This repository contains example of usec-133-generic-spi-lib library integration for Raspberry Pi boards. Please check usec-133-generic-spi-lib project repository for more info about library itself.
To get started, please make sure, that all libraries and tools for C/C++ development on Raspberry Pi are properly installed and configured.
| USEC module connector | Raspberry Pi |
|---|---|
| VBUS | 3.3V |
| GND | GND |
| SCLK | 11 |
| MISO | 9 |
| MOSI | 10 |
| CS | 8 |
| RDY | 24 |
| RST | 17 |
Note: you can easily reconfigure pinout by editting platform.h file
[1] Download and install bcm2835-1.75 library:
cd ~
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.75.tar.gz
tar zxvf bcm2835-1.75.tar.gz
cd bcm2835-1.75
./configure
make
sudo make check
sudo make install
[2] Clone usec-133-raspberry-pi-spi-example repository:
cd ~
git clone https://github.com/UnisystemDisplays/usec-133-raspberry-pi-spi-example.git
[3] Build and run demo application:
cd usec-133-raspberry-pi-spi-example
make
sudo ./usec-133-raspberry-pi-spi-example
Please contact Unisystem support - lukasz.skalski@unisystem.com or jacek.marcinkowski@unisystem.com
See LICENSE.txt file for details.