Merge branch 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/s…

…cm/linux/kernel/git/tip/tip

Pull x86 LTO changes from Peter Anvin:
 "More infrastructure work in preparation for link-time optimization
  (LTO).  Most of these changes is to make sure symbols accessed from
  assembly code are properly marked as visible so the linker doesn't
  remove them.

  My understanding is that the changes to support LTO are still not
  upstream in binutils, but are on the way there.  This patchset should
  conclude the x86-specific changes, and remaining patches to actually
  enable LTO will be fed through the Kbuild tree (other than keeping up
  with changes to the x86 code base, of course), although not
  necessarily in this merge window"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  Kbuild, lto: Handle basic LTO in modpost
  Kbuild, lto: Disable LTO for asm-offsets.c
  Kbuild, lto: Add a gcc-ld script to let run gcc as ld
  Kbuild, lto: add ld-version and ld-ifversion macros
  Kbuild, lto: Drop .number postfixes in modpost
  Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
  lto: Disable LTO for sys_ni
  lto: Handle LTO common symbols in module loader
  lto, workaround: Add workaround for initcall reordering
  lto: Make asmlinkage __visible
  x86, lto: Disable LTO for the x86 VDSO
  initconst, x86: Fix initconst mistake in ts5500 code
  initconst: Fix initconst mistake in dcdbas
  asmlinkage: Make trace_hardirqs_on/off_caller visible
  asmlinkage, x86: Fix 32bit memcpy for LTO
  asmlinkage Make __stack_chk_failed and memcmp visible
  asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
  asmlinkage: Make main_extable_sort_needed visible
  asmlinkage, mutex: Mark __visible
  asmlinkage: Make trace_hardirq visible
  ...

arch/x86/kernel/time.c

@@ -23,7 +23,7 @@
 #include <asm/time.h>
 
 #ifdef CONFIG_X86_64
-DEFINE_VVAR(volatile unsigned long, jiffies) = INITIAL_JIFFIES;
+__visible DEFINE_VVAR(volatile unsigned long, jiffies) = INITIAL_JIFFIES;
 #endif
 
 unsigned long profile_pc(struct pt_regs *regs)

arch/x86/lib/memcpy_32.c

@@ -4,7 +4,7 @@
 #undef memcpy
 #undef memset
 
-void *memcpy(void *to, const void *from, size_t n)
+__visible void *memcpy(void *to, const void *from, size_t n)
 {
 #ifdef CONFIG_X86_USE_3DNOW
 	return __memcpy3d(to, from, n);
@@ -14,13 +14,13 @@ void *memcpy(void *to, const void *from, size_t n)
 }
 EXPORT_SYMBOL(memcpy);
 
-void *memset(void *s, int c, size_t count)
+__visible void *memset(void *s, int c, size_t count)
 {
 	return __memset(s, c, count);
 }
 EXPORT_SYMBOL(memset);
 
-void *memmove(void *dest, const void *src, size_t n)
+__visible void *memmove(void *dest, const void *src, size_t n)
 {
 	int d0,d1,d2,d3,d4,d5;
 	char *ret = dest;

arch/x86/platform/ts5500/ts5500.c

@@ -88,7 +88,7 @@ struct ts5500_sbc {
 static const struct {
 	const char * const string;
 	const ssize_t offset;
-} ts5500_signatures[] __initdata = {
+} ts5500_signatures[] __initconst = {
 	{ "TS-5x00 AMD Elan", 0xb14 },
 };
 

arch/x86/vdso/Makefile

@@ -2,6 +2,8 @@
 # Building vDSO images for x86.
 #
 
+KBUILD_CFLAGS += $(DISABLE_LTO)
+
 VDSO64-$(CONFIG_X86_64)		:= y
 VDSOX32-$(CONFIG_X86_X32_ABI)	:= y
 VDSO32-$(CONFIG_X86_32)		:= y
@@ -35,7 +37,8 @@ export CPPFLAGS_vdso.lds += -P -C
 
 VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
 			-Wl,--no-undefined \
-		      	-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
+			-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 \
+			$(DISABLE_LTO)
 
 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
 
@@ -127,7 +130,7 @@ vdso32.so-$(VDSO32-y)		+= sysenter
 vdso32-images			= $(vdso32.so-y:%=vdso32-%.so)
 
 CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-m,elf_i386 -Wl,-soname=linux-gate.so.1
 
 # This makes sure the $(obj) subdirectory exists even though vdso32/
 # is not a kbuild sub-make subdirectory.
@@ -181,7 +184,8 @@ quiet_cmd_vdso = VDSO    $@
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
-VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \
+		$(LTO_CFLAGS)
 GCOV_PROFILE := n
 
 #

drivers/firmware/dcdbas.c

@@ -584,7 +584,7 @@ static struct platform_driver dcdbas_driver = {
 	.remove		= dcdbas_remove,
 };
 
-static const struct platform_device_info dcdbas_dev_info __initdata = {
+static const struct platform_device_info dcdbas_dev_info __initconst = {
 	.name		= DRIVER_NAME,
 	.id		= -1,
 	.dma_mask	= DMA_BIT_MASK(32),

drivers/pnp/pnpbios/bioscalls.c

@@ -21,7 +21,7 @@
 
 #include "pnpbios.h"
 
-static struct {
+__visible struct {
 	u16 offset;
 	u16 segment;
 } pnp_bios_callpoint;
@@ -41,6 +41,7 @@ asmlinkage void pnp_bios_callfunc(void);
 
 __asm__(".text			\n"
 	__ALIGN_STR "\n"
+	".globl pnp_bios_callfunc\n"
 	"pnp_bios_callfunc:\n"
 	"	pushl %edx	\n"
 	"	pushl %ecx	\n"
@@ -66,9 +67,9 @@ static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
  * after PnP BIOS oopses.
  */
 
-u32 pnp_bios_fault_esp;
-u32 pnp_bios_fault_eip;
-u32 pnp_bios_is_utter_crap = 0;
+__visible u32 pnp_bios_fault_esp;
+__visible u32 pnp_bios_fault_eip;
+__visible u32 pnp_bios_is_utter_crap = 0;
 
 static spinlock_t pnp_bios_lock;
 

include/linux/init.h

@@ -163,6 +163,23 @@ extern bool initcall_debug;
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_LTO
+/* Work around a LTO gcc problem: when there is no reference to a variable
+ * in a module it will be moved to the end of the program. This causes
+ * reordering of initcalls which the kernel does not like.
+ * Add a dummy reference function to avoid this. The function is
+ * deleted by the linker.
+ */
+#define LTO_REFERENCE_INITCALL(x) \
+	; /* yes this is needed */			\
+	static __used __exit void *reference_##x(void)	\
+	{						\
+		return &x;				\
+	}
+#else
+#define LTO_REFERENCE_INITCALL(x)
+#endif
+
 /* initcalls are now grouped by functionality into separate 
  * subsections. Ordering inside the subsections is determined
  * by link order. 
@@ -175,7 +192,8 @@ extern bool initcall_debug;
 
 #define __define_initcall(fn, id) \
 	static initcall_t __initcall_##fn##id __used \
-	__attribute__((__section__(".initcall" #id ".init"))) = fn
+	__attribute__((__section__(".initcall" #id ".init"))) = fn; \
+	LTO_REFERENCE_INITCALL(__initcall_##fn##id)
 
 /*
  * Early initcalls run before initializing SMP.

include/linux/io.h

@@ -24,7 +24,7 @@
 
 struct device;
 
-void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
+__visible void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
 void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
 
 #ifdef CONFIG_MMU

include/linux/linkage.h

@@ -12,9 +12,9 @@
 #endif
 
 #ifdef __cplusplus
-#define CPP_ASMLINKAGE extern "C"
+#define CPP_ASMLINKAGE extern "C" __visible
 #else
-#define CPP_ASMLINKAGE
+#define CPP_ASMLINKAGE __visible
 #endif
 
 #ifndef asmlinkage

include/linux/lockdep.h

@@ -265,7 +265,7 @@ extern void lockdep_info(void);
 extern void lockdep_reset(void);
 extern void lockdep_reset_lock(struct lockdep_map *lock);
 extern void lockdep_free_key_range(void *start, unsigned long size);
-extern void lockdep_sys_exit(void);
+extern asmlinkage void lockdep_sys_exit(void);
 
 extern void lockdep_off(void);
 extern void lockdep_on(void);

kernel/Makefile

@@ -18,6 +18,9 @@ CFLAGS_REMOVE_cgroup-debug.o = -pg
 CFLAGS_REMOVE_irq_work.o = -pg
 endif
 
+# cond_syscall is currently not LTO compatible
+CFLAGS_sys_ni.o = $(DISABLE_LTO)
+
 obj-y += sched/
 obj-y += locking/
 obj-y += power/

kernel/extable.c

@@ -36,7 +36,7 @@ extern struct exception_table_entry __start___ex_table[];
 extern struct exception_table_entry __stop___ex_table[];
 
 /* Cleared by build time tools if the table is already sorted. */
-u32 __initdata main_extable_sort_needed = 1;
+u32 __initdata __visible main_extable_sort_needed = 1;
 
 /* Sort the kernel's built-in exception table */
 void __init sort_main_extable(void)

kernel/locking/lockdep.c

@@ -2557,7 +2557,7 @@ static void __trace_hardirqs_on_caller(unsigned long ip)
 	debug_atomic_inc(hardirqs_on_events);
 }
 
-void trace_hardirqs_on_caller(unsigned long ip)
+__visible void trace_hardirqs_on_caller(unsigned long ip)
 {
 	time_hardirqs_on(CALLER_ADDR0, ip);
 
@@ -2610,7 +2610,7 @@ EXPORT_SYMBOL(trace_hardirqs_on);
 /*
  * Hardirqs were disabled:
  */
-void trace_hardirqs_off_caller(unsigned long ip)
+__visible void trace_hardirqs_off_caller(unsigned long ip)
 {
 	struct task_struct *curr = current;
 
@@ -4188,7 +4188,7 @@ void debug_show_held_locks(struct task_struct *task)
 }
 EXPORT_SYMBOL_GPL(debug_show_held_locks);
 
-void lockdep_sys_exit(void)
+asmlinkage void lockdep_sys_exit(void)
 {
 	struct task_struct *curr = current;
 

kernel/locking/mutex.c

@@ -75,8 +75,7 @@ EXPORT_SYMBOL(__mutex_init);
  * We also put the fastpath first in the kernel image, to make sure the
  * branch is predicted by the CPU as default-untaken.
  */
-static __used noinline void __sched
-__mutex_lock_slowpath(atomic_t *lock_count);
+__visible void __sched __mutex_lock_slowpath(atomic_t *lock_count);
 
 /**
  * mutex_lock - acquire the mutex
@@ -189,7 +188,8 @@ static inline int mutex_can_spin_on_owner(struct mutex *lock)
 }
 #endif
 
-static __used noinline void __sched __mutex_unlock_slowpath(atomic_t *lock_count);
+__visible __used noinline
+void __sched __mutex_unlock_slowpath(atomic_t *lock_count);
 
 /**
  * mutex_unlock - release the mutex
@@ -716,7 +716,7 @@ __mutex_unlock_common_slowpath(atomic_t *lock_count, int nested)
 /*
  * Release the lock, slowpath:
  */
-static __used noinline void
+__visible void
 __mutex_unlock_slowpath(atomic_t *lock_count)
 {
 	__mutex_unlock_common_slowpath(lock_count, 1);
@@ -773,7 +773,7 @@ int __sched mutex_lock_killable(struct mutex *lock)
 }
 EXPORT_SYMBOL(mutex_lock_killable);
 
-static __used noinline void __sched
+__visible void __sched
 __mutex_lock_slowpath(atomic_t *lock_count)
 {
 	struct mutex *lock = container_of(lock_count, struct mutex, count);

kernel/locking/rwsem-xadd.c

@@ -143,6 +143,7 @@ __rwsem_do_wake(struct rw_semaphore *sem, enum rwsem_wake_type wake_type)
 /*
  * wait for the read lock to be granted
  */
+__visible
 struct rw_semaphore __sched *rwsem_down_read_failed(struct rw_semaphore *sem)
 {
 	long count, adjustment = -RWSEM_ACTIVE_READ_BIAS;
@@ -190,6 +191,7 @@ struct rw_semaphore __sched *rwsem_down_read_failed(struct rw_semaphore *sem)
 /*
  * wait until we successfully acquire the write lock
  */
+__visible
 struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
 {
 	long count, adjustment = -RWSEM_ACTIVE_WRITE_BIAS;
@@ -252,6 +254,7 @@ struct rw_semaphore __sched *rwsem_down_write_failed(struct rw_semaphore *sem)
  * handle waking up a waiter on the semaphore
  * - up_read/up_write has decremented the active part of count if we come here
  */
+__visible
 struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem)
 {
 	unsigned long flags;
@@ -272,6 +275,7 @@ struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem)
  * - caller incremented waiting part of count and discovered it still negative
  * - just wake up any readers at the front of the queue
  */
+__visible
 struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem)
 {
 	unsigned long flags;

kernel/module.c

@@ -1948,6 +1948,10 @@ static int simplify_symbols(struct module *mod, const struct load_info *info)
 
 		switch (sym[i].st_shndx) {
 		case SHN_COMMON:
+			/* Ignore common symbols */
+			if (!strncmp(name, "__gnu_lto", 9))
+				break;
+
 			/* We compiled with -fno-common.  These are not
 			   supposed to happen.  */
 			pr_debug("Common symbol: %s\n", name);

kernel/panic.c

@@ -459,7 +459,7 @@ EXPORT_SYMBOL(warn_slowpath_null);
  * Called when gcc's -fstack-protector feature is used, and
  * gcc detects corruption of the on-stack canary value
  */
-void __stack_chk_fail(void)
+__visible void __stack_chk_fail(void)
 {
 	panic("stack-protector: Kernel stack is corrupted in: %p\n",
 		__builtin_return_address(0));

kernel/timer.c

@@ -52,7 +52,7 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/timer.h>
 
-u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
+__visible u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
 
 EXPORT_SYMBOL(jiffies_64);
 

kernel/trace/trace_irqsoff.c

@@ -498,14 +498,14 @@ void trace_hardirqs_off(void)
 }
 EXPORT_SYMBOL(trace_hardirqs_off);
 
-void trace_hardirqs_on_caller(unsigned long caller_addr)
+__visible void trace_hardirqs_on_caller(unsigned long caller_addr)
 {
 	if (!preempt_trace() && irq_trace())
 		stop_critical_timing(CALLER_ADDR0, caller_addr);
 }
 EXPORT_SYMBOL(trace_hardirqs_on_caller);
 
-void trace_hardirqs_off_caller(unsigned long caller_addr)
+__visible void trace_hardirqs_off_caller(unsigned long caller_addr)
 {
 	if (!preempt_trace() && irq_trace())
 		start_critical_timing(CALLER_ADDR0, caller_addr);

lib/string.c

@@ -648,7 +648,7 @@ EXPORT_SYMBOL(memmove);
  * @count: The size of the area.
  */
 #undef memcmp
-int memcmp(const void *cs, const void *ct, size_t count)
+__visible int memcmp(const void *cs, const void *ct, size_t count)
 {
 	const unsigned char *su1, *su2;
 	int res = 0;

scripts/Kbuild.include

@@ -155,6 +155,15 @@ ld-option = $(call try-run,\
 # Important: no spaces around options
 ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2))
 
+# ld-version
+# Usage: $(call ld-version)
+# Note this is mainly for HJ Lu's 3 number binutil versions
+ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh)
+
+# ld-ifversion
+# Usage:  $(call ld-ifversion, -ge, 22252, y)
+ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3))
+
 ######
 
 ###

scripts/Makefile.build

@@ -198,7 +198,7 @@ $(multi-objs-y:.o=.s)   : modname = $(modname-multi)
 $(multi-objs-y:.o=.lst) : modname = $(modname-multi)
 
 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
-cmd_cc_s_c       = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
+cmd_cc_s_c       = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
 
 $(obj)/%.s: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_s_c)