Fork of abo-abo/lispy which tries to simplify it.
List of current changes:
- My bug fixes
- Removed outline handling, which is quite irrelevant to editing Lisp code and better be handled by another package as overriding
outline-regexpand friends is a bit intrusive; also free from loading and installingzoutline.el, which in turn loadsorg.eland becoming a significant performance hog at loading time and/or Emacs startup - Removed supported for non-Lisp languages and focus only on editing Lisp dialects with symbolic expressions as the primary source code structure
Note that the documentations may not be correct as I have not found and edit all deviations yet.
short and sweet LISP editing
Table of Contents
- Introduction
- Getting Started
- Operating on lists
- Operating on regions
- IDE-like features
- Demos
- [Demo 1: Practice generating code](#demo-1-practice-generating-codehttpabo-abogithubiolispydemo-1)
- [Demo 2: The substitution model for procedure application](#demo-2-the-substitution-model-for-procedure-applicationhttpabo-abogithubiolispydemo-2)
- [Demo 3: Down the rabbit hole](#demo-3-down-the-rabbit-holehttpabo-abogithubiolispydemo-3)
- [Demo 4: Project Euler p100 and Clojure](#demo-4-project-euler-p100-and-clojurehttpabo-abogithubiolispydemo-4)
- [Demo 5: ->>ification](#demo-5--ificationhttpabo-abogithubiolispydemo-5)
- [Demo 6: cond->if->cond](#demo-6-cond-if-condhttpabo-abogithubiolispydemo-6)
- Screencasts
This package reimagines Paredit - a popular method to navigate and edit LISP code in Emacs.
The killer-feature are the short bindings:
| command | binding | binding | command |
|---|---|---|---|
paredit-forward |
C-M-f | j | lispy-down |
paredit-backward |
C-M-b | k | lispy-up |
paredit-backward-up |
C-M-u | h | lispy-left |
paredit-forward-up |
C-M-n | l | lispy-right |
paredit-raise-sexp |
M-r | r | lispy-raise |
paredit-convolute-sexp |
M-? | C | lispy-convolute |
paredit-forward-slurp-sexp |
C-) | > | lispy-slurp |
paredit-forward-barf-sexp |
C-} | < | lispy-barf |
paredit-backward-slurp-sexp |
C-( | > | lispy-slurp |
paredit-backward-barf-sexp |
C-{ | < | lispy-barf |
Most of more than 100 interactive commands that lispy provides are
bound to a-z and A-Z in
lispy-mode. You can see the full command reference with many
examples here.
The price for these short bindings is that they are only active when:
- the point is before an open paren:
(,[or{ - the point is after a close paren:
),]or} - the region is active
The advantage of short bindings is that you are more likely to use them. As you use them more, you learn how to combine them, increasing your editing efficiency.
To further facilitate building complex commands from smaller commands,
lispy-mode binds digit-argument to 0-9. For
example, you can mark the third element of the list with
3m. You can then mark third through fifth element (three
total) with 2> or >>. You can then move the
selection to the last three elements of the list with 99j.
If you are currently using Paredit, note that lispy-mode and
paredit-mode can actually coexist with very few conflicts, although
there would be some redundancy.
The key binding method is influenced by vi, although this isn't modal editing per se.
Here's a quote from Wikipedia on how vi works, in case you don't know:
vi is a modal editor: it operates in either insert mode (where typed text becomes part of the document) or normal mode (where keystrokes are interpreted as commands that control the edit session). For example, typing i while in normal mode switches the editor to insert mode, but typing i again at this point places an "i" character in the document. From insert mode, pressing ESC switches the editor back to normal mode.
Here's an illustration of Emacs, vi and lispy bindings for inserting a char and calling a command:
| insert "j" | forward-list | |
|---|---|---|
| Emacs | j | C-M-n |
| vi in insert mode | j | impossible |
| vi in normal mode | impossible | j |
| lispy | j | j |
Advantages/disadvantages:
- Emacs can both insert and call commands without switching modes (since it has none), but the command bindings are long
- vi has short command bindings, but you have to switch modes between inserting and calling commands
- lispy has short command bindings and doesn't need to switch modes
Of course it's not magic, lispy needs to have normal/insert mode to perform both functions with j. The difference from vi is that the mode is explicit instead of implicit - it's determined by the point position or the region state:
- you are in normal mode when the point is before/after paren or the region is active
- otherwise you are in insert mode
So people who generally like Emacs bindings (like me) can have the cake and eat it too (no dedicated insert mode + shorter key bindings). While people who like vi can still get an experience that's reasonably close to vi for LISP editing (since vi's line-based approach isn't very appropriate for LISP anyway).
But if you ask:
What if I want to insert when the point is before/after paren or the region is active?
The answer is that because of the LISP syntax you don't want to write this:
j(progn
(forward-char 1))kAlso, Emacs does nothing special by default when the region is active and you press a normal key, so new commands can be called in that situation.
-
Basic navigation by-list and by-region:
- h moves left
- j moves down
- k moves up
- l moves right
- f steps inside the list
- b moves back in history for all above commands
-
Paredit transformations, callable by plain letters:
- > slurps
- < barfs
- r raises
- C convolutes
- s moves down
- w moves up
-
IDE-like features for some Lisp languages:
- e evals
- E evals and inserts
- g jumps to any tag in the current directory with semantic
- G jumps to any tag in the current file
- M-. jumps to symbol, M-, jumps back
- F jumps to symbol, D jumps back
- C-1 shows documentation in an overlay
- C-2 shows arguments in an overlay
- Z breaks
out of
edebug, while storing current function's arguments
Some pictures here.
- Code manipulation:
- i prettifies code (remove extra space, hanging parens ...)
- xi transforms
condexpression to equivalentifexpressions - xc transforms
ifexpressions to an equivalentcondexpression - x> transforms expressions from/to an equivalent
thread-lastexpression - xf flattens function or macro call (extract body and substitute arguments)
- xr evals and replaces
- xl turns current
defuninto alambda - xd turns current
lambdainto adefun - O formats the code into one line
- M formats the code into multiple lines
- Misc. bindings:
- narrow/widen (N, W)
ediff(b, B)ert(T)edebug(xe)
Most functions are cataloged and described at http://abo-abo.github.io/lispy/.
It's easiest/recommended to install from MELPA.
Here's a minimal MELPA configuration for your ~/.emacs:
(package-initialize)
(add-to-list 'package-archives '("melpa" . "http://melpa.org/packages/"))Afterwards, M-x package-install RET lispy RET (you might want to M-x package-refresh-contents RET beforehand if you haven't done so recently).
el-get also features a lispy recipe. Use M-x el-get-install RET lispy RET to install.
Enable lispy automatically for certain modes
After installing, you can call M-x lispy-mode for any
buffer with a LISP dialect source. To have lispy-mode activated
automatically, use something like this:
(add-hook 'emacs-lisp-mode-hook (lambda () (lispy-mode 1)))Enable lispy for eval-expression
Although I prefer to eval things in *scratch*, sometimes
M-: - eval-expression is handy. Here's how to use lispy
in the minibuffer during eval-expression:
(defun conditionally-enable-lispy ()
(when (eq this-command 'eval-expression)
(lispy-mode 1)))
(add-hook 'minibuffer-setup-hook 'conditionally-enable-lispy)If you want to replace some of the lispy-mode's bindings you can do
it like this:
(eval-after-load "lispy"
`(progn
;; replace a global binding with own function
(define-key lispy-mode-map (kbd "C-e") 'my-custom-eol)
;; replace a global binding with major-mode's default
(define-key lispy-mode-map (kbd "C-j") nil)
;; replace a local binding
(lispy-define-key lispy-mode-map "s" 'lispy-down)))Use the lispy-compat variable to enable compatibility with modes that could otherwise conflict. These currently include:
- god-mode
- magit-blame-mode
- edebug
- cider
- macrostep
The default setting only enables compatibility with edebug.
The plain keys will call commands when:
- the point is positioned before paren
- the point is positioned after paren
- the region is active
When one of the first two conditions is true, I say that the point is
special. When the point is special, it's very clear to which sexp the
list-manipulating command will be applied to, what the result be and
where the point should end up afterwards. You can enhance this effect
with show-paren-mode or similar.
Here's an illustration to this effect, with lispy-clone (here, |
represents the point):
| before | key | after |
|---|---|---|
(looking-at "(")| |
c | (looking-at "(") |
(looking-at "(")| |
| before | key | after |
|---|---|---|
|(looking-at "(") |
c | |(looking-at "(") |
(looking-at "(") |
You can use plain Emacs navigation commands to get into special, or you can use some of the dedicated commands:
| Key Binding | Description |
|---|---|
| ] | lispy-forward - move to the end of the closest list, analogous to C-M-n (forward-list) |
| [ | lispy-backward - move to the start of the closest list, analogous to C-M-p (backward-list) |
| C-3 | lispy-right - exit current list forwards, analogous to up-list |
| ) | lispy-right-nostring exit current list forwards, but self-insert in strings and comments |
These are the few lispy commands that don't care whether the point is special or not. Other such bindings are DEL, C-d, C-k.
Special is useful for manipulating/navigating lists. If you want to manipulate symbols, use region selection instead.
When special, the digit keys call digit-argument which is very
useful since most lispy commands accept a numeric argument.
For instance, 3c is equivalent to ccc (clone sexp 3 times), and
4j is equivalent to jjjj (move point 4 sexps down).
Some useful applications are 9l and 9h - they exit list forwards
and backwards respectively at most 9 times which makes them
effectively equivalent to end-of-defun and beginning-of-defun. Or
you can move to the last sexp of the file with 999j.
To get out of the special position, you can use any of the good-old navigational commands such as C-f or C-n. Additionally SPC will break out of special to get around the situation when you have the point between the open parens like this
(|(
and want to start inserting; SPC will change the code to this:
(| (
Here's a list of commands for inserting pairs:
| key | command |
|---|---|
| ( | lispy-parens |
| { | lispy-braces |
| } | lispy-brackets |
| " | lispy-quotes |
A lot of Lispy commands come in pairs - one reverses the other:
| key | command | key | command |
|---|---|---|---|
| j | lispy-down |
k | lispy-up |
| s | lispy-move-down |
w | lispy-move-up |
| > | lispy-slurp |
< | lispy-barf |
| c | lispy-clone |
C-d or DEL | |
| C | lispy-convolute |
C | reverses itself |
| d | lispy-different |
d | reverses itself |
| M-j | lispy-split |
+ | lispy-join |
| O | lispy-oneline |
M | lispy-multiline |
| S | lispy-stringify |
C-u " | lispy-quotes |
| ; | lispy-comment |
C-u ; | lispy-comment |
| xi | lispy-to-ifs |
xc | lispy-to-cond |
| x> | lispy-toggle-thread-last |
x> | reverses itself |
These commands handle whitespace in addition to inserting the expected thing.
| key | command |
|---|---|
| SPC | lispy-space |
| : | lispy-colon |
| ^ | lispy-hat |
Most special commands will leave the point special after they're
done. This allows to chain them as well as apply them
continuously by holding the key. Some useful hold-able keys are
jkf<>cws;.
Not so useful, but fun is /: start it from |( position and hold
until all your Lisp code is turned into Python :).
| key | command |
|---|---|
| q | lispy-ace-paren |
| Q | lispy-ace-char |
| a | lispy-ace-symbol |
| H | lispy-ace-symbol-replace |
| - | lispy-ace-subword |
q - lispy-ace-paren jumps to a "(" character within current
top-level form (e.g. defun). It's much faster than typing in the
avy binding + selecting "(", and there's less candidates,
since they're limited to the current top-level form.
a - lispy-ace-symbol will let you select which symbol to
mark within current form. This can be followed up with e.g. eval,
describe, follow, raise etc. Or you can simply m to
deactivate the mark and edit from there.
- - lispy-ace-subword is a niche command for a neat combo. Start with:
(buffer-substring-no-properties
(region-beginning)|)
Type c, -, b and C-d to get:
(buffer-substring-no-properties
(region-beginning)
(region-|))
Fill end to finish the statement.
Sometimes the expression that you want to operate on isn't bounded by parens. In that case you can mark it with a region and operate on that.
While in special:
- Mark a sexp with m -
lispy-mark-list - Mark a symbol within sexp a -
lispy-ace-symbol.
While not in special:
- C-SPC -
set-mark-command - mark a symbol at point with M-m -
lispy-mark-symbol - mark containing expression (list or string or comment) with C-M-, -
lispy-mark
The arrow keys j/k will move the region up/down within the current list. The actual code will not be changed.
Use d - lispy-different to switch between different sides
of the region. The side is important since the grow/shrink operations
apply to current side of the region.
Use a combination of:
- > -
lispy-slurp- extend by one sexp from the current side. Use digit argument to extend by several sexps. - < -
lispy-barf- shrink by one sexp from the current side. Use digit argument to shrink by several sexps.
The other two arrow keys will mark the parent list of the current region:
- h -
lispy-left- mark the parent list with the point on the left - l -
lispy-right- mark the parent list with the point on the right
To do the reverse of the previous operation, i.e. to mark the first
child of marked list, use i - lispy-tab.
- m -
lispy-mark-list- deactivate region - c -
lispy-clone- clone region and keep it active - s -
lispy-move-down- move region one sexp down - w -
lispy-move-up- move region one sexp up - u -
lispy-undo- deactivate region and undo - t -
lispy-teleport- move region inside the sexp you select withlispy-ace-paren - C -
lispy-convolute- exchange the order of application of two sexps that contain region - n -
lispy-new-copy- copy region as kill without deactivating the mark - P -
lispy-paste- replace region with current kill
These features are specific to the Lisp dialect used. Currently Elisp
and Clojure (via cider) are supported. There's also basic
evaluation support for:
- Scheme (via
geiser) - Common lisp (via
slimeorsly). - Hy (via
comint).
lispy-goto
Bound to g.
Use completion to select a symbol to jump to from all top-level symbols in the in current directory.
Works out of the box for Elisp, Scheme and Common Lisp. clojure-semantic is required for Clojure.
- The older stuff can be found on vimeo.
- The newer stuff is on https://www.youtube.com/user/abo5abo/videos.