Skip to content

Commit

Permalink
stm32/uart: Add UART RX/CTS pin pull config options.
Browse files Browse the repository at this point in the history 
The UART driver enables a pull-up on RX/CTS pins by default.  This can
cause UART to fail to receive in certain situations, eg with RS485
transceivers.

This commit adds compile-time configuration options to set the pull mode on
the RX and CTS pins of each UART.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
  • Loading branch information
@iabdalkader @dpgeorge
iabdalkader authored and dpgeorge committed Sep 24, 2024
1 parent 3e085c3 commit eec5eb4
Showing 1 changed file with 70 additions and 4 deletions.
74 changes: 70 additions & 4 deletions ports/stm32/uart.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -252,6 +252,9 @@ bool uart_init(machine_uart_obj_t *uart_obj,

const machine_pin_obj_t *pins[4] = {0};

// Default pull is pull-up on RX and CTS (the input pins).
uint32_t pins_pull[4] = { GPIO_NOPULL, GPIO_PULLUP, GPIO_NOPULL, GPIO_PULLUP };

switch (uart_obj->uart_id) {
#if defined(MICROPY_HW_UART1_TX) && defined(MICROPY_HW_UART1_RX)
case PYB_UART_1:
Expand All @@ -270,6 +273,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART1_CTS;
}
#endif
#if defined(MICROPY_HW_UART1_RX_PULL)
pins_pull[1] = MICROPY_HW_UART1_RX_PULL;
#endif
#if defined(MICROPY_HW_UART1_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART1_CTS_PULL;
#endif
__HAL_RCC_USART1_CLK_ENABLE();
break;
#endif
Expand All @@ -295,6 +304,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART2_CTS;
}
#endif
#if defined(MICROPY_HW_UART2_RX_PULL)
pins_pull[1] = MICROPY_HW_UART2_RX_PULL;
#endif
#if defined(MICROPY_HW_UART2_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART2_CTS_PULL;
#endif
__HAL_RCC_USART2_CLK_ENABLE();
break;
#endif
Expand Down Expand Up @@ -322,6 +337,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART3_CTS;
}
#endif
#if defined(MICROPY_HW_UART3_RX_PULL)
pins_pull[1] = MICROPY_HW_UART3_RX_PULL;
#endif
#if defined(MICROPY_HW_UART3_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART3_CTS_PULL;
#endif
__HAL_RCC_USART3_CLK_ENABLE();
break;
#endif
Expand Down Expand Up @@ -358,6 +379,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART4_CTS;
}
#endif
#if defined(MICROPY_HW_UART4_RX_PULL)
pins_pull[1] = MICROPY_HW_UART4_RX_PULL;
#endif
#if defined(MICROPY_HW_UART4_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART4_CTS_PULL;
#endif
break;
#endif

Expand Down Expand Up @@ -393,6 +420,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART5_CTS;
}
#endif
#if defined(MICROPY_HW_UART5_RX_PULL)
pins_pull[1] = MICROPY_HW_UART5_RX_PULL;
#endif
#if defined(MICROPY_HW_UART5_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART5_CTS_PULL;
#endif
break;
#endif

Expand All @@ -419,6 +452,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART6_CTS;
}
#endif
#if defined(MICROPY_HW_UART6_RX_PULL)
pins_pull[1] = MICROPY_HW_UART6_RX_PULL;
#endif
#if defined(MICROPY_HW_UART6_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART6_CTS_PULL;
#endif
__HAL_RCC_USART6_CLK_ENABLE();
break;
#endif
Expand Down Expand Up @@ -447,6 +486,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART7_CTS;
}
#endif
#if defined(MICROPY_HW_UART7_RX_PULL)
pins_pull[1] = MICROPY_HW_UART7_RX_PULL;
#endif
#if defined(MICROPY_HW_UART7_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART7_CTS_PULL;
#endif
break;
#endif

Expand Down Expand Up @@ -474,6 +519,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_UART8_CTS;
}
#endif
#if defined(MICROPY_HW_UART8_RX_PULL)
pins_pull[1] = MICROPY_HW_UART8_RX_PULL;
#endif
#if defined(MICROPY_HW_UART8_CTS_PULL)
pins_pull[3] = MICROPY_HW_UART8_CTS_PULL;
#endif
break;
#endif

Expand All @@ -485,6 +536,9 @@ bool uart_init(machine_uart_obj_t *uart_obj,
__HAL_RCC_UART9_CLK_ENABLE();
pins[0] = MICROPY_HW_UART9_TX;
pins[1] = MICROPY_HW_UART9_RX;
#if defined(MICROPY_HW_UART9_RX_PULL)
pins_pull[1] = MICROPY_HW_UART9_RX_PULL;
#endif
break;
#endif

Expand All @@ -502,6 +556,9 @@ bool uart_init(machine_uart_obj_t *uart_obj,
#endif
pins[0] = MICROPY_HW_UART10_TX;
pins[1] = MICROPY_HW_UART10_RX;
#if defined(MICROPY_HW_UART10_RX_PULL)
pins_pull[1] = MICROPY_HW_UART10_RX_PULL;
#endif
break;
#endif

Expand All @@ -527,6 +584,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_LPUART1_CTS;
}
#endif
#if defined(MICROPY_HW_LPUART1_RX_PULL)
pins_pull[1] = MICROPY_HW_LPUART1_RX_PULL;
#endif
#if defined(MICROPY_HW_LPUART1_CTS_PULL)
pins_pull[3] = MICROPY_HW_LPUART1_CTS_PULL;
#endif
__HAL_RCC_LPUART1_CLK_ENABLE();
break;
#endif
Expand All @@ -551,6 +614,12 @@ bool uart_init(machine_uart_obj_t *uart_obj,
pins[3] = MICROPY_HW_LPUART2_CTS;
}
#endif
#if defined(MICROPY_HW_LPUART2_RX_PULL)
pins_pull[1] = MICROPY_HW_LPUART2_RX_PULL;
#endif
#if defined(MICROPY_HW_LPUART2_CTS_PULL)
pins_pull[3] = MICROPY_HW_LPUART2_CTS_PULL;
#endif
__HAL_RCC_LPUART2_CLK_ENABLE();
break;
#endif
Expand All @@ -564,10 +633,7 @@ bool uart_init(machine_uart_obj_t *uart_obj,

for (uint i = 0; i < 4; i++) {
if (pins[i] != NULL) {
// Configure pull-up on RX and CTS (the input pins).
uint32_t pull = (i & 1) ? MP_HAL_PIN_PULL_UP : MP_HAL_PIN_PULL_NONE;
bool ret = mp_hal_pin_config_alt(pins[i], mode, pull, uart_fn, uart_unit);
if (!ret) {
if (!mp_hal_pin_config_alt(pins[i], mode, pins_pull[i], uart_fn, uart_unit)) {
return false;
}
}
Expand Down

0 comments on commit eec5eb4

Please sign in to comment.