quick installations, or by using the *_scaleup.yml_* playbook for advanced
-installations.
-
-[[adding-nodes-or-reinstalling-quick]]
-== Adding Hosts Using the Quick Installer Tool
-
-If you used the quick install tool to install your {product-title} cluster, you
-can use the quick install tool to add a new node host to your existing cluster.
-
-[NOTE]
-====
-Currently, you can not use the quick installer tool to add new master hosts. You
-must use the
-xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced
-installation] method to do so.
-====
-
-If you used the installer in either
-xref:../install_config/install/quick_install.adoc#running-an-interactive-installation[interactive] or
-xref:../install_config/install/quick_install.adoc#running-an-unattended-installation[unattended] mode, you can re-run the
-installation as long as you have an
-xref:../install_config/install/quick_install.adoc#defining-an-installation-configuration-file[installation configuration
-file] at *_~/.config/openshift/installer.cfg.yml_* (or specify a different
-location with the `-c` option).
-
-////
-If you installed using the
-xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced
-installation] method and therefore do not have an installation configuration
-file, you can either try
-xref:../install_config/install/quick_install.adoc#defining-an-installation-configuration-file[creating your own] based on
-your cluster's current configuration, or see the advanced installation method on
-how to
-xref:adding-nodes-advanced[run the playbook for adding new nodes directly].
-////
-
-[IMPORTANT]
-====
-The recommended maximum number of nodes is 300.
-====
-
-To add nodes to your installation:
-
-. Ensure you have the latest installer and playbooks by updating the
-*openshift-ansible* packages:
-+
-----
-# yum update openshift-ansible
-----
-
-. Run the installer with the `scaleup` subcommand in interactive or
-unattended mode:
-+
-----
-# atomic-openshift-installer [-u] [-c </path/to/file>] scaleup
-----
-
-. The installer detects your current environment and allows you to add additional nodes:
-+
-----
-*** Installation Summary ***
-
-Hosts:
-- 100.100.1.1
-  - OpenShift master
-  - OpenShift node
-  - Etcd (Embedded)
-  - Storage
-
-Total OpenShift masters: 1
-Total OpenShift nodes: 1
-
-
----
-
-We have detected this previously installed OpenShift environment.
-
-This tool will guide you through the process of adding additional
-nodes to your cluster.
-
-Are you ready to continue? [y/N]:
-----
-+
-Choose (y) and follow the on-screen instructions to complete your desired task.
+You can add new hosts (either nodes or masters) to your installation using the
+*_scaleup.yml_* playbook for advanced installations.
 
 [[adding-nodes-advanced]]
 == Adding Hosts Using the Advanced Install
@@ -108,27 +24,13 @@ cluster by running the *_scaleup.yml_* playbook. This playbook queries the
 master, generates and distributes new certificates for the new hosts, then runs
 the configuration playbooks on the new hosts only. Before running the
 *_scaleup.yml_* playbook, complete all prerequisite
-xref:../install_config/install/host_preparation.adoc#install-config-install-host-preparation[host
-preparation] steps.
-
-
-ifdef::openshift-enterprise[]
-This process is similar to re-running the installer in the
-xref:adding-nodes-or-reinstalling-quick[quick installation method to add nodes],
-however you have more configuration options available when using the advanced
-method and when running the playbooks directly.
-endif::[]
+xref:../install_config/install/host_preparation.adoc#install-config-install-host-preparation[host preparation] steps.
 
 You must have an existing inventory file (for example, *_/etc/ansible/hosts_*)
 that is representative of your current cluster configuration in order to run the
 *_scaleup.yml_* playbook.
 ifdef::openshift-enterprise[]
-If you previously used the `atomic-openshift-installer` command to run your
-installation, you can check *_~/.config/openshift/hosts_* (previously located at
-*_~/.config/openshift/.ansible/hosts_*) for the last inventory file that the
-installer generated, and use or modify that as needed as your inventory file.
-You must then specify the file location with `-i` when calling
-`ansible-playbook` later.
+
 endif::[]
 
 [IMPORTANT]

install_config/configuring_authentication.adoc

@@ -26,13 +26,8 @@ xref:identity-providers[identity provider].
 This can be done during an
 xref:../install_config/install/advanced_install.adoc#configuring-cluster-variables[advanced installation] or configured after installation.
 
-If you installed {product-title} using
-the
-ifdef::openshift-enterprise[]
-xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[Quick Installation] or
-endif::[]
-xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[Advanced Installation]
-method, the
+If you installed {product-title} using the
+xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[Advanced Installation] method, the
 ifdef::openshift-enterprise[]
 xref:DenyAllPasswordIdentityProvider[Deny All] identity provider is
 used by default, which denies access for all user names and

install_config/configuring_sdn.adoc

@@ -72,8 +72,6 @@ xref:../install_config/install/advanced_install.adoc#configuring-cluster-variabl
 which is configurable in the Ansible inventory file.
 
 .Example SDN Configuration with Ansible
-====
-
 ----
 # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet')
 # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant'
@@ -109,15 +107,6 @@ which is configurable in the Ansible inventory file.
 # or userspace for the userspace proxy.
 #openshift_node_proxy_mode=iptables
 ----
-====
-
-ifdef::openshift-enterprise[]
-For initial xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[quick installations],
-the *ovs-subnet* plug-in is installed and configured by default as well, and can
-be
-xref:../install_config/master_node_configuration.adoc#master-configuration-files[reconfigured post-installation]
-using the `*networkConfig*` stanza of the *_master-config.yaml_* file.
-endif::[]
 
 [[configuring-the-pod-network-on-masters]]
 == Configuring the Pod Network on Masters
@@ -407,5 +396,3 @@ ONBOOT=yes
 DEFTROUTE=no
 PEERDNS=no
 ----
-
-

install_config/imagestreams_templates.adoc

@@ -17,10 +17,8 @@ ifdef::openshift-enterprise[]
 Your {product-title} installation includes useful sets of Red Hat-provided
 xref:../architecture/core_concepts/builds_and_image_streams.adoc#image-streams[image streams]
 and xref:../dev_guide/templates.adoc#dev-guide-templates[templates] to
-make it easy for developers to create new applications. By default, the
-xref:../install_config/install/quick_install.adoc#install-config-install-quick-install[quick] and
-xref:../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced installation]
-methods automatically create these sets in the *openshift* project, which is a
+make it easy for developers to create new applications. By default, advanced installation
+method automatically creates these sets in the *openshift* project, which is a
 default global project to which all users have view access.
 endif::[]
 

install_config/install/advanced_install.adoc

@@ -43,11 +43,6 @@ xref:running-the-advanced-installation-system-container[containerized version of
 Technology Preview feature.
 ====
 
-ifdef::openshift-enterprise[]
-Alternatively, you can use the xref:../../install_config/install/quick_install.adoc#install-config-install-quick-install[quick installation]
-method if you prefer an interactive installation experience.
-endif::[]
-
 [NOTE]
 ====
 To install {product-title} as a stand-alone registry, see

install_config/install/disconnected_install.adoc

@@ -496,8 +496,7 @@ builder images:
 [[disconnected-running-the-openshift-installer]]
 === Running the {product-title} Installer
 
-You can now choose to follow the
-xref:../../install_config/install/quick_install.adoc#install-config-install-quick-install[quick] or
+You can now follow the
 xref:../../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced]
 {product-title} installation instructions in the documentation.
 

install_config/install/host_preparation.adoc

@@ -118,14 +118,11 @@ xref:../../install_config/install/advanced_install.adoc#running-the-advanced-ins
 
 .. Skip to xref:installing-docker[Installing Docker].
 
-. Install the following package, which provides RPM-based {product-title}
-installer utilities and pulls in other tools required by the
-xref:../../install_config/install/quick_install.adoc#install-config-install-quick-install[quick]
-and
-xref:../../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced installation] methods, such as Ansible and related configuration files:
+. Install the following package, which provides the Ansible playbooks and related
+configuration files needed for installation:
 +
 ----
-# yum install atomic-openshift-utils
+# yum install openshift-ansible
 ----
 endif::[]
 
@@ -632,16 +629,10 @@ Logging Drivers].
 
 == Ensuring Host Access
 
-ifdef::openshift-origin[]
-The xref:advanced_install.adoc#install-config-install-advanced-install[advanced installation] method requires
-endif::[]
-ifdef::openshift-enterprise[]
-The xref:quick_install.adoc#install-config-install-quick-install[quick] and xref:advanced_install.adoc#install-config-install-advanced-install[advanced
-installation] methods require
-endif::[]
-a user that has access to all hosts. If you want to run the installer as a
-non-root user, passwordless *sudo* rights must be configured on each destination
-host.
+The xref:advanced_install.adoc#install-config-install-advanced-install[advanced
+installation] method requires a user that has access to all hosts. If you want
+to run the installer as a non-root user, passwordless *sudo* rights must be
+configured on each destination host.
 
 For example, you can generate an SSH key on the host where you will invoke the
 installation process:
@@ -674,7 +665,6 @@ Containerized Hosts]
 to prepare your hosts.
 
 When you are ready to proceed, you can install {product-title} using the
-xref:quick_install.adoc#install-config-install-quick-install[quick installation] or
 xref:advanced_install.adoc#install-config-install-advanced-install[advanced installation] method.
 endif::[]
 

install_config/install/index.adoc

@@ -7,13 +7,6 @@
 :experimental:
 :prewrap!:
 
-ifdef::openshift-enterprise[]
-The xref:../../install_config/install/quick_install.adoc#install-config-install-quick-install[quick installation]
-method allows you to use an interactive CLI utility to install {product-title}
-across a set of hosts. This installer is a self-contained wrapper intended for
-usage on a Red Hat Enterprise Linux 7 host.
-endif::[]
-
 ifdef::openshift-origin[]
 You can quickly get {product-title} running by choosing an installation method
 in xref:../../getting_started/administrators.adoc#getting-started-administrators[Getting Started for
@@ -23,14 +16,10 @@ endif::[]
 ifdef::openshift-origin,openshift-enterprise,openshift-dedicated[]
 For production environments, a reference configuration implemented using Ansible
 playbooks is available as the
-xref:../../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced installation]
-method.
+xref:../../install_config/install/advanced_install.adoc#install-config-install-advanced-install[advanced installation] method.
 
-[NOTE]
-====
-Before beginning either installation method, start with the
+Before beginning with the installation, start with the
 xref:../../install_config/install/prerequisites.adoc#install-config-install-prerequisites[Prerequisites] topic.
-====
 endif::[]
 
 ifdef::atomic-registry[]