Keyboardio Model 01 Firmware

The default firmware for the Keyboardio Model 01

Download and install

Set up the Arduino IDE

Setup the Arduino IDE on your system. Make sure you install at least version 1.6, since older version may not support all required features.

macOS

On macOS, install the Arduino IDE using homebrew cask with brew cask install arduino or download the application from the official website and move it to your /Applications folder.

Linux

On Linux, your distribution's package manager probably includes the Arduino IDE, but it may be an out of date version. If your distribution installs a version of Arduino before 1.6.3 or so, you'll need to install the Arduino IDE following the instructions on the wiki.

If you install Arduino into some place that's /not/ /usr/local/arduino, you'll need to set the $ARDUINO_PATH environment variable to the directory containing the arduino and arduino-builder binaries.

Create and navigate to the Arduino Sketchbook directory

MacOS

mkdir -p $HOME/Documents/Arduino
cd $HOME/Documents/Arduino 

Linux

mkdir -p $HOME/Arduino
cd $HOME/Arduino 

Download hardware platform, including library source code

mkdir -p hardware/keyboardio

## then clone the hardware definitions to make them available to the arduino environment
git clone --recursive https://github.com/keyboardio/Arduino-Boards.git hardware/keyboardio/avr

Download the Model 01 Firmware

git clone https://github.com/keyboardio/Model01-Firmware.git

Build and flash the firmware from the commandline

cd Model01-Firmware
make flash

When the builder tells you to hit Enter to continue, hold down "Prog" on your keyboard and hit Enter.

Thanks!

<3 jesse