Panda PWR and AMS2

[Winky1st]

Hi all,
I’m planning to get a second AMS for my BBL P1S, and I’m considering the new AMS2, which has the internal drying feature, but obviously, it requires power.

What will happen if I use my Panda PWR to power both my P1S and the AMS 2 Pro Switching Adapter together? Will the load be too high for the Panda Power??

Will there be any future projects to implement Panda PWR for powering the new AMS2 units? (For example, having 4 AMS2 units would be nice if they could be powered by a single intelligent source that could power both the 4*AMS2 units - unless one is in printing status- and the printer, at the same time ?

thankyou

cheers

---- Translated for your convenience using ChatGPT----

大家好，
我打算为我的BBL P1S再买一个AMS，并且我在考虑新款AMS2，它有内置干燥功能，但显然它需要电力供应。

如果我用Panda PWR同时为我的P1S和AMS 2 Pro切换适配器供电，会发生什么？这个负载会不会对Panda Power太重？

以后是否有计划将Panda PWR用于为新款AMS2供电？（比如如果4个AMS2设备能够由一个智能电源同时为这四个AMS2设备（除非其中一个正在打印）和打印机供电，那就太好了。）

谢谢！干杯！

[bigtreetech]

The PWR will be good to power the AMS2 and the P1S although you'll need a Y splitter at the output.

Future PWR versions may have separate outputs for additional AMS2 units ;) Let's see.

[Winky1st]

The PWR will be good to power the AMS2 and the P1S although you'll need a Y splitter at the output.

Future PWR versions may have separate outputs for additional AMS2 units ;) Let's see.

Thank you brother for super fast reply... very interesting matter! you rock as usual!
Will be a nice dream and integration.
Ciao
cheers