Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc and other tiny driver subsystem
  updates for 5.16-rc1.

  Loads of things in here, all of which have been in linux-next for a
  while with no reported problems (except for one called out below.)

  Included are:

   - habanana labs driver updates, including dma_buf usage, reviewed and
     acked by the dma_buf maintainers

   - iio driver update (going through this tree not staging as they
     really do not belong going through that tree anymore)

   - counter driver updates

   - hwmon driver updates that the counter drivers needed, acked by the
     hwmon maintainer

   - xillybus driver updates

   - binder driver updates

   - extcon driver updates

   - dma_buf module namespaces added (will cause a build error in arm64
     for allmodconfig, but that change is on its way through the drm
     tree)

   - lkdtm driver updates

   - pvpanic driver updates

   - phy driver updates

   - virt acrn and nitr_enclaves driver updates

   - smaller char and misc driver updates"

* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
  comedi: dt9812: fix DMA buffers on stack
  comedi: ni_usb6501: fix NULL-deref in command paths
  arm64: errata: Enable TRBE workaround for write to out-of-range address
  arm64: errata: Enable workaround for TRBE overwrite in FILL mode
  coresight: trbe: Work around write to out of range
  coresight: trbe: Make sure we have enough space
  coresight: trbe: Add a helper to determine the minimum buffer size
  coresight: trbe: Workaround TRBE errata overwrite in FILL mode
  coresight: trbe: Add infrastructure for Errata handling
  coresight: trbe: Allow driver to choose a different alignment
  coresight: trbe: Decouple buffer base from the hardware base
  coresight: trbe: Add a helper to pad a given buffer area
  coresight: trbe: Add a helper to calculate the trace generated
  coresight: trbe: Defer the probe on offline CPUs
  coresight: trbe: Fix incorrect access of the sink specific data
  coresight: etm4x: Add ETM PID for Kryo-5XX
  coresight: trbe: Prohibit trace before disabling TRBE
  coresight: trbe: End the AUX handle on truncation
  coresight: trbe: Do not truncate buffer on IRQ
  coresight: trbe: Fix handling of spurious interrupts
  ...

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -226,6 +226,12 @@ Description:    Gets the state dump occurring on a CS timeout or failure.
                 Writing an integer X discards X state dumps, so that the
                 next read would return X+1-st newest state dump.
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
+Date:           Sep 2021
+KernelVersion:  5.16
+Contact:        obitton@habana.ai
+Description:    Sets the command submission timeout value in seconds.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
 Date:           Mar 2020
 KernelVersion:  5.6

Documentation/ABI/testing/sysfs-bus-counter

@@ -203,6 +203,27 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
+What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
+What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
+What:		/sys/bus/counter/devices/counterX/countY/direction_component_id
+What:		/sys/bus/counter/devices/counterX/countY/enable_component_id
+What:		/sys/bus/counter/devices/counterX/countY/error_noise_component_id
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
+What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+KernelVersion:	5.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the component ID of the
+		respective extension or Synapse.
+
 What:		/sys/bus/counter/devices/counterX/countY/spike_filter_ns
 KernelVersion:	5.14
 Contact:	linux-iio@vger.kernel.org
@@ -212,6 +233,14 @@ Description:
 		shorter or equal to configured value are ignored. Value 0 means
 		filter is disabled.
 
+What:		/sys/bus/counter/devices/counterX/events_queue_size
+KernelVersion:	5.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Size of the Counter events queue in number of struct
+		counter_event data structures. The number of elements will be
+		rounded-up to a power of 2.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -286,7 +315,14 @@ What:		/sys/bus/counter/devices/counterX/signalY/signal
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Signal data of Signal Y represented as a string.
+		Signal level state of Signal Y. The following signal level
+		states are available:
+
+		low:
+			Low level state.
+
+		high:
+			High level state.
 
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
 KernelVersion:	5.2

Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo

@@ -0,0 +1,10 @@
+What:		/sys/bus/fsi/devices/XX.XX.00:06/sbefifoX/timeout
+KernelVersion:	5.15
+Contact:	eajames@linux.ibm.com
+Description:
+		Indicates whether or not this SBE device has experienced a
+		timeout; i.e. the SBE did not respond within the time allotted
+		by the driver. A value of 1 indicates that a timeout has
+		ocurred and no transfers have completed since the timeout. A
+		value of 0 indicates that no timeout has ocurred, or if one
+		has, more recent transfers have completed successful.

Documentation/ABI/testing/sysfs-bus-iio

@@ -429,6 +429,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1957,3 +1958,44 @@ Description:
 		Specify the percent for light sensor relative to the channel
 		absolute value that a data field should change before an event
 		is generated. Units are a percentage of the prior reading.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_auto_enable
+Date:		June 2020
+KernelVersion:	5.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some sensors have the ability to apply auto calibration at
+		runtime. For example, it may be necessary to compensate for
+		contaminant build-up in a measurement chamber or optical
+		element deterioration that would otherwise lead to sensor drift.
+
+		Writing 1 or 0 to this attribute will respectively activate or
+		deactivate this auto calibration function.
+
+		Upon reading, the current status is returned.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_forced_value
+Date:		June 2020
+KernelVersion:	5.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some sensors have the ability to apply a manual calibration using
+		a known measurement value, perhaps obtained from an external
+		reference device.
+
+		Writing a value to this function will force such a calibration
+		change. For the scd30 the value should be from the range
+		[400 1 2000].
+
+		Note for the scd30 that a valid value may only be obtained once
+		it is has been written. Until then any read back of this value
+		should be ignored. As for the scd4x an error will be returned
+		immediately if the manual calibration has failed.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available
+KernelVersion:  5.15
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Available range for the forced calibration value, expressed as:
+
+		- a range specified as "[min step max]"

Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2

@@ -0,0 +1,38 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_calibration_factory
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Writing '1' triggers a 'Factory' calibration cycle.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_calibration_background
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Writing '1' triggers a 'Background' calibration cycle.
+
+What:		/sys/bus/iio/devices/iio:deviceX/error_status_available
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Reading returns the list of possible chip error status.
+		Available options are:
+		- 'error_fatal': Analog front-end initialization error
+		- 'error_i2c': Read/write to non-existing register
+		- 'error_algorithm': Corrupted parameters
+		- 'error_calibration': Calibration has failed
+		- 'error_self_diagnostic': Internal interface failure
+		- 'error_out_of_range': Measured concentration out of scale
+		- 'error_memory': Error during memory operations
+		- 'error_no_measurement': Cleared at first measurement
+		- 'error_low_voltage': Sensor regulated voltage too low
+		- 'error_measurement_timeout': Unable to complete measurement
+
+What:		/sys/bus/iio/devices/iio:deviceX/error_status
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Reading returns the current chip error status.

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865

@@ -0,0 +1,20 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn
+		off when the input voltage is negative or greater than VDD.
+
+		Reading returns '1' if input voltage is negative or greater
+		than VDD, otherwise '0'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Notch frequency in Hz for a noise rejection filter. Used i.e for
+		line noise rejection.
+
+		Valid notch filter values are 50 Hz and 60 Hz.

Documentation/ABI/testing/sysfs-bus-platform-devices-occ-hwmon

@@ -0,0 +1,13 @@
+What:		/sys/bus/platform/devices/occ-hwmon.X/ffdc
+KernelVersion:	5.15
+Contact:	eajames@linux.ibm.com
+Description:
+		Contains the First Failure Data Capture from the SBEFIFO
+		hardware, if there is any from a previous transfer. Otherwise,
+		the file is empty. The data is cleared when it's been
+		completely read by a user. As the name suggests, only the data
+		from the first error is saved, until it's cleared upon read. The OCC hwmon driver, running on
+		a Baseboard Management Controller (BMC), communicates with
+		POWER9 and up processors over the Self-Boot Engine (SBE) FIFO.
+		In many error conditions, the SBEFIFO will return error data
+		indicating the type of error and system state, etc.

Documentation/ABI/testing/sysfs-bus-soundwire-master

@@ -1,13 +1,13 @@
-What:		/sys/bus/soundwire/devices/sdw-master-N/revision
-		/sys/bus/soundwire/devices/sdw-master-N/clk_stop_modes
-		/sys/bus/soundwire/devices/sdw-master-N/clk_freq
-		/sys/bus/soundwire/devices/sdw-master-N/clk_gears
-		/sys/bus/soundwire/devices/sdw-master-N/default_col
-		/sys/bus/soundwire/devices/sdw-master-N/default_frame_rate
-		/sys/bus/soundwire/devices/sdw-master-N/default_row
-		/sys/bus/soundwire/devices/sdw-master-N/dynamic_shape
-		/sys/bus/soundwire/devices/sdw-master-N/err_threshold
-		/sys/bus/soundwire/devices/sdw-master-N/max_clk_freq
+What:		/sys/bus/soundwire/devices/sdw-master-<N>/revision
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_stop_modes
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_freq
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_gears
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_col
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_frame_rate
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_row
+		/sys/bus/soundwire/devices/sdw-master-<N>/dynamic_shape
+		/sys/bus/soundwire/devices/sdw-master-<N>/err_threshold
+		/sys/bus/soundwire/devices/sdw-master-<N>/max_clk_freq
 
 Date:		April 2020
 

Documentation/ABI/testing/sysfs-bus-soundwire-slave

@@ -64,37 +64,37 @@ Description:	SoundWire Slave Data Port-0 DisCo properties.
 		Data port 0 are used by the bus to configure the Data Port 0.
 
 
-What:		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/words
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/type
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_grouping
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/simple_ch_prep_sm
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_prep_timeout
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/imp_def_interrupts
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/channels
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_combinations
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_async_buffer
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/block_pack_mode
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/port_encoding
-
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/words
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/type
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_grouping
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/simple_ch_prep_sm
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_prep_timeout
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/imp_def_interrupts
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/channels
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_combinations
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_async_buffer
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/block_pack_mode
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/port_encoding
+What:		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/min_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/words
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/type
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/channels
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/port_encoding
+
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/min_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/words
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/type
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/channels
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/port_encoding
 
 Date:		May 2020
 

Documentation/devicetree/bindings/arm/coresight.txt

@@ -127,6 +127,11 @@ its hardware characteristcs.
 	* arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
 	  use the SG mode on this system.
 
+	* arm,max-burst-size: The maximum burst size initiated by TMC on the
+	  AXI master interface. The burst size can be in the range [0..15],
+	  the setting supports one data transfer per burst up to a maximum of
+	  16 data transfers per burst.
+
 * Optional property for CATU :
 	* interrupts : Exactly one SPI may be listed for reporting the address
 	  error

Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,tusb320
+    enum:
+      - ti,tusb320
+      - ti,tusb320l
 
   reg:
     maxItems: 1