A Magisk module for running FRPC on Android devices.
If your terminal device uses WEB service or other services need remote access, then this module will be your good choice.
在 Android 设备上运行 FRPC 的一个 Magisk 模块。
若您的终端设备使用了 WEB 服务或其他服务需要远程访问，那么该模块将是您的不错的选择。
After the module is installed, please browse and edit the frpc.ini configuration file in the Android/frpc directory. Then restart the device, after the device is running, it will run the FRPC daemon on your device.
模块安装完成后，请到 Android/frpc 目录下浏览并编辑 frpc.ini 配置文件文件。然后重启设备，设备运行后，会在你的设备上运行 FRPC 守护程序。
- The module supports
arm,arm64,amd64,x86architecture. Automatically judge and apply the equipment instruction structure during installation. - Use the crond command in the Busybox program carried by the module to establish the timing task detection status.
- After the FRPC configuration file is modified, it will automatically detect and reload the configuration file.
- Magisk module page automatically displays module status information.
- Check the integrity of the file to prevent the module from being damaged. (thanks to the inspiration provided by the Riru module).
- It can be turned on or off in the Magisk module to control the start and end of the FRPC program.
- The power of the device is less than 20% and the FRPC program is automatically terminated when it is not being charged. Please keep the device full of power!
- Creating a
screenfile in the module directory means that the screen is detected, otherwise it will not be detected.
- 模块支持
arm、arm64、amd64、x86架构。安装时自动判断设备指令架构并应用。 - 使用模块携带的 Busybox 程序中 crond 命令建立定时任务检测状态。
- FRPC 配置文件修改后会自动检测并重载配置文件。
- Magisk 模块页面自动显示模块状态信息。
- 检验文件完整性，防止模块被破坏。（感谢 Riru 模块提供的灵感）。
- 可在 Magisk 模块中开启或关闭来控制 FRPC 程序启动与结束。
- 设备电量低于 20% 且未在充电自动终止 FRPC 程序，请保持设备电量充足！
- 在模块目录创建
screen文件则表示息屏检测，反之不检测。
The traditional direct zip package construction method is not feasible, so I wrote a build script, you can refer to the article: https://www.isisy.com/1276.html
传统的直接打 zip 包构建方式已不可行，为此写了一份构建脚本，可参考文章：https://www.isisy.com/1276.html
The module only releases the files required for additional work in the Android/frpc directory of the device (excluding other path settings for customizing frpc logs). If the uninstall.sh script is not executed when the module is uninstalled, please manually clear the files in the Android/frpc directory.
模块仅在设备 Android/frpc 目录释放额外工作需要的文件（不含 frpc 日志自定义其它路径设置），若模块卸载时未执行 uninstall.sh 脚本，请手动清除 Android/frpc 目录内文件。
FRPC 程序的日志路径设置请勿设置到根目录中去，除非您有需要自定义日志路径，否则请保持默认日志设置或关闭日志生成。