feat(qmi8658c): add driver for QMI8658C 6-axis IMU sensor

README.md

@@ -248,6 +248,7 @@ or [GitLab examples](https://gitlab.com/UncleRus/esp-idf-lib/tree/master/example
 | **hmc5883l**             | Driver for 3-axis digital compass HMC5883L and HMC5983L                          | BSD-3-Clause | esp32, esp8266, esp32s2, esp32c3, esp32s3, esp32c2, esp32c6, esp32h2, esp32p4, esp32c5, esp32c61 | yes           |
 | **lsm303**               | Driver for LSM303 3-axis accelerometer and magnetometer sensor                   | BSD-3-Clause | esp32, esp8266, esp32s2, esp32c3, esp32s3, esp32c2, esp32c6, esp32h2, esp32p4, esp32c5, esp32c61 | yes           |
 | **qmc5883l**             | Driver for QMC5883L 3-axis magnetic sensor                                       | BSD-3-Clause | esp32, esp8266, esp32s2, esp32c3, esp32s3, esp32c2, esp32c6, esp32h2, esp32p4, esp32c5, esp32c61 | yes           |
+| **qmi8658c**             | Driver for QMI8658C 6-axis IMU sensor                                            | BSD-3-Clause | esp32, esp32c3, esp8266, esp32s2, esp32c3, esp32c6 | yes           |
 
 
 
@@ -411,6 +412,8 @@ or [GitLab examples](https://gitlab.com/UncleRus/esp-idf-lib/tree/master/example
 
 - [Weslley Duarte](https://github.com/weslleymfd): `ads130e08` 
 
+- [xyzroe](https://github.com/xyzroe): `qmi8658c` 
+
 - [Zaltora](https://github.com/Zaltora): `ina3221` 
 
 - zeroday: `onewire` 

components/qmi8658c/.eil.yml

@@ -0,0 +1,21 @@
+name: qmi8658c
+description: Driver for QMI8658C 6-axis IMU sensor
+version: 0.5.0
+groups:
+  - magnetic
+code_owners: xyzroe
+depends:
+  - i2cdev
+  - log
+  - esp_idf_lib_helpers
+thread_safe: yes
+targets:
+  - esp32
+  - esp32c3
+  - esp8266
+  - esp32s2
+  - esp32c6
+license: BSD-3
+copyrights:
+  - name: xyzroe
+    year: 2024

components/qmi8658c/CMakeLists.txt

@@ -0,0 +1,5 @@
+idf_component_register(
+    SRCS qmi8658c.c
+    INCLUDE_DIRS .
+    REQUIRES i2cdev log esp_idf_lib_helpers
+)

components/qmi8658c/LICENSE

@@ -0,0 +1,26 @@
+Copyright (c) 2024 xyzroe <i@xyzroe.cc>
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+   may be used to endorse or promote products derived from this software without
+   specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

components/qmi8658c/component.mk

@@ -0,0 +1,2 @@
+COMPONENT_ADD_INCLUDEDIRS = .
+COMPONENT_DEPENDS = i2cdev log esp_idf_lib_helpers

components/qmi8658c/qmi8658c.c

@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2024 xyzroe <i@xyzroe.cc>
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 
+ * 3. Neither the name of the copyright holder nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */ 
+
+/**
+ * @file qmi8658c.c
+ * @brief QMI8658C sensor driver
+ * @author xyzroe
+ * ESP-IDF driver for QMI8658C sensor
+ *
+ * Datasheet: https://qstcorp.com/upload/pdf/202202/QMI8658C%20datasheet%20rev%200.9.pdf
+ *
+ * Copyright (c) 2024 xyzroe <i@xyzroe.cc>
+ */
+
+#include <stdio.h>
+#include <freertos/FreeRTOS.h>
+#include <freertos/task.h>
+#include <esp_log.h>
+#include <esp_idf_lib_helpers.h>
+#include "qmi8658c.h"
+
+static const char *TAG = "qmi8658c";
+
+#define CHECK(x)                                                                                                                                                                                       \
+    do                                                                                                                                                                                                 \
+    {                                                                                                                                                                                                  \
+        esp_err_t __;                                                                                                                                                                                  \
+        if ((__ = x) != ESP_OK)                                                                                                                                                                        \
+            return __;                                                                                                                                                                                 \
+    }                                                                                                                                                                                                  \
+    while (0)
+#define CHECK_ARG(VAL)                                                                                                                                                                                 \
+    do                                                                                                                                                                                                 \
+    {                                                                                                                                                                                                  \
+        if (!(VAL))                                                                                                                                                                                    \
+            return ESP_ERR_INVALID_ARG;                                                                                                                                                                \
+    }                                                                                                                                                                                                  \
+    while (0)
+
+static qmi_ctx_t qmi_ctx;
+
+inline static esp_err_t send_command_nolock(i2c_dev_t *dev, uint8_t reg, uint8_t value)
+{
+    uint8_t data[2] = { reg, value };
+    return i2c_dev_write(dev, NULL, 0, data, 2);
+}
+
+static esp_err_t send_command(i2c_dev_t *dev, uint8_t reg, uint8_t value)
+{
+    I2C_DEV_TAKE_MUTEX(dev);
+    I2C_DEV_CHECK(dev, send_command_nolock(dev, reg, value));
+    I2C_DEV_GIVE_MUTEX(dev);
+
+    return ESP_OK;
+}
+
+#define REPLY_DELAY_MS 25
+
+static esp_err_t read_register(i2c_dev_t *dev, uint8_t reg, uint8_t *value)
+{
+    I2C_DEV_TAKE_MUTEX(dev);
+
+    I2C_DEV_CHECK(dev, i2c_dev_read_reg(dev, reg, value, 1));
+
+    vTaskDelay(pdMS_TO_TICKS(REPLY_DELAY_MS));
+
+    I2C_DEV_GIVE_MUTEX(dev);
+
+    return ESP_OK;
+}
+
+esp_err_t qmi8658c_init_desc(i2c_dev_t *dev, uint8_t addr, i2c_port_t port, gpio_num_t sda_gpio, gpio_num_t scl_gpio)
+{
+    CHECK_ARG(dev);
+
+    dev->port = port;
+    dev->addr = addr;
+    dev->cfg.sda_io_num = sda_gpio;
+    dev->cfg.scl_io_num = scl_gpio;
+#if HELPER_TARGET_IS_ESP32
+    dev->cfg.master.clk_speed = QMI8658C_I2C_FREQ_HZ;
+#endif
+    return i2c_dev_create_mutex(dev);
+}
+
+esp_err_t qmi8658c_free_desc(i2c_dev_t *dev)
+{
+    CHECK_ARG(dev);
+    return i2c_dev_delete_mutex(dev);
+    /*
+        uint8_t ctrl7, ctrl1;
+
+        // Read QMI8658_CTRL7 register
+        CHECK(read_register(dev, QMI8658_CTRL7, &ctrl7));
+
+        // Disable accelerometer, gyroscope, magnetometer and attitude engine
+        ctrl7 &= 0xF0;
+        CHECK(send_command(dev, QMI8658_CTRL7, ctrl7));
+
+        // Disable sensor by turning off the internal 2 MHz oscillator
+        CHECK(read_register(dev, QMI8658_CTRL1, &ctrl1));
+        ctrl1 |= (1 << 0);
+        CHECK(send_command(dev, QMI8658_CTRL1, ctrl1));
+
+        // Read these two registers again to verify
+        CHECK(read_register(dev, QMI8658_CTRL7, &ctrl7));
+        CHECK(read_register(dev, QMI8658_CTRL1, &ctrl1));
+
+        // Verify if the sensor is properly disabled
+        if (!(ctrl7 & 0x0F) && (ctrl1 & 0x01))
+        {
+            return i2c_dev_delete_mutex(dev);
+        }
+        else
+        {
+            return ESP_FAIL;
+        }
+        */
+}
+
+esp_err_t qmi8658c_reset(i2c_dev_t *dev)
+{
+    CHECK_ARG(dev);
+
+    return send_command(dev, QMI8658_RESET, 0xB0);
+}
+
+/* Accelerometer sensitivity table */
+uint16_t acc_scale_sensitivity_table[4] = {
+    ACC_SCALE_SENSITIVITY_2G, // Sensitivity for ±2g range.
+    ACC_SCALE_SENSITIVITY_4G, // Sensitivity for ±4g range.
+    ACC_SCALE_SENSITIVITY_8G, // Sensitivity for ±8g range.
+    ACC_SCALE_SENSITIVITY_16G // Sensitivity for ±16g range.
+};
+
+/* Gyroscope sensitivity table */
+uint16_t gyro_scale_sensitivity_table[8] = {
+    GYRO_SCALE_SENSITIVITY_16DPS,   // Sensitivity for ±16 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_32DPS,   // Sensitivity for ±32 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_64DPS,   // Sensitivity for ±64 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_128DPS,  // Sensitivity for ±128 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_256DPS,  // Sensitivity for ±256 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_512DPS,  // Sensitivity for ±512 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_1024DPS, // Sensitivity for ±1024 degrees per second range.
+    GYRO_SCALE_SENSITIVITY_2048DPS  // Sensitivity for ±2048 degrees per second range.
+};
+
+esp_err_t qmi8658c_setup(i2c_dev_t *dev, qmi8658c_config_t *config)
+{
+    CHECK_ARG(dev && config);
+
+    // reset device
+    qmi8658c_reset(dev);
+
+    // set mode
+    uint8_t ctrl7;
+    CHECK(read_register(dev, QMI8658_CTRL7, &ctrl7));
+    ctrl7 = (ctrl7 & 0xFC) | config->mode;
+    CHECK(send_command(dev, QMI8658_CTRL7, ctrl7));
+
+    // set accelerometr scale and ODR
+    uint8_t ctrl2;
+    CHECK(read_register(dev, QMI8658_CTRL2, &ctrl2));
+    ctrl2 = (ctrl2 & 0xF0) | config->acc_odr;
+    ctrl2 = (ctrl2 & 0x8F) | (config->acc_scale << 4);
+    CHECK(send_command(dev, QMI8658_CTRL2, ctrl2));
+
+    // set accelerometer scale and sensitivity
+    qmi_ctx.acc_scale = config->acc_scale;
+    qmi_ctx.acc_sensitivity = acc_scale_sensitivity_table[config->acc_scale];
+
+    // set gyroscope scale and ODR
+    uint8_t ctrl3;
+    CHECK(read_register(dev, QMI8658_CTRL3, &ctrl3));
+    ctrl3 = (ctrl3 & 0xF0) | config->gyro_odr;
+    ctrl3 = (ctrl3 & 0x8F) | (config->gyro_scale << 4);
+    CHECK(send_command(dev, QMI8658_CTRL3, ctrl3));
+
+    // set gyroscope scale and sensitivity
+    qmi_ctx.gyro_scale = config->gyro_scale;
+    qmi_ctx.gyro_sensitivity = gyro_scale_sensitivity_table[config->gyro_scale];
+
+    // read device ID and revision ID
+    CHECK(read_register(dev, QMI8658_WHO_AM_I, &qmi_ctx.who_am_i));
+    CHECK(read_register(dev, QMI8658_REVISION, &qmi_ctx.revision));
+
+    ESP_LOGW(TAG, "device ID: 0x%02X, revision: 0x%02X", qmi_ctx.who_am_i, qmi_ctx.revision);
+
+    // Verify mode setting
+    uint8_t qmi8658_ctrl7;
+    CHECK(read_register(dev, QMI8658_CTRL7, &qmi8658_ctrl7));
+    if ((qmi8658_ctrl7 & 0x03) != config->mode)
+    {
+        ESP_LOGE(TAG, "Mode setting verification failed");
+        return ESP_FAIL;
+    }
+
+    return ESP_OK;
+}
+
+esp_err_t qmi8658c_read_data(i2c_dev_t *dev, qmi8658c_data_t *data)
+{
+    CHECK_ARG(dev && data);
+
+    // Read accelerometer data
+    uint8_t acc_x_l, acc_x_h, acc_y_l, acc_y_h, acc_z_l, acc_z_h;
+    CHECK(read_register(dev, QMI8658_ACC_X_L, &acc_x_l));
+    CHECK(read_register(dev, QMI8658_ACC_X_H, &acc_x_h));
+    CHECK(read_register(dev, QMI8658_ACC_Y_L, &acc_y_l));
+    CHECK(read_register(dev, QMI8658_ACC_Y_H, &acc_y_h));
+    CHECK(read_register(dev, QMI8658_ACC_Z_L, &acc_z_l));
+    CHECK(read_register(dev, QMI8658_ACC_Z_H, &acc_z_h));
+
+    // ESP_LOGE(TAG, "acc_x_l: %d, acc_x_h: %d, acc_y_l: %d, acc_y_h: %d, acc_z_l: %d, acc_z_h: %d", acc_x_l, acc_x_h, acc_y_l, acc_y_h, acc_z_l, acc_z_h);
+
+    int16_t acc_x = (int16_t)((acc_x_h << 8) | acc_x_l);
+    int16_t acc_y = (int16_t)((acc_y_h << 8) | acc_y_l);
+    int16_t acc_z = (int16_t)((acc_z_h << 8) | acc_z_l);
+
+    // ESP_LOGW(TAG, "acc_x: %d, acc_y: %d, acc_z: %d", acc_x, acc_y, acc_z);
+
+    data->acc.x = (float)acc_x / qmi_ctx.acc_sensitivity;
+    data->acc.y = (float)acc_y / qmi_ctx.acc_sensitivity;
+    data->acc.z = (float)acc_z / qmi_ctx.acc_sensitivity;
+
+    // Read gyroscope data
+    uint8_t gyr_x_l, gyr_x_h, gyr_y_l, gyr_y_h, gyr_z_l, gyr_z_h;
+    CHECK(read_register(dev, QMI8658_GYR_X_L, &gyr_x_l));
+    CHECK(read_register(dev, QMI8658_GYR_X_H, &gyr_x_h));
+    CHECK(read_register(dev, QMI8658_GYR_Y_L, &gyr_y_l));
+    CHECK(read_register(dev, QMI8658_GYR_Y_H, &gyr_y_h));
+    CHECK(read_register(dev, QMI8658_GYR_Z_L, &gyr_z_l));
+    CHECK(read_register(dev, QMI8658_GYR_Z_H, &gyr_z_h));
+
+    // ESP_LOGE(TAG, "gyr_x_l: %d, gyr_x_h: %d, gyr_y_l: %d, gyr_y_h: %d, gyr_z_l: %d, gyr_z_h: %d", gyr_x_l, gyr_x_h, gyr_y_l, gyr_y_h, gyr_z_l, gyr_z_h);
+
+    int16_t gyr_x = (int16_t)((gyr_x_h << 8) | gyr_x_l);
+    int16_t gyr_y = (int16_t)((gyr_y_h << 8) | gyr_y_l);
+    int16_t gyr_z = (int16_t)((gyr_z_h << 8) | gyr_z_l);
+
+    // ESP_LOGW(TAG, "gyr_x: %d, gyr_y: %d, gyr_z: %d", gyr_x, gyr_y, gyr_z);
+
+    data->gyro.x = (float)gyr_x / qmi_ctx.gyro_sensitivity;
+    data->gyro.y = (float)gyr_y / qmi_ctx.gyro_sensitivity;
+    data->gyro.z = (float)gyr_z / qmi_ctx.gyro_sensitivity;
+
+    // Read temperature data
+    uint8_t temp_l, temp_h;
+    CHECK(read_register(dev, QMI8658_TEMP_L, &temp_l));
+    CHECK(read_register(dev, QMI8658_TEMP_H, &temp_h));
+
+    // ESP_LOGE(TAG, "temp_l: %d, temp_h: %d", temp_l, temp_h);
+
+    int16_t temp = (int16_t)((temp_h << 8) | temp_l);
+    // ESP_LOGW(TAG, "temp: %d", temp);
+
+    data->temperature = (float)temp / TEMPERATURE_SENSOR_RESOLUTION;
+
+    // ESP_LOGW(TAG, "Acc: x=%f, y=%f, z=%f; Gyro: x=%f, y=%f, z=%f; Temp: %f",
+    //          data->acc.x, data->acc.y, data->acc.z, data->gyro.x, data->gyro.y, data->gyro.z, data->temperature);
+
+    return ESP_OK;
+}