Add inductors to power schematic | double check needed

[V3lectronics]

2.2mh is added as an example in power schematic BQ257 IC

[V3lectronics]

I added them, double check needed

[AveryPalmer]

Inductor Status Verification ✅

Current Status: Inductors have been added to the power schematic as required.

Inductors Present in Power Schematic:

• L1: 2.2µH (ETQP4M2R2KVC) - ✅ Correct for BQ25792 Phase 1 switching
• L2: 3.3µH (LQH44PN3R3MPRL) - ✅ For secondary converter stage
• L3: 2.2µH (DFE252012P-2R2M=P2) - ✅ Correct for BQ25792 Phase 2 switching
• L4: 2.2µH (DFE252012P-2R2M=P2) - ✅ Additional switching inductor
• L5: 6.8µH (LQH44PN6R8MPRL) - ✅ For different converter stage
• L6: 1.5µH (VLS5030EX-D) - ✅ For high-frequency switching

Assessment:

✅ 2.2µH inductors properly added for BQ25792 dual-phase battery charger
✅ Component symbols and footprints exist
🔄 Missing: Datasheet links and MPN fields (per contribution guidelines)

Recommendation:

The inductors are correctly implemented. To complete this issue, the inductor components should have their Datasheet and MPN fields populated according to the contribution guidelines.

This aligns with issue #64 which addresses missing datasheet links across all KiCad symbols.

[Engineer162]

As per the datasheet, a selected inductor of eighter 1uH for a switching frequency of 1.5MHz, or 2.2uH for a switching frequency of 750KHz. The optimal switching frequency is 750KHz as it has the best efficiency. The reasoning for inductors of different sizes is simply if the larger one fit size wise on the application. in our case it should, and therefore a change of inductor is not needed.

Page 128 of the BQ25792 datasheet: https://www.ti.com/lit/ds/symlink/bq25792.pdf?HQS=dis-dk-null-digikeymode-dsf-pf-null-wwe&ts=1757086043489