Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  ARM: 6945/1: Add unwinding support for division functions
  ARM: kill pmd_off()
  ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
  ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
  ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
  ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
  ARM: add sendmmsg syscall
  ARM: 6863/1: allow hotplug on msm
  ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
  ARM: 6830/1: mach-ux500: force PrimeCell revisions
  ARM: 6829/1: amba: make hardcoded periphid override hardware
  ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
  ARM: 6827/1: mach-netx: delete hardcoded periphid
  ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
  ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
  ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
  ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
  at91: drop at572d940hf support
  at91rm9200: introduce at91rm9200_set_type to specficy cpu package
  at91: drop boot_params and PLAT_PHYS_OFFSET
  ...

Documentation/arm/Booting

@@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document.
 The boot loader must ultimately be able to provide a MACH_TYPE_xxx
 value to the kernel. (see linux/arch/arm/tools/mach-types).
 
-
-4. Setup the kernel tagged list
--------------------------------
+4. Setup boot data
+------------------
 
 Existing boot loaders:		OPTIONAL, HIGHLY RECOMMENDED
 New boot loaders:		MANDATORY
 
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel.  The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
 The boot loader must create and initialise the kernel tagged list.
 A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
 The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
@@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither
 the kernel decompressor nor initrd 'bootp' program will overwrite
 it.  The recommended placement is in the first 16KiB of RAM.
 
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data.  The
+dtb format is documented in Documentation/devicetree/booting-without-of.txt.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location.  The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it.  The recommended placement is in the first 16KiB of RAM
+with the caveat that it may not be located at physical address 0 since
+the kernel interprets a value of 0 in r2 to mean neither a tagged list
+nor a dtb were passed.
+
 5. Calling the kernel image
 ---------------------------
 
@@ -125,7 +149,8 @@ In either case, the following conditions must be met:
 - CPU register settings
   r0 = 0,
   r1 = machine type number discovered in (3) above.
-  r2 = physical address of tagged list in system RAM.
+  r2 = physical address of tagged list in system RAM, or
+       physical address of device tree block (dtb) in system RAM
 
 - CPU mode
   All forms of interrupts must be disabled (IRQs and FIQs)

Documentation/arm/Samsung/Overview.txt

@@ -14,7 +14,6 @@ Introduction
   - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
   - S3C64XX: S3C6400 and S3C6410
   - S5P6440
-  - S5P6442
   - S5PC100
   - S5PC110 / S5PV210
 
@@ -36,7 +35,6 @@ Configuration
   unifying all the SoCs into one kernel.
 
   s5p6440_defconfig - S5P6440 specific default configuration
-  s5p6442_defconfig - S5P6442 specific default configuration
   s5pc100_defconfig - S5PC100 specific default configuration
   s5pc110_defconfig - S5PC110 specific default configuration
   s5pv210_defconfig - S5PV210 specific default configuration

Documentation/devicetree/booting-without-of.txt

@@ -12,8 +12,9 @@ Table of Contents
 =================
 
   I - Introduction
-    1) Entry point for arch/powerpc
-    2) Entry point for arch/x86
+    1) Entry point for arch/arm
+    2) Entry point for arch/powerpc
+    3) Entry point for arch/x86
 
   II - The DT block format
     1) Header
@@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering
 it with special cases.
 
 
-1) Entry point for arch/powerpc
+1) Entry point for arch/arm
+---------------------------
+
+   There is one single entry point to the kernel, at the start
+   of the kernel image. That entry point supports two calling
+   conventions.  A summary of the interface is described here.  A full
+   description of the boot requirements is documented in
+   Documentation/arm/Booting
+
+        a) ATAGS interface.  Minimal information is passed from firmware
+        to the kernel with a tagged list of predefined parameters.
+
+                r0 : 0
+
+                r1 : Machine type number
+
+                r2 : Physical address of tagged list in system RAM
+
+        b) Entry with a flattened device-tree block.  Firmware loads the
+        physical address of the flattened device tree block (dtb) into r2,
+        r1 is not used, but it is considered good practise to use a valid
+        machine number as described in Documentation/arm/Booting.
+
+                r0 : 0
+
+                r1 : Valid machine type number.  When using a device tree,
+                a single machine type number will often be assigned to
+                represent a class or family of SoCs.
+
+                r2 : physical pointer to the device-tree block
+                (defined in chapter II) in RAM.  Device tree can be located
+                anywhere in system RAM, but it should be aligned on a 64 bit
+                boundary.
+
+   The kernel will differentiate between ATAGS and device tree booting by
+   reading the memory pointed to by r2 and looking for either the flattened
+   device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
+   offset 0x4 from r2 (0x54410001).
+
+2) Entry point for arch/powerpc
 -------------------------------
 
    There is one single entry point to the kernel, at the start
@@ -226,7 +266,7 @@ it with special cases.
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
-2) Entry point for arch/x86
+3) Entry point for arch/x86
 -------------------------------
 
   There is one single 32bit entry point to the kernel at code32_start,

arch/arm/Kconfig

@@ -294,6 +294,8 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select ARM_PATCH_PHYS_VIRT if MMU
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -730,16 +732,6 @@ config ARCH_S5P64X0
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
 
-config ARCH_S5P6442
-	bool "Samsung S5P6442"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	help
-	  Samsung S5P6442 CPU based systems
-
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select GENERIC_GPIO
@@ -991,8 +983,6 @@ endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
-source "arch/arm/mach-s5p6442/Kconfig"
-
 source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
@@ -1399,7 +1389,6 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
-	depends on !ARCH_MSM
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1420,7 +1409,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
-		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
@@ -1516,6 +1505,9 @@ config ARCH_SPARSEMEM_DEFAULT
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
+config HAVE_ARCH_PFN_VALID
+	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
@@ -1683,6 +1675,13 @@ endmenu
 
 menu "Boot options"
 
+config USE_OF
+	bool "Flattened Device Tree support"
+	select OF
+	select OF_EARLY_FLATTREE
+	help
+	  Include support for flattened device tree machine descriptions.
+
 # Compressed boot loader in ROM.  Yes, we really want to ask about
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
@@ -2021,7 +2020,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
+	depends on !ARCH_S5P64X0 && !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/Makefile

@@ -176,7 +176,6 @@ machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4

arch/arm/common/Kconfig

@@ -7,7 +7,7 @@ config ARM_VIC
 config ARM_VIC_NR
 	int
 	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5P6442 || ARCH_S5PC100
+	default 3 if ARCH_S5PC100
 	default 2
 	depends on ARM_VIC
 	help