A compact Lattice ECP5 based development board with breakouts for lots of high-speed I/O and serdes.
With onboard DDR3, High Speed USB and Ethernet.
- Latest Release: ButterStick r1.0
Previous Revisions:
- ECP5 25F/45F/85F (BGA381 package)
- USB 2.0 High Speed (480 Mbit/s)
- Gigabit Ethernet
- upto 8Gbit DDR3L RAM (dual rank)
- 128Mbit QSPI FLASH Memory (Bitstream + User storage)
- MicroSD socket (4 bit SD interface)
- Onboard oscillators:
- 30 MHz (ECP5's PLLs can create 60MHz,125MHz,etc.)
- 25 MHz (RGMII PHY)
- 0.1" pitch JTAG connector
- 7x User RGB LEDs
- 2x User Buttons
- 2x Standard SYZYGY compatible connectors
- Adjustable VCCIO 1.2V-3.3V
- Up to 32 single ended I/O
- 10 differential pairs
- Dedicated clock input pins
- 1x Transceiver SYZYGY compatible connector
- Adjustable VCCIO 1.2V-3.3V
- Up to 14 single ended I/O
- 2x/4x Lanes TX (5 Gbps SERDES)
- 2x/4x Lanes RX (5 Gbps SERDES)
- 1x Reference clock input
Board dimensions: 80mm x 49mm
The ButterStick can be configured in different variants, the part number defines which FPGA and DDR3 parts are installed.
ButterStick-r1.0-[Memory gigabits]-[FPGA density]
ButterStick-r1.0-2G-25F | ButterStick-r1.0-2G-85F | ButterStick-r1.0-8G-85F | |
---|---|---|---|
FPGA | LFE5UM5G-25F-8BG381C | LFE5UM5G-85F-8BG381C | LFE5UM5G-85F-8BG381C |
DDR3 | 2x MT41K64M16TW-107 | 2x MT41K64M16TW-107 | 2x MT41K256M16TW-107 |
The 25F also has the following limitations on the ButterStick:
- 25F Only provides 2x SERDES lanes.
- 25F does not connect I/O pins S8/S9 on SYZYGY.C
- Hardware in this repository is licensed under CERN OHL v1.2
This board is an OSHWA approved design: AU000016