Xcode Build for testing for iOS

Performs xcodebuild's build-for-testing action

Description

The Step runs Xcode's xcodebuild command with the build-for-testing option. This builds your app and associated tests so that you can, for example, upload it to a third-party testing service to run your tests on a real device. The Step also creates an .xctestrun file. To be able to run your tests on a real device it needs code signing. The Automatic code signing method Step input allows you to log you into your Apple Developer account based on the Apple service connection you provide on Bitrise and download any provisioning profiles needed for your project based on the Distribution method. Please note that the Automatic code signing method input is by default set to off, so if you need code signing, select either the api-key or the apple-idoption of the input.

Configuring the Step

Before you start:

• Make sure you have connected your Apple Service account to Bitrise. Alternatively, you can upload certificates and profiles to Bitrise manually, then use the Certificate and Profile Installer Step before this Step.
• Make sure certificates are uploaded to Bitrise's Code Signing tab. The right provisioning profiles are automatically downloaded from Apple as part of the automatic code signing process.

To configure the Step:

1. Project (or Workspace) path: This is the path where the .xcodeproj or .xcworkspace files are localed.
2. Scheme: Add the scheme name you wish to build for testing.
3. Build Configuration: If not specified, the default Build Configuration will be used. The input value sets xcodebuild's -configuration option.
4. Device destination specifier: Destination specifier describes the device to use as a destination. The input value sets xcodebuild's -destination option.

Under xcodebuild configuration 5. Build settings (xcconfig): Build settings to override the project's build settings. Can be the contents, file path or empty. 6. Additional options for the xcodebuild command: Additional options to be added to the executed xcodebuild command.

Under Xcode build log formatting:

1. Log formatter: Defines how xcodebuild command's log is formatted. Available options: xcpretty: The xcodebuild command's output will be prettified by xcpretty. xcodebuild: Only the last 20 lines of raw xcodebuild output will be visible in the build log. The raw xcodebuild log is exported in both cases.

Under Automatic code signing:

1. Automatic code signing method: Select the Apple service connection you want to use for code signing. Available options: off if you don't do automatic code signing, api-key if you use API key authorization, and apple-id if you use Apple ID authorization.
2. Register test devices on the Apple Developer Portal: If this input is set, the Step will register the known test devices on Bitrise from team members with the Apple Developer Portal. Note that setting this to yes may cause devices to be registered against your limited quantity of test devices in the Apple Developer Portal, which can only be removed once annually during your renewal window.
3. The minimum days the Provisioning Profile should be valid: If this input is set to >0, the managed Provisioning Profile will be renewed if it expires within the configured number of days. Otherwise the Step renews the managed Provisioning Profile if it is expired.
4. The Code signing certificate URL, the Code signing certificate passphrase, the Keychain path, and the Keychain password inputs are automatically populated if certificates are uploaded to Bitrise's Code Signing tab. If you store your files in a private repo, you can manually edit these fields.

If you want to set the Apple service connection credentials on the step-level (instead of using the one configured in the App Settings), use the Step inputs in the App Store Connect connection override category. Note that this only works if Automatic code signing method is set to api-key.

Under Step Output configuration:

1. Output directory path: This directory contains the generated artifacts.

Under Caching:

1. Enable collecting cache content: Defines what cache content should be automatically collected. Available options are:

• none: Disable collecting cache content
• swift_packages: Collect Swift PM packages added to the Xcode project

Under Debugging:

1. Verbose logging*: You can set this input to yes to produce more informative logs.

🧩 Get started

Add this step directly to your workflow in the Bitrise Workflow Editor.

You can also run this step directly with Bitrise CLI.

⚙️ Configuration

Inputs

Key	Description	Flags	Default
project_path	Xcode Project (.xcodeproj) or Workspace (.xcworkspace) path. The input value sets xcodebuild's -project or -workspace option.	required	$BITRISE_PROJECT_PATH
scheme	Xcode Scheme name. The input value sets xcodebuild's -scheme option.	required	$BITRISE_SCHEME
configuration	Xcode Build Configuration. If not specified, the default Build Configuration will be used. The input value sets xcodebuild's -configuration option.	required	Debug
destination	Destination specifier describes the device to use as a destination. Recommended values: - generic/platform=iOS to build tests for physical devices - generic/platform=iOS Simulator to build tests for Simulators The input value sets xcodebuild's -destination option.	required	generic/platform=iOS
test_plan	Build tests for a specific Test Plan associated with the Scheme. Leave this input empty to build all the Test Plans or Test Targets associated with the Scheme. The input value sets xcodebuild's -testPlan option.
xcconfig_content	Build settings to override the project's build settings, using xcodebuild's -xcconfig option. You can't define -xcconfig option in Additional options for the xcodebuild command if this input is set. If empty, no setting is changed. When set it can be either: 1. Existing .xcconfig file path. Example: ./ios-sample/ios-sample/Configurations/Dev.xcconfig 2. The contents of a newly created temporary .xcconfig file. (This is the default.) Build settings must be separated by newline character (\n). Example: COMPILER_INDEX_STORE_ENABLE = NO ONLY_ACTIVE_ARCH[config=Debug][sdk=*][arch=*] = YES		COMPILER_INDEX_STORE_ENABLE = NO
xcodebuild_options	Additional options to be added to the executed xcodebuild command. Prefer using Build settings (xcconfig) input for specifying -xcconfig option. You can't use both.
log_formatter	Defines how xcodebuild command's log is formatted. Available options: - xcpretty: The xcodebuild command’s output will be prettified by xcpretty. - xcodebuild: Only the last 20 lines of raw xcodebuild output will be visible in the build log. The raw xcodebuild log will be exported in both cases.	required	xcpretty
automatic_code_signing	This input determines which Bitrise Apple service connection should be used for automatic code signing. Available values: - off: Do not do any auto code signing. - api-key: Bitrise Apple Service connection with API Key. - apple-id: Bitrise Apple Service connection with Apple ID.	required	off
register_test_devices	If this input is set, the Step will register the known test devices on Bitrise from team members with the Apple Developer Portal. Note that setting this to yes may cause devices to be registered against your limited quantity of test devices in the Apple Developer Portal, which can only be removed once annually during your renewal window.	required	no
test_device_list_path	If this input is set, the Step will register the listed devices from this file with the Apple Developer Portal. The format of the file is a comma separated list of the identifiers. For example: 00000000–0000000000000001,00000000–0000000000000002,00000000–0000000000000003 And in the above example the registered devices appear with the name of Device 1, Device 2 and Device 3 in the Apple Developer Portal. Note that setting this will have a higher priority than the Bitrise provided devices list.
min_profile_validity	If this input is set to >0, the managed Provisioning Profile will be renewed if it expires within the configured number of days. Otherwise the Step renews the managed Provisioning Profile if it is expired.	required	0
apple_team_id	The Apple Developer Portal team to use for downloading code signing assets. Defining this is only required when Automatic Code Signing is set to apple-id and the connected account belongs to multiple teams.
certificate_url_list	URL of the code signing certificate to download. Multiple URLs can be specified, separated by a pipe (|) character. Local file path can be specified, using the file:// URL scheme.	required, sensitive	$BITRISE_CERTIFICATE_URL
passphrase_list	Passphrases for the provided code signing certificates. Specify as many passphrases as many Code signing certificate URL provided, separated by a pipe (|) character. Certificates without a passphrase: for using a single certificate, leave this step input empty. For multiple certificates, use the separator as if there was a passphrase (examples: pass|, |pass|, |)	sensitive	$BITRISE_CERTIFICATE_PASSPHRASE
keychain_path	Path to the Keychain where the code signing certificates will be installed.	required	$HOME/Library/Keychains/login.keychain
keychain_password	Password for the provided Keychain.	required, sensitive	$BITRISE_KEYCHAIN_PASSWORD
output_dir	This directory will contain the generated artifacts.	required	$BITRISE_DEPLOY_DIR
cache_level	Defines what cache content should be automatically collected. Available options: - none: Disable collecting cache content. - swift_packages: Collect Swift PM packages added to the Xcode project.	required	swift_packages
api_key_path	Local path or remote URL to the private key (p8 file) for App Store Connect API. This overrides the Bitrise-managed API connection, only set this input if you want to control the API connection on a step-level. Most of the time it's easier to set up the connection on the App Settings page on Bitrise. The input value can be a file path (eg. $TMPDIR/private_key.p8) or an HTTPS URL. This input only takes effect if the other two connection override inputs are set too (api_key_id, api_key_issuer_id).
api_key_id	Private key ID used for App Store Connect authentication. This overrides the Bitrise-managed API connection, only set this input if you want to control the API connection on a step-level. Most of the time it's easier to set up the connection on the App Settings page on Bitrise. This input only takes effect if the other two connection override inputs are set too (api_key_path, api_key_issuer_id).
api_key_issuer_id	Private key issuer ID used for App Store Connect authentication. This overrides the Bitrise-managed API connection, only set this input if you want to control the API connection on a step-level. Most of the time it's easier to set up the connection on the App Settings page on Bitrise. This input only takes effect if the other two connection override inputs are set too (api_key_path, api_key_id).
verbose_log	If this input is set, the Step will print additional logs for debugging.	required	no

Outputs

Environment Variable	Description
BITRISE_TEST_BUNDLE_PATH	Directory of the built targets' binaries and built associated tests.
BITRISE_TEST_BUNDLE_ZIP_PATH	Zipped directory of the built targets' binaries and built associated tests.
BITRISE_XCTESTRUN_FILE_PATH	File path of the built xctestrun file (example: $SYMROOT/ios-simple-objc_iphoneos12.0-arm64e.xctestrun). If Test Plan Step Input is set BITRISE_XCTESTRUN_FILE_PATH points to the provided Test Plan's xctestrun file. Otherwise points to the scheme's default Test Plan's xctestrun file (or to the first xctestrun without default Test Plan).
BITRISE_XCODE_RAW_RESULT_TEXT_PATH	File path of the raw xcodebuild build-for-testing command log.

🙋 Contributing

We welcome pull requests and issues against this repository.

For pull requests, work on your changes in a forked repository and use the Bitrise CLI to run step tests locally.

Learn more about developing steps:

• Create your own step
• Testing your Step