[FR] IDEA: Iconpack 'The Round Miracle' - Update for SW v26.x @ 2020/11/04

[Acenotass]

Big SW 26.x update @ 2020/08/07. Added 9 new icons, redrawn 4 old ones.
UPD: @ 2020/08/13 Redrawn: RGB_Settings.bmp. Removed: Silent_Off.bmp, Silent_On.bmp. Added: Sound.bmp. Swap: Tuning.bmp <--> Parameter.bmp
UPD: @ 2020/08/26 Minor redrawn: BigTreeTech.bmp, Marlin.bmp, EEProm_Reset.bmp, EEProm_Restore.bmp, Z_Fade.bmp
UPD: @ 2020/09/04 Added: Tune_Extruder.bmp, Apply.bmp. Removed: XY_Unlock.bmp, Extrude_100.bmp, S_Save.bmp, S_Load.bmp
UPD: @ 2020/11/04 Added: Case_Light.bmp. Minor redrawn: Chamber.bmp, Nozzle_Down.bmp, Nozzle_Up.bmp, Folder.bmp, Dec.bmp, Inc.bmp, Machine_Settings.bmp, Status_Bed.bmp, Status_Fan.bmp, Status_Flow.bmp, Status_Nozzle.bmp, Status_Speed.bmp, Parameter.bmp

TFT24 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip
TFT28 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip
TFT35 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip
TFT43 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip
TFT50 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip
TFT70 Iconpack 'The Round Miracle' by Acenotass for v26.x@2020.11.04.zip

[Mistigris18]

tu est très réactif 👍

[DrumClock]

HI,
again some new icons have been added.
Please update, Thanks

[Mistigris18]

Regarde bien, ils y sont 😉

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[oldman4U]

@Acenotass

Are you going to add the missing extruder tune icon?

[el-quique]

Nice job. The only change if you can make is: Extrude_100.bmp to Tune_Extruder.bmp
Thx

[Acenotass]

@oldman4U Done!

[oldman4U]

Hi.

Could you please check #1187 to see if this would be something you would also like do with your theme.

Thank you

[Acenotass]

hi!
@oldman4U
If you want you can include it in the firmware, maybe it makes sense to make a mechanism for easier changing of themes. Thanks.

[oldman4U]

I will mention you as the one who provided the theme. Ok!? Maybe I can not do it, because the whole package becomes too big... Will see. Acenotass <notifications@github.com> schrieb am Mo. 2. Nov. 2020 um 14:29:

…

hi! @oldman4U <https://github.com/oldman4U> If you want you can include it in the firmware, maybe it makes sense to make a mechanism for easier changing of themes. Thanks. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#935 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AM6XKZBO2A34H6M2VZABSYTSN2X3NANCNFSM4PXWTEHA> .

[oldman4U]

Is this OK?

[Acenotass]

@oldman4U ok

[cimoalpacino]

Great work! Thank you for sharing your design 👍

[Mistigris18]

Très bon travail , merci je les utilises sur toutes mes imprimantes 👍👍

[oldman4U]

Hi.

Somehow the Case light and chamber icons of the TFT35 folder seem to be broken. Could you please check.

Thank you

[oldman4U]

And some more, like Apply Dec, Folder, Inc, Level Edge Distance, Machine Settings, Nozzle Up and Down, Parameter, PID, Status Bed, Flow, Nozzle and Speed, Tune Extruder and Tuning.

[oldman4U]

All others seem to be OK.

[Acenotass]

HI @oldman4U
I downloaded the archive from the post for TFT35, found no problems. What is your problem?
Perhaps the problem you had was that you could not open the BMP v1 format. I have converted all images to BMP v3 format, now there should be no problems with opening.

[oldman4U]

Look at the attached screenshot.

Previous packs are fine. Only the newly added items seem to have the issue.

[Acenotass]

re-download archive TFT35

[oldman4U]

Perfect!!

Thank you

[oldman4U]

I had to start a new PR, #1251 is now used. Please check if everything is fine.

Thank you

[Acenotass]

@oldman4U
what do you think of this icon?

[oldman4U]

I would keep it more simple. The icons are already hard to understand especially on small tfts. Acenotass <notifications@github.com> schrieb am Mi. 18. Nov. 2020 um 16:45:

…

@oldman4U <https://github.com/oldman4U> what do you think of this icon? [image: BabyStep] <https://user-images.githubusercontent.com/44540957/99552535-4f53ac80-29e7-11eb-9479-46827b524b8d.png> — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#935 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AM6XKZDHSBTUOQNQFXFJKMTSQPTZDANCNFSM4PXWTEHA> .

[oldman4U]

Hi. If you want you can close this ticket now.

Thank you

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.