Add cold extrusion check, bug fixes, Cleanup and remove duplicate cod…

…es (bigtreetech#1384)

Copy to SD Card root directory to update/Language Packs/language_am.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_ca.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_cn.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_cz.ini

@@ -284,7 +284,8 @@ label_case_light:Osvětlení
 label_load_started:Probíhá zavádění filamentu.\nNení možná další akce,\ndokud to nebude dokončeno.\nProsím čekejte.
 label_unload_started:Probíhá vysunování filamentu.\nNení možná další akce,\ndokud to nebude dokončeno.\nProsím čekejte..
 label_heaters_on:Topení jsou stále zapnutá.\nChcete je vypnout?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_de.ini

@@ -281,10 +281,11 @@ label_notifications:Benachrichtigungen
 label_mesh_editor:Mesh edit.
 label_mesh_tuner:Mesh anp.
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_du.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_en.ini

@@ -160,8 +160,8 @@ label_continue:Continue
 label_cancel:Cancel
 label_adjust_title:Touch Screen Calibration
 label_adjust_info:Please click on the red dot
-label_adjust_ok:Adjustment Success
-label_adjust_failed:Adjustment failed, Please Try Again
+label_adjust_ok:Adjustment success
+label_adjust_failed:Adjustment failed, please try again
 label_warning:Warning
 label_stop_print:Stop printing?
 label_confirm:OK
@@ -265,7 +265,7 @@ label_pid_start_info_3:Do not touch the screen until completed (green LED ON)!
 label_tune_extruder:Tune steps
 label_tune_ext_extrude_100:Ext. 100mm
 label_tune_ext_temp:Extruder tuning | Heat
-label_tune_ext_templow:Desired temperature too low!\nMinimum temperature: %d C
+label_tune_ext_templow:Desired temperature too low!\nMinimum temperature: %d℃
 label_tune_ext_desiredval:Temperature is not yet at the desired value
 label_tune_ext_mark120mm:Mark 120 mm on your fillament\nPress '%s' when ready\nMeasure remaining length\nafter extruding
 label_tune_ext_heatoff:Turn the heater off?
@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_es.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_fr.ini

@@ -284,7 +284,8 @@ label_case_light:Caisson
 label_load_started:Chargement du filament en cours.\nAucune action possible avant\nla fin du processus.\nVeuillez patienter.
 label_unload_started:Déchargement du filament en cours.\nAucune action possible avant\nla fin du processus.\nVeuillez patienter.
 label_heaters_on:Certains éléments sont\ntoujours en chauffe.\nVoulez-vous les arrêter ?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_gr.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_hu.ini

@@ -284,7 +284,8 @@ label_case_light:Gépház Világítás
 label_load_started:A filament betöltése folyamatban van,\nnem lehetséges további művelet,\nmíg véget nem ér.\nKérlek várj!
 label_unload_started:A filament kiadása folyamatban van,\nnem lehetséges további művelet,\nmíg véget nem ér.\nKérlek várj!
 label_heaters_on:Néhány fűtőelem még üzemel.\nKikapcsolod a fűtőelemeket?
-label_print_total_time:Nyomtatás kész.\nEltelt idő: %02u:%02u:%02u \n
-label_print_filament_used:Felhasznált anyag: %3.2f méter
-label_print_summary:Összegzés
+label_print_summary:Eltelt idő: %02u:%02u:%02u\nFelhasznált anyag: %3.2f méter
+label_print_complete:Nyomtatás kész.
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_it.ini

@@ -284,6 +284,8 @@ label_case_light:Luce
 label_load_started:Carico filamento in corso...\nNon sono possibili altre\nazioni fino al termine.\nAttendere prego.
 label_unload_started:Scarico filamento in corso...\nNon sono possibili altre\nazioni fino al termine.\nAttendere prego.
 label_heaters_on:Alcuni riscaldatori sono ancora accesi\nVuoi spegnerli?
-label_print_total_time:Stampa completata.\nDurata totale: %02u:%02u:%02u \n
-label_print_filament_used:Filamento usato: %3.2f metri
-label_print_summary:Sommario
+label_print_summary:Durata totale: %02u:%02u:%02u\nFilamento usato: %3.2f metri
+label_print_complete:Stampa completata
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
+

Copy to SD Card root directory to update/Language Packs/language_jp.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_pl.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_pt.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_ru.ini

@@ -284,7 +284,8 @@ label_case_light:Подсветка
 label_load_started:Загрузка филамента начата.\nДождитесь пока сопло достигнет\nнеобходимой температуры.\nПожалуйста подождите.
 label_unload_started:Выгрузка филамента начата.\nДождитесь пока сопло достигнет\nнеобходимой температуры.\nПожалуйста подождите.
 label_heaters_on:Некоторые нагреватели все еще работают.\nХотите прервать нагрев?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_sk.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_sl.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_tc.ini

@@ -281,10 +281,11 @@ label_notifications:Notifications
 label_mesh_editor:Mesh edit
 label_mesh_tuner:Mesh tuner
 label_case_light:Case light
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Print complete.\nPrint Time: %02u:%02u:%02u \n
-label_print_filament_used:Filament Used: %3.2f meters
-label_print_summary:Print Summary Popup
+label_print_summary:Print Time: %02u:%02u:%02u\nFilament Used: %3.2f meters
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented
 

Copy to SD Card root directory to update/Language Packs/language_tr.ini

@@ -281,10 +281,11 @@ label_notifications:Bildirimler
 label_mesh_editor:Mesh düzenle
 label_mesh_tuner:Mesh ayarlayıcı
 label_case_light:Aydınlatma
-label_load_started:Filament load in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
-label_unload_started:Filament unload in progress.\nNo further actions possible\nuntil it's done.\nPlease stand by.
+label_load_started:Loading filament.\nPlease wait for the process\nto complete.
+label_unload_started:Unloading filament.\nPlease wait for the process\nto complete.
 label_heaters_on:Some heaters are still ON.\nDo you want to stop them?
-label_print_total_time:Baskı tamamlandı.\nBaskı Süresi: %02u:%02u:%02u \n
-label_print_filament_used:Kullanılan Filaman: %3.2f metre
-label_print_summary:Baskı Özeti
+label_print_summary:Baskı Süresi: %02u:%02u:%02u\nKullanılan Filaman: %3.2f metre
+label_print_complete:Print complete
+label_ext_templow:Hotend temperature is below\nminimum temperature (%d℃).
+label_cold_ext:Cold extrusion prevented