Introduction ============ This patch added intial support for bpf program compile once and run everywhere (CO-RE). The main motivation is for bpf program which depends on kernel headers which may vary between different kernel versions. The initial discussion can be found at https://lwn.net/Articles/773198/. Currently, bpf program accesses kernel internal data structure through bpf_probe_read() helper. The idea is to capture the kernel data structure to be accessed through bpf_probe_read() and relocate them on different kernel versions. On each host, right before bpf program load, the bpfloader will look at the types of the native linux through vmlinux BTF, calculates proper access offset and patch the instruction. To accommodate this, three intrinsic functions preserve_{array,union,struct}_access_index are introduced which in clang will preserve the base pointer, struct/union/array access_index and struct/union debuginfo type information. Later, bpf IR pass can reconstruct the whole gep access chains without looking at gep itself. This patch did the following: . An IR pass is added to convert preserve_*_access_index to global variable who name encodes the getelementptr access pattern. The global variable has metadata attached to describe the corresponding struct/union debuginfo type. . An SimplifyPatchable MachineInstruction pass is added to remove unnecessary loads. . The BTF output pass is enhanced to generate relocation records located in .BTF.ext section. Typical CO-RE also needs support of global variables which can be assigned to different values to different hosts. For example, kernel version can be used to guard different versions of codes. This patch added the support for patchable externals as well. Example ======= The following is an example. struct pt_regs { long arg1; long arg2; }; struct sk_buff { int i; struct net_device *dev; }; #define _(x) (__builtin_preserve_access_index(x)) static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) = (void *) 4; extern __attribute__((section(".BPF.patchable_externs"))) unsigned __kernel_version; int bpf_prog(struct pt_regs *ctx) { struct net_device *dev = 0; // ctx->arg* does not need bpf_probe_read if (__kernel_version >= 41608) bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg1)->dev)); else bpf_probe_read(&dev, sizeof(dev), _(&((struct sk_buff *)ctx->arg2)->dev)); return dev != 0; } In the above, we want to translate the third argument of bpf_probe_read() as relocations. -bash-4.4$ clang -target bpf -O2 -g -S trace.c The compiler will generate two new subsections in .BTF.ext, OffsetReloc and ExternReloc. OffsetReloc is to record the structure member offset operations, and ExternalReloc is to record the external globals where only u8, u16, u32 and u64 are supported. BPFOffsetReloc Size struct SecLOffsetReloc for ELF section #1 A number of struct BPFOffsetReloc for ELF section #1 struct SecOffsetReloc for ELF section clangupc#2 A number of struct BPFOffsetReloc for ELF section clangupc#2 ... BPFExternReloc Size struct SecExternReloc for ELF section #1 A number of struct BPFExternReloc for ELF section #1 struct SecExternReloc for ELF section clangupc#2 A number of struct BPFExternReloc for ELF section clangupc#2 struct BPFOffsetReloc { uint32_t InsnOffset; ///< Byte offset in this section uint32_t TypeID; ///< TypeID for the relocation uint32_t OffsetNameOff; ///< The string to traverse types }; struct BPFExternReloc { uint32_t InsnOffset; ///< Byte offset in this section uint32_t ExternNameOff; ///< The string for external variable }; Note that only externs with attribute section ".BPF.patchable_externs" are considered for Extern Reloc which will be patched by bpf loader right before the load. For the above test case, two offset records and one extern record will be generated: OffsetReloc records: .long .Ltmp12 # Insn Offset .long 7 # TypeId .long 242 # Type Decode String .long .Ltmp18 # Insn Offset .long 7 # TypeId .long 242 # Type Decode String ExternReloc record: .long .Ltmp5 # Insn Offset .long 165 # External Variable In string table: .ascii "0:1" # string offset=242 .ascii "__kernel_version" # string offset=165 The default member offset can be calculated as the 2nd member offset (0 representing the 1st member) of struct "sk_buff". The asm code: .Ltmp5: .Ltmp6: r2 = 0 r3 = 41608 .Ltmp7: .Ltmp8: .loc 1 18 9 is_stmt 0 # t.c:18:9 .Ltmp9: if r3 > r2 goto LBB0_2 .Ltmp10: .Ltmp11: .loc 1 0 9 # t.c:0:9 .Ltmp12: r2 = 8 .Ltmp13: .loc 1 19 66 is_stmt 1 # t.c:19:66 .Ltmp14: .Ltmp15: r3 = *(u64 *)(r1 + 0) goto LBB0_3 .Ltmp16: .Ltmp17: LBB0_2: .loc 1 0 66 is_stmt 0 # t.c:0:66 .Ltmp18: r2 = 8 .loc 1 21 66 is_stmt 1 # t.c:21:66 .Ltmp19: r3 = *(u64 *)(r1 + 8) .Ltmp20: .Ltmp21: LBB0_3: .loc 1 0 66 is_stmt 0 # t.c:0:66 r3 += r2 r1 = r10 .Ltmp22: .Ltmp23: .Ltmp24: r1 += -8 r2 = 8 call 4 For instruction .Ltmp12 and .Ltmp18, "r2 = 8", the number 8 is the structure offset based on the current BTF. Loader needs to adjust it if it changes on the host. For instruction .Ltmp5, "r2 = 0", the external variable got a default value 0, loader needs to supply an appropriate value for the particular host. Compiling to generate object code and disassemble: 0000000000000000 bpf_prog: 0: b7 02 00 00 00 00 00 00 r2 = 0 1: 7b 2a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r2 2: b7 02 00 00 00 00 00 00 r2 = 0 3: b7 03 00 00 88 a2 00 00 r3 = 41608 4: 2d 23 03 00 00 00 00 00 if r3 > r2 goto +3 <LBB0_2> 5: b7 02 00 00 08 00 00 00 r2 = 8 6: 79 13 00 00 00 00 00 00 r3 = *(u64 *)(r1 + 0) 7: 05 00 02 00 00 00 00 00 goto +2 <LBB0_3> 0000000000000040 LBB0_2: 8: b7 02 00 00 08 00 00 00 r2 = 8 9: 79 13 08 00 00 00 00 00 r3 = *(u64 *)(r1 + 8) 0000000000000050 LBB0_3: 10: 0f 23 00 00 00 00 00 00 r3 += r2 11: bf a1 00 00 00 00 00 00 r1 = r10 12: 07 01 00 00 f8 ff ff ff r1 += -8 13: b7 02 00 00 08 00 00 00 r2 = 8 14: 85 00 00 00 04 00 00 00 call 4 Instructions clangupc#2, clangupc#5 and clangupc#8 need relocation resoutions from the loader. Signed-off-by: Yonghong Song <yhs@fb.com> Differential Revision: https://reviews.llvm.org/D61524 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365503 91177308-0d34-0410-b5e6-96231b3b80d8

UPC-IR: parametrize Remote Pointer (RP) #2

Description

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions