HOWTO RaspberryPi connect by usb0

raspberry pi zero

activate usb0

  echo "dtoverlay=dwc2" | sudo tee -a /boot/config.txt
  echo "dwc2" | sudo tee -a /etc/modules
  echo "g_ether" | sudo tee -a /etc/modules

config network - add in /etc/network/interfaces

  allow-hotplug usb0
  iface usb0 inet static
    address 192.168.250.2
    netmask 255.255.255.0
    network 192.168.250.0
    broadcast 192.168.250.255
    gateway 192.168.250.1

install isc-dhcp-server

  apt-get -y install isc-dhcp-server

configure isc-dhcp-server

  subnet 192.168.250.0 netmask 255.255.255.0 {
    option broadcast-address 255.255.255.255;
    range 192.168.250.1 192.168.250.1;
  }

update resolv.conf (add line)

  nameserver 8.8.8.8

enable ssh (raspberry pi way)

  sudo raspi-config

your laptop

activate forward

  echo 1 > /proc/sys/net/ipv4/ip_forward
  iptables -t nat -A POSTROUTING -o $ETHX -j MASQUERADE

plug usb

plug data usb (not power) to laptop