This Readme is still under work, but will cover the following things:
- used hardware
- pinning of the hardware
- documentation of the software modules
- MPU6050 for swing and clash detection
- DFPlayer Mini for sound output
- SPI SD Card Adapter as alternative to DFPlayer Mini
- Arduino Nano
- 3W Single color LED (2.3V/700mAh)
- DCDC XL6009E1 Boost Converter
- ThorFire 3.7V BRC 18650 3000mAh LI-ion
- BC446B NPN Transistor
- BUK453 PowerMOS
- 1 kOhm Resistor
- 100 Ohm Resistor
- 2k7 Ohm Resistor
The hardware will be placed onto a designed PCB after prototyping.
| ARDUINO PIN | PIN | HARDWARE |
|---|---|---|
| D2 | nC | nC |
| D3 | pB1 | PushButton |
| D4 | CS | SD-Card Adapter |
| D5 | G | BUK453 |
| D6 | nC | nC |
| D7 | nC | nC |
| D8 | nC | nC |
| D9 | R1 | In to 2k7 resistor |
| D10 | nC | nC |
| D11 | MOSI | SD-Card Adapter |
| D12 | MISO | SD-Card Adapter |
| D13 | SCK | SD-Card Adapter |
| A0 | nC | nC |
| A1 | nC | nC |
| A2 | nC | nC |
| A3 | nC | nC |
| A4 | SDA | MPU6050 |
| A5 | SCL | MPU6050 |
| A6 | nC | nC |
| A7 | nC | nC |
| RST | nC | nC |
| +5V | VCC | MPU6050 |
| VCC | SD-Card Adapter | |
| GND | GND | MPU6050 |
| GND | SD-Card Adapter | |
| pB2 | PushButton |
This entire software was implemented thanks to the previous work of JakeS0ft and his contributers.
under work
under work