[beta] Metamask-satochip (SatoMask) v10.14.8 with WalletConnect support

[Beta] Metamask-Satochip v10.14.8: add WalletConnect support

Metamask fork with support for hardware wallets through WalletConnect and Satochip-Keyring. It requires a Satochip smartcard loaded with the Satochip javacard applet v0.10 (or later). This release is based on the release 10.14.7 of the original Metamask client (commit 9705531 from 2022-06-07), with the modifications required to support WalletConnect and Satochip-Keyring. The extension uses Satochip-Keyring v0.3.0 with EIP712 & EIP1559 support. If 2FA is enabled, the 2FA app should be installed on an android device.

To communicate with the Satochip, Satochip-Bridge with WalletConnect support must be running on the same computer. Always use the latest release of Metamask-Satochip with the latest release of Satochip-Bridge to ensure compatibility. At least Satochip-Bridge v0.5.3 should be used for full compatibility.

Follow the instruction provided in the readme file to build the extension. The extension is available as a folder in the dist folder.
A zipped folder is also available below. To load the extension in Chrome, go to menu=>more tools=>extension and click on the 'load extension' button. Developer mode must be enabled load the extension from folder. (If the extension folder is zipped, you can unzip it first or drop the zip file in the Chrome extension page at chrome://extensions/).

Support is happily provided on our telegram channel.

The Metamask-Satochip wallet is currently in Beta, so use with caution! In this phase, it is recommended to use the software on the Ropsten network. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

[deprecated] Metamask-satochip v10.14.7 with WalletConnect support

Metamask-Satochip v10.14.7: add WalletConnect support
Warning: this beta-release is deprecated and should not be used!

Metamask fork with support for hardware wallets through WalletConnect and Satochip-Keyring. It requires a Satochip smartcard loaded with the Satochip javacard applet v0.10 (or later). This release is based on the release 10.14.7 of the original Metamask client (commit 9705531 from 2022-06-07), with the modifications required to support WalletConnect and Satochip-Keyring. The extension uses Satochip-Keyring v0.3.0 with EIP712 & EIP1559 support. If 2FA is enabled, the 2FA app should be installed on an android device.

To communicate with the Satochip, Satochip-Bridge with WalletConnect support must be running on the same computer. Always use the latest release of Metamask-Satochip with the latest release of Satochip-Bridge to ensure compatibility. At least Satochip-Bridge v0.5.0 should be used for full compatibility.

Follow the instruction provided in the readme file to build the extension. The extension is available as a folder in the dist folder.
A zipped folder is also available below. To load the extension in Chrome, go to menu=>more tools=>extension and click on the 'load extension' button. Developer mode must be enabled load the extension from folder. (If the extension folder is zipped, you must unzip it first).

Support is happily provided on our telegram channel.

The Metamask-Satochip wallet is currently in Beta, so use with caution! In this phase, it is recommended to use the software on the Ropsten network. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

[Deprecated] Metamask-satochip v10.13.0 with WalletConnect support

This beta release is deprecated - do not use!
Metamask-Satochip v10.13.0: add WalletConnect support

Metamask fork with support for hardware wallets through WalletConnect. It requires a Satochip smartcard loaded with the Satochip javacard applet v0.10 (or later). This release is based on the release 10.13.0 of the original Metamask client (commit 34d43e6 from 2022-04-22), with the modifications required to support WalletConnect. If 2FA is enabled, the 2FA app should be installed on an android device.

To communicate with the Satochip, Satochip-Bridge with WalletConnect support must be running on the same computer. Always use the latest release of Metamask-Satochip with the latest release of Satochip-Bridge to ensure compatibility.

Follow the instruction provided in the readme file to build the extension. The extension is available as a folder in the dist folder.
A zipped folder is also available below. To load the extension in Chrome, go to menu=>more tools=>extension and click on the 'load extension' button. Developer mode must be enabled load the extension from folder. (If the extension folder is zipped, you must unzip it first).

Support is happily provided on our telegram channel.

The Metamask-Satochip wallet is currently in Beta, so use with caution! In this phase, it is recommended to use the software on the testnet only. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Metamask-satochip v9.5.4

Metamask-Satochip v9.5.4: (better) support for Satochip-2FA.

Metamask fork with support for the Satochip hardware wallet. It requires a Satochip smartcard loaded with the Satochip javacard applet v0.10 (or later). This release is based on the release 9.5.3 of the original Metamask client (commit 978f11b from 2021-05-20), with the modifications required to support Satochip. If 2FA is enabled, the 2FA app should be installed on an android device.

To communicate with the Satochip, Satochip-Bridge must be running on the same computer. Always use the latest release of Metamask-Satochip with the latest release of Satochip-Bridge to ensure compatibility.

Follow the instruction provided in the readme file to build the extension. The extension is available as a folder in the dist folder.
A zipped folder is also available below. To load the extension in Chrome, go to menu=>more tools=>extension and click on the 'load extension' button. Developer mode must be enabled load the extension from folder. (If the extension folder is zipped, you must unzip it first).

Support is happily provided on our telegram channel.

The Metamask-Satochip wallet is currently in Beta, so use with caution! In this phase, it is recommended to use the software on the testnet only. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Metamask-satochip v9.5.3

Metamask fork with support for the Satochip hardware wallet. It requires a Satochip smartcard loaded with the Satochip javacard applet v0.10 (or later). This release is based on the release 9.5.3 of the original Metamask client (commit 978f11b from 2021-05-20), with the modifications required to support Satochip. If 2FA is enabled, the 2FA app should be installed on an android device.

To communicate with the Satochip, Satochip-Bridge must be running on the same computer. Always use the latest release of Metamask-Satochip with the latest release of Satochip-Bridge to ensure compatibility.

Follow the instruction provided in the readme file to build the extension. The extension is available as a folder in the dist folder.
A zipped folder is also available below. To load the extension in Chrome, go to menu=>more tools=>extension and click on the 'load extension' button. Developer mode must be enabled load the extension from folder. (If the extension folder is zipped, you must unzip it first).

Support is happily provided on our telegram channel.

The Metamask-Satochip wallet is currently in Beta, so use with caution! In this phase, it is recommended to use the software on the testnet only. This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.