Skip to content

Latest commit

 

History

History
69 lines (44 loc) · 3.62 KB

README.md

File metadata and controls

69 lines (44 loc) · 3.62 KB
Raw

Magisk-FRPC

Use Magisk mount module to run FRPC.

If your terminal device uses WEB service or other services need remote access, then this module will be your good choice.

使用 Magisk 挂载模块运行 FRPC。

若您的终端设备使用了WEB服务或其他服务需要远程访问，那么该模块将是您的不错的选择。

Usage

After the module is installed, please browse the frpc.ini file under the Android/frpc directory to read the relevant instructions and configuration files, and then restart the device. After the device is running, the FRPC daemon will run on your device.

模块安装完成后，请到 Android/frpc 目录下浏览 frpc.ini 文件阅读相关说明并配置文件，然后重启设备。设备运行后，会在你的设备运行FRPC守护程序。

About

Features

  • The module supports arm, arm64, amd64, x86 architecture. Automatically judge and apply the equipment instruction structure during installation.
  • Use the crond command in the Busybox program carried by the module to establish the timing task detection status.
  • After the FRPC configuration file is modified, it will automatically detect and reload the configuration file.
  • Magisk module page automatically displays module status information.
  • Check the integrity of the file to prevent the module from being damaged. (thanks to the inspiration provided by the Riru module).
  • It can be turned on or off in the Magisk module to control the start and end of the FRPC program.
  • The power of the device is less than 20% and the FRPC program is automatically terminated when it is not being charged. Please keep the device full of power!
  • Creating a screen file in the module directory means that the screen is detected, otherwise it will not be detected.
  • 模块支持arm、arm64、amd64、x86架构。安装时自动判断设备指令架构并应用。
  • 使用模块携带的Busybox程序中crond命令建立定时任务检测状态。
  • FRPC配置文件修改后会自动检测并重载配置文件。
  • Magisk模块页面自动显示模块状态信息。
  • 检验文件完整性，防止模块被破坏。（感谢Riru模块提供的灵感）。
  • 可在Magisk模块中开启或关闭来控制FRPC程序启动与结束。
  • 设备电量低于20%且未在充电自动终止FRPC程序，请保持设备电量充足！
  • 在模块目录创建 screen 文件则表示息屏检测，反之不检测

How to build？

The traditional direct zip package construction method is not feasible, so I wrote a build script, you can refer to the article: https://www.isisy.com/1276.html

传统的直接打zip包构建方式已不可行，为此写了一份构建脚本，可参考文章：https://www.isisy.com/1276.html

Uninstall && Clear

The module settings are only generated in the Magisk module directory (/data/adb/modules/Magisk-FRPC) and the Android/frpc directory (excluding frpc log custom other path settings). If the module uninstallation is not complete, please manually clear Android/ frpc directory and related files.

模块设置仅在 Magisk 模块目录（/data/adb/modules/Magisk-FRPC）和 Android/frpc 目录生成文件（不含 frpc 日志自定义其它路径设置），若模块卸载不完全，则请手动清除 Android/frpc 目录及相关文件。

FRPC程序的日志路径设置请勿设置到根目录中去，除非您有需要自定义日志路径，否则请保持默认日志设置或关闭日志生成。

Thanks