airRohr Sensor Firmware for SPS30, SDS011, DHT22, BMP180, BMP/E 280 and many more

Features:

• many environmental and air quality sensors can be used concurrently
• Integration in Sensor.Community (formerly Luftdaten.Info)
• Configuration via HTTP in local WiFi or with a Sensor-as Access-Point
• Support for OLED- and LCD-Displays (SSD1306, SH1106 and LCD1602, LCD2004)
• Wide selection of API integrations for measurement reporting
• Ability to print measurements as CSV via USB-serial
• Used with ESP8266 (NodeMCU v2/v3 and compatible) and ESP32 (experimental)

Buttons Control

Insight

• UP or DOWN short press - show graphs screen or change graphs screen
• SET short press - show main screen or refresh main screen
• SET + DOWN long press (4s) - reset WiFi configuration
• SET + DOWN are pressed while turn on - reset all configuration

Urban

• SET long press (4s) - reset WiFi configuration
• SET is pressed while turn on - reset all configuration

Contributing

To add your Connectivity Robonomics Server to sensors firmware fork this repository and edit robonomics_servers.h file. Add your server in a list in the following format:

{"<server_address>", <Region>}

Use one of the following variables fo region:

INTL_REGION_GLOBAL - Global Servers
INTL_REGION_EU - Europe
INTL_REGION_AS - Asia
INTL_REGION_AF - Africa
INTL_REGION_AU - Australia
INTL_REGION_NA - North America
INTL_REGION_SA - South America

For example:

{"connectivity.robonomics.network", INTL_REGION_GLOBAL}

Then make a pull request.