BlinkID SDK for Android

BlinkID SDK for Android is SDK that enables you to perform scans of various ID cards in your app. You can simply integrate the SDK into your app by following the instructions below and your app will be able to benefit the scanning feature for following ID card standards:

As of version 1.8.0 you can also scan barcodes and perform OCR of structurized or free-form text. Supported barcodes are the same as in sister product PDF417.mobi.

Using BlinkID in your app requires a valid license key. You can obtain a trial license key by registering to Microblink dashboard. After registering, you will be able to generate a license key for your app. License key is bound to package name of your app, so please make sure you enter the correct package name when asked.

See below for more information about how to integrate BlinkID SDK into your app and also check latest Release notes.

Table of contents

Android BlinkID integration instructions
Quick Start
Advanced BlinkID integration instructions
Using direct API for recognition of Android Bitmaps
Recognition settings and results
Detection settings and results
Translation and localization
Embedding BlinkID inside another SDK
- BlinkID licensing model
- Ensuring the final app gets all resources required by BlinkID
Processor architecture considerations
Troubleshooting
- Integration problems
- SDK problems
- Frequently asked questions and known problems
Additional info

Android BlinkID integration instructions

The package contains Android Archive (AAR) that contains everything you need to use BlinkID library. Besides AAR, package also contains a sample project that contains following modules:

BlinkIDSample module demonstrates quick and simple integration of BlinkID library
BlinkIDSampleCustomUI demonstrates advanced integration within custom scan activity
BlinkIDCustomCombinedSample demonstrates advanced custom UI integration and usage of the combined recognizers within a custom scan activity.
BlinkIDSampleCustomSegmentScan demonstrates advanced integration of SegmentScan feature within custom scan activity. It also demonstrates how to perform generic OCR of full camera frame, how to draw OCR results on screen and how to obtain OcrResult object for further processing.
BlinkIDDetectorSample demonstrates how to perform document detection and obtain dewarped image of detected document
BlinkIDDirectApiSample demonstrates how to perform scanning of Android Bitmaps
BlinkIDImageListenerSample demonstrates how to obtain document images by using provided ScanCard activity and ImageListener
BlinkIDRandomScanSample demonstrates the usage of the provided RandomScanActivity and random scan feature, which is similar to segment scan, but does not force the user to scan text segments in the predefined order.

Source code of all sample apps is given to you to show you how to perform integration of BlinkID SDK into your app. You can use this source code and all resources as you wish. You can use sample apps as basis for creating your own app, or you can copy/paste code and/or resources from sample apps into your app and use them as you wish without even asking us for permission.

BlinkID is supported in Android SDK version 16 (Android 4.1) or later.

The library contains several activities that are responsible for camera control and recognition:

ScanCard is designed for scanning ID documents, passports and driver licenses (both UK and US)
Pdf417ScanActivity is designed for scanning barcodes
SegmentScanActivity is specifically designed for segment scanning. Unlike other activities, SegmentScanActivity does not extend BaseScanActivity, so it requires a bit different initialization parameters. Please see BlinkIDSample app for example and read section about customizing SegmentScanActivity.
RandomScanActivity is similar to SegmentScanActivity but it does not force the user to scan text segments in the predefined order.
VerificationFlowActivity is designed for scanning multiple parts/sides of the document by using provided combined recognizers.

You can also create your own scanning UI - you just need to embed RecognizerView into your activity and pass activity's lifecycle events to it and it will control the camera and recognition process. For more information, see Embedding RecognizerView into custom scan activity.

Quick Start

Quick start with sample app

Open Android Studio.
In Quick Start dialog choose Import project (Eclipse ADT, Gradle, etc.).
In File dialog select BlinkIDSample folder.
Wait for project to load. If Android studio asks you to reload project on startup, select Yes.

Integrating BlinkID into your project using Maven

Maven repository for BlinkID SDK is: http://maven.microblink.com. If you do not want to perform integration via Maven, simply skip to Android Studio integration instructions or Eclipse integration instructions.

Using gradle or Android Studio

In your build.gradle you first need to add BlinkID maven repository to repositories list:

repositories {
	maven { url 'http://maven.microblink.com' }
}

After that, you just need to add BlinkID as a dependency to your application (make sure, transitive is set to true):

dependencies {
    implementation('com.microblink:blinkid:3.16.0@aar') {
    	transitive = true
    }
}

Import Javadoc to Android Studio

Current version of Android Studio will not automatically import javadoc from maven dependency, so you have you do that manually. To do that, follow these steps:

In Android Studio project sidebar, ensure project view is enabled
Expand External Libraries entry (usually this is the last entry in project view)
Locate blinkid-3.16.0 entry, right click on it and select Library Properties...
A Library Properties pop-up window will appear
Click the second + button in bottom left corner of the window (the one that contains + with little globe)
Window for definining documentation URL will appear
Enter following address: https://blinkid.github.io/blinkid-android/
Click OK

Using android-maven-plugin

Android Maven Plugin v4.0.0 or newer is required.

Open your pom.xml file and add these directives as appropriate:

<repositories>
   	<repository>
       	<id>MicroblinkRepo</id>
       	<url>http://maven.microblink.com</url>
   	</repository>
</repositories>

<dependencies>
	<dependency>
		  <groupId>com.microblink</groupId>
		  <artifactId>blinkid</artifactId>
		  <version>3.16.0</version>
		  <type>aar</type>
  	</dependency>
</dependencies>

Android studio integration instructions

In Android Studio menu, click File, select New and then select Module.
In new window, select Import .JAR or .AAR Package, and click Next.
In File name field, enter the path to LibBlinkID.aar and click Finish.

In your app's build.gradle, add dependency to LibBlinkID and appcompat-v7:

dependencies {
	implementation project(':LibBlinkID')
	implementation "com.android.support:appcompat-v7:27.1.0"
}

Import Javadoc to Android Studio

In Android Studio project sidebar, ensure project view is enabled
Expand External Libraries entry (usually this is the last entry in project view)
Locate LibBlinkID-unspecified entry, right click on it and select Library Properties...
A Library Properties pop-up window will appear
Click the + button in bottom left corner of the window
Window for choosing JAR file will appear
Find and select LibBlinkID-javadoc.jar file which is located in root folder of the SDK distribution
Click OK

Eclipse integration instructions

We do not provide Eclipse integration demo apps. We encourage you to use Android Studio. We also do not test integrating BlinkID with Eclipse. If you are having problems with BlinkID, make sure you have tried integrating it with Android Studio prior contacting us.

However, if you still want to use Eclipse, you will need to convert AAR archive to Eclipse library project format. You can do this by doing the following:

In Eclipse, create a new Android library project in your workspace.
Clear the src and res folders.
Unzip the LibBlinkID.aar file. You can rename it to zip and then unzip it using any tool.
Copy the classes.jar to libs folder of your Eclipse library project. If libs folder does not exist, create it.
Copy the contents of jni folder to libs folder of your Eclipse library project.
Replace the res folder on library project with the res folder of the LibBlinkID.aar file.

You?ve already created the project that contains almost everything you need. Now let?s see how to configure your project to reference this library project.

In the project you want to use the library (henceforth, "target project") add the library project as a dependency
Open the AndroidManifest.xml file inside LibBlinkID.aar file and make sure to copy all permissions, features and activities to the AndroidManifest.xml file of the target project.
Copy the contents of assets folder from LibBlinkID.aar into assets folder of target project. If assets folder in target project does not exist, create it.
Clean and Rebuild your target project
Add appcompat-v7 library to your workspace and reference it by target project (modern ADT plugin for Eclipse does this automatically for all new android projects).

Performing your first scan

You can start recognition process by starting ScanCard activity with Intent initialized in the following way:

// Intent for ScanCard Activity
Intent intent = new Intent(this, ScanCard.class);

// set your licence key
// obtain your licence key at http://microblink.com/login or
// contact us at http://help.microblink.com
intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Add your licence key here");

RecognitionSettings settings = new RecognitionSettings();
// setup array of recognition settings (described in chapter "Recognition 
// settings and results")
settings.setRecognizerSettingsArray(setupSettingsArray());
intent.putExtra(ScanCard.EXTRAS_RECOGNITION_SETTINGS, settings);

// Starting Activity
startActivityForResult(intent, MY_REQUEST_CODE);

After ScanCard activity finishes the scan, it will return to the calling activity and will call method onActivityResult. You can obtain the scanning results in that method.

@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
	super.onActivityResult(requestCode, resultCode, data);
	
	if (requestCode == MY_REQUEST_CODE) {
		if (resultCode == ScanCard.RESULT_OK && data != null) {
			// perform processing of the data here
			
			// for example, obtain parcelable recognition result
			Bundle extras = data.getExtras();
			RecognitionResults result = data.getParcelableExtra(ScanCard.EXTRAS_RECOGNITION_RESULTS);

			// get array of recognition results
			BaseRecognitionResult[] resultArray = result.getRecognitionResults();				
			// Each element in resultArray inherits BaseRecognitionResult class and
			// represents the scan result of one of activated recognizers that have
			// been set up. More information about this can be found in 
			// "Recognition settings and results" chapter
					
			// Or, you can pass the intent to another activity
			data.setComponent(new ComponentName(this, ResultActivity.class));
			startActivity(data);
		}
	}
}

For more information about defining recognition settings and obtaining scan results see Recognition settings and results.

Performing your first segment scan

You can start recognition process by starting SegmentScanActivity activity with Intent initialized in the following way:

// Intent for SegmentScanActivity Activity
Intent intent = new Intent(this, SegmentScanActivity.class);

// set your licence key
// obtain your licence key at http://microblink.com/login or
// contact us at http://help.microblink.com
intent.putExtra(SegmentScanActivity.EXTRAS_LICENSE_KEY, "Add your licence key here");

// setup array of scan configurations. Each scan configuration
// contains 4 elements: resource ID for title displayed
// in SegmentScanActivity activity, resource ID for text
// displayed in activity, name of the scan element (used
// for obtaining results) and parser setting defining
// how the data will be extracted.
// For more information about parser setting, check the
// chapter "Scanning segments with BlinkInput recognizer"
ScanConfiguration[] confArray = new ScanConfiguration[] {
	new ScanConfiguration(R.string.amount_title, R.string.amount_msg, "Amount", new AmountParserSettings()),
	new ScanConfiguration(R.string.email_title, R.string.email_msg, "EMail", new EMailParserSettings()),
	new ScanConfiguration(R.string.raw_title, R.string.raw_msg, "Raw", new RawParserSettings())
};
intent.putExtra(SegmentScanActivity.EXTRAS_SCAN_CONFIGURATION, confArray);

// Starting Activity
startActivityForResult(intent, MY_REQUEST_CODE);

After SegmentScanActivity activity finishes the scan, it will return to the calling activity and will call method onActivityResult. You can obtain the scanning results in that method.

@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
	super.onActivityResult(requestCode, resultCode, data);
	
	if (requestCode == MY_REQUEST_CODE) {
		if (resultCode == SegmentScanActivity.RESULT_OK && data != null) {
			// perform processing of the data here
			
			// for example, obtain parcelable recognition result
			Bundle extras = data.getExtras();
			Bundle results = extras.getBundle(SegmentScanActivity.EXTRAS_SCAN_RESULTS);
			
			// results bundle contains result strings in keys defined
			// by scan configuration name
			// for example, if set up as in step 1, then you can obtain
			// e-mail address with following line
			String email = results.getString("EMail");
		}
	}
}

Performing your first random scan

For random scan, use provided RandomScanActivity activity with Intent initialized in the following way:

// Intent for RandomScanActivity Activity
Intent intent = new Intent(this, RandomScanActivity.class);

// set your licence key
// obtain your licence key at http://microblink.com/login or
// contact us at http://help.microblink.com
intent.putExtra(RandomScanActivity.EXTRAS_LICENSE_KEY, "Add your licence key here");

// setup array of random scan elements. Each scan element
// holds following scan settings: resource ID (or string) for title displayed
// in RandomScanActivity activity, name of the scan element (used
// for obtaining results, must be unique) and parser setting defining
// how the data will be extracted. In random scan, all scan elements should have
// distinct parser types.
// For more information about parser setting, check the
// chapter "Scanning segments with BlinkInput recognizer"

RandomScanElement date = new RandomScanElement(R.string.date_title, "Date", new DateParserSettings());
// element can be optional, which means that result can be returned without scannig that element
date.setOptional(true);
RandomScanElement[] elemsArray = new RandomScanElement[] {
	new RandomScanElement(R.string.iban_title, "IBAN", new IbanParserSettings()),
	new RandomScanElement(R.string.amount_title, "Amount", new AmountParserSettings()),
	date};
intent.putExtra(RandomScanActivity.EXTRAS_SCAN_CONFIGURATION, elemsArray);

// Starting Activity
startActivityForResult(intent, MY_REQUEST_CODE);

You can obtain the scanning results in the onActivityResult of the calling activity.

@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
	super.onActivityResult(requestCode, resultCode, data);
	
	if (requestCode == MY_REQUEST_CODE) {
		if (resultCode == Activity.RESULT_OK && data != null) {
			// perform processing of the data here
			
			// for example, obtain parcelable recognition result
			Bundle extras = data.getExtras();
			Bundle results = extras.getBundle(RandomScanActivity.EXTRAS_SCAN_RESULTS);
			
			// results bundle contains result strings in keys defined
			// by scan element names
			// for example, if set up as in step 1, then you can obtain
			// IBAN with following line
			String iban = results.getString("IBAN");
		}
	}
}

Advanced BlinkID integration instructions

This section will cover more advanced details in BlinkID integration. First part will discuss the methods for checking whether BlinkID is supported on current device. Second part will cover the possible customization of builtin ScanCard activity, third part will describe how to embed RecognizerView into your activity and fourth part will describe how to use direct API to recognize directly android bitmaps without the need of camera.

Checking if BlinkID is supported

BlinkID requirements

Even before starting the scan activity, you should check if BlinkID is supported on current device. In order to be supported, device needs to have camera.

OpenGL ES 2.0 can be used to accelerate BlinkID's processing but is not mandatory. However, it should be noted that if OpenGL ES 2.0 is not available processing time will be significantly large, especially on low end devices.

Android 4.1 is the minimum android version on which BlinkID is supported. For best performance and compatibility, we recommend Android 5.0 or newer.

Camera video preview resolution also matters. In order to perform successful scans, camera preview resolution cannot be too low. BlinkID requires minimum 480p camera preview resolution in order to perform scan. It must be noted that camera preview resolution is not the same as the video record resolution, although on most devices those are the same. However, there are some devices that allow recording of HD video (720p resolution), but do not allow high enough camera preview resolution (for example, Sony Xperia Go supports video record resolution at 720p, but camera preview resolution is only 320p - BlinkID does not work on that device).

BlinkID is native application, written in C++ and available for multiple platforms. Because of this, BlinkID cannot work on devices that have obscure hardware architectures. We have compiled BlinkID native code only for most popular Android ABIs. See Processor architecture considerations for more information about native libraries in BlinkID and instructions how to disable certain architectures in order to reduce the size of final app.

Checking for BlinkID support in your app

To check whether the BlinkID is supported on the device, you can do it in the following way:

// check if BlinkID is supported on the device
RecognizerCompatibilityStatus status = RecognizerCompatibility.getRecognizerCompatibilityStatus(this);
if(status == RecognizerCompatibilityStatus.RECOGNIZER_SUPPORTED) {
	Toast.makeText(this, "BlinkID is supported!", Toast.LENGTH_LONG).show();
} else {
	Toast.makeText(this, "BlinkID is not supported! Reason: " + status.name(), Toast.LENGTH_LONG).show();
}

However, some recognizers require camera with autofocus. If you try to start recognition with those recognizers on a device that does not have camera with autofocus, you will get an error. To prevent that, when you prepare the array with recognition settings (see Recognition settings and results for settings reference), you can easily filter out all settings that require autofocus from array using the following code snippet:

// setup array of recognition settings (described in chapter "Recognition 
// settings and results")
RecognizerSettings[] settArray = setupSettingsArray();
if(!RecognizerCompatibility.cameraHasAutofocus(CameraType.CAMERA_BACKFACE, this)) {
	setarr = RecognizerSettingsUtils.filterOutRecognizersThatRequireAutofocus(setarr);
}

Customization of `ScanCard` activity

`ScanCard` intent extras

This section will discuss possible parameters that can be sent over Intent for ScanCard activity that can customize default behaviour. There are several intent extras that can be sent to ScanCard actitivy:

# ScanCard.EXTRAS_CAMERA_TYPE - with this extra you can define which camera on device will be used. To set the extra to intent, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_CAMERA_TYPE, (Parcelable)CameraType.CAMERA_FRONTFACE);
```
# ScanCard.EXTRAS_CAMERA_ASPECT_MODE - with this extra you can define which camera aspect mode will be used. If set to ASPECT_FIT (default), then camera preview will be letterboxed inside available view space. If set to ASPECT_FILL, camera preview will be zoomed and cropped to use the entire view space. To set the extra to intent, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_CAMERA_ASPECT_MODE, (Parcelable)CameraAspectMode.ASPECT_FIT);
```

# ScanCard.EXTRAS_RECOGNITION_SETTINGS - with this extra you can define settings that affect whole recognition process. This includes both array of recognizer settings and global recognition settings. More information about recognition settings can be found in chapter Recognition settings and results. To set the extra to intent, use the following code snippet:

 RecognitionSettings recognitionSettings = new RecognitionSettings();
 // define additional settings; e.g set timeout to 10 seconds
 recognitionSettings.setNumMsBeforeTimeout(10000);
 // setup recognizer settings array
 recognitionSettings.setRecognizerSettingsArray(setupSettingsArray());
 intent.putExtra(ScanCard.EXTRAS_RECOGNITION_SETTINGS, recognitionSettings);

# ScanCard.EXTRAS_RECOGNITION_RESULTS - you can use this extra in onActivityResult method of calling activity to obtain recognition results. For more information about recognition settings and result, see Recognition settings and results. You can use the following snippet to obtain scan results:
```
 RecognitionResults results = data.getParcelableExtra(ScanCard.EXTRAS_RECOGNITION_RESULTS);
```
# ScanCard.EXTRAS_OPTIMIZE_CAMERA_FOR_NEAR_SCANNING - with this extra you can give a hint to BlinkID to optimize camera parameters for near object scanning. When camera parameters are optimized for near object scanning, macro focus mode will be preferred over autofocus mode. Thus, camera will have easier time focusing on to near objects, but might have harder time focusing on far objects. If you expect that most of your scans will be performed by holding the device very near the object, turn on that parameter. By default, this parameter is set to false.
# ScanCard.EXTRAS_BEEP_RESOURCE - with this extra you can set the resource ID of the sound to be played when scan completes. You can use following snippet to set this extra:
```
 intent.putExtra(ScanCard.EXTRAS_BEEP_RESOURCE, R.raw.beep);
```
# ScanCard.EXTRAS_SPLASH_SCREEN_LAYOUT_RESOURCE - with this extra you can set the resource ID of the layout that will be used as camera splash screen while camera is being initialized. You can use following snippet to set this extra:
```
 intent.putExtra(ScanCard. EXTRAS_SPLASH_SCREEN_LAYOUT_RESOURCE, R.layout.camera_splash);
```
# ScanCard.EXTRAS_SHOW_FOCUS_RECTANGLE - with this extra you can enable showing of rectangle that displays area camera uses to measure focus and brightness when automatically adjusting its parameters. You can enable showing of this rectangle with following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_SHOW_FOCUS_RECTANGLE, true);
```
# ScanCard.EXTRAS_ALLOW_PINCH_TO_ZOOM - with this extra you can set whether pinch to zoom will be allowed on camera activity. Default is false. To enable pinch to zoom gesture on camera activity, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_ALLOW_PINCH_TO_ZOOM, true);
```
# ScanCard.EXTRAS_CAMERA_VIDEO_PRESET - with this extra you can set the video resolution preset that will be used when choosing camera resolution for scanning. For more information, see javadoc. For example, to use 720p video resolution preset, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_CAMERA_VIDEO_PRESET, (Parcelable)VideoResolutionPreset.VIDEO_RESOLUTION_720p);
```
# ScanCard.EXTRAS_SET_FLAG_SECURE - with this extra you can request setting of FLAG_SECURE on activity window which indicates that the display has a secure video output and supports compositing secure surfaces. Use this to prevent taking screenshots of the activity window content and to prevent content from being viewed on non-secure displays. To set FLAG_SECURE on camera activity, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_SET_FLAG_SECURE, true);
```
# ScanCard.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING - with this extra you can disable warning toast for time limited license key which is enabled by default. This warning is shown to prevent unintentional publishing of application to production with the demo license key that will expire. To disable TIME_LIMITED_LICENSE_KEY_WARNING on camera activity, use the following code snippet:
```
 intent.putExtra(ScanCard.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING, false);
```
# ScanCard.EXTRAS_LICENSE_KEY - with this extra you can set the license key for BlinkID. You can obtain your licence key from Microblink website or you can contact us at http://help.microblink.com. Once you obtain a license key, you can set it with following snippet:
```
 // set the license key
 intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
```
Licence key is bound to package name of your application. For example, if you have licence key that is bound to com.microblink.blinkid app package, you cannot use the same key in other applications. However, if you purchase Premium licence, you will get licence key that can be used in multiple applications. This licence key will then not be bound to package name of the app. Instead, it will be bound to the licencee string that needs to be provided to the library together with the licence key. To provide licencee string, use the EXTRAS_LICENSEE intent extra like this:
```
 // set the license key
 intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
 intent.putExtra(ScanCard.EXTRAS_LICENSEE, "Enter_Licensee_Here");
```
# ScanCard.EXTRAS_SHOW_OCR_RESULT - with this extra you can define whether OCR result should be drawn on camera preview as it arrives. This is enabled by default, to disable it, use the following snippet:
```
 // enable showing of OCR result
 intent.putExtra(ScanCard.EXTRAS_SHOW_OCR_RESULT, false);
```
# ScanCard.EXTRAS_SHOW_OCR_RESULT_MODE - if OCR result should be drawn on camera preview, this extra defines how it will be drawn. Here you need to pass instance of ShowOcrResultMode. By default, ShowOcrResultMode.ANIMATED_DOTS is used. You can also enable ShowOcrResultMode.STATIC_CHARS to draw recognized chars instead of dots. To set this extra, use the following snippet:
```
 // display colored static chars instead of animated dots
 intent.putExtra(ScanCard.EXTRAS_SHOW_OCR_RESULT_MODE, (Parcelable) ShowOcrResultMode.STATIC_CHARS);
```
# ScanCard.EXTRAS_IMAGE_LISTENER - with this extra you can set your implementation of ImageListener interface that will obtain images that are being processed. Make sure that your ImageListener implementation correctly implements Parcelable interface with static CREATOR field. Without this, you might encounter a runtime error. For more information and example, see Using ImageListener to obtain images that are being processed. By default, ImageListener will receive all possible images that become available during recognition process. This will introduce performance penalty because most of those images will probably not be used so sending them will just waste time. To control which images should become available to ImageListener, you can also set ImageMetadata settings with ScanCard.EXTRAS_IMAGE_METADATA_SETTINGS
# ScanCard.EXTRAS_IMAGE_METADATA_SETTINGS - with this extra you can set ImageMetadata settings which will define which images will be sent to ImageListener interface given via ScanCard.EXTRAS_IMAGE_LISTENER extra. If ImageListener is not given via Intent, then this extra has no effect. You can see example usage of ImageMetadata Settings in chapter Obtaining various metadata with MetadataListener and in provided demo apps.
# ScanCard.EXTRAS_SHOW_MRZ_DETECTION - with this extra you can prevent drawing of little white dots that describe MRZ detection position on ScanCard activity. By default, each time scanner finds a candidate that could be a MRZ, its location is drawn. To prevent this, use the following snippet:
```
 // disable drawing of MRZ detection result
 intent.putExtra(ScanCard.EXTRAS_SHOW_MRZ_DETECTION, false);
```

Customizing `ScanCard` appearance

Besides possibility to put various intent extras for customizing ScanCard behaviour, you can also change strings it displays. The procedure for changing strings in ScanCard activity are explained in Translation and localization section.

Modifying other resources.

Generally, you can also change other resources that ScanCard uses, but you are encouraged to create your own custom scan activity instead (see Embedding RecognizerView into custom scan activity).

Customization of `SegmentScanActivity` activity

`SegmentScanActivity` intent extras

This section will discuss possible parameters that can be sent over Intent for SegmentScanActivity activity that can customize default behaviour. There are several intent extras that can be sent to SegmentScanActivity actitivy:

# SegmentScanActivity.EXTRAS_SCAN_CONFIGURATION - with this extra you must set the array of ScanConfiguration objects. Each ScanConfiguration object will define specific scan configuration that will be performed. ScanConfiguration defines two string resource ID's - title of the scanned item and text that will be displayed above field where scan is performed. Besides that it defines the name of scanned item and object defining the OCR parser settings. More information about parser settings can be found in chapter Scanning segments with BlinkInput recognizer. Here is only important that each scan configuration represents a single parser group and SegmentScanActivity ensures that only one parser group is active at a time. After defining scan configuration array, you need to put it into intent extra with following code snippet:
```
 intent.putExtra(SegmentScanActivity.EXTRAS_SCAN_CONFIGURATION, confArray);
```
# SegmentScanActivity.EXTRAS_SCAN_RESULTS - you can use this extra in onActivityResult method of calling activity to obtain bundle with recognition results. Bundle will contain only strings representing scanned data under keys defined with each scan configuration. If you also need to obtain OCR result structure, then you need to perform advanced integration. You can use the following snippet to obtain scan results:
```
 Bundle results = data.getBundle(SegmentScanActivity.EXTRAS_SCAN_RESULTS);
```
# SegmentScanActivity.EXTRAS_HELP_INTENT - with this extra you can set fully initialized intent that will be sent when user clicks the help button. You can put any extras you want to your intent - all will be delivered to your activity when user clicks the help button. If you do not set help intent, help button will not be shown in camera interface. To set the intent for help activity, use the following code snippet:
```
 /** Set the intent which will be sent when user taps help button. 
  *  If you don't set the intent, help button will not be shown.
  *  Note that this applies only to default PhotoPay camera UI.
  * */
 intent.putExtra(SegmentScanActivity.EXTRAS_HELP_INTENT, new Intent(this, HelpActivity.class));
```
# SegmentScanActivity.EXTRAS_CAMERA_VIDEO_PRESET - with this extra you can set the video resolution preset that will be used when choosing camera resolution for scanning. For more information, see javadoc. For example, to use 720p video resolution preset, use the following code snippet:
```
 intent.putExtra(SegmentScanActivity.EXTRAS_CAMERA_VIDEO_PRESET, (Parcelable)VideoResolutionPreset.VIDEO_RESOLUTION_720p);
```
# SegmentScanActivity.EXTRAS_SET_FLAG_SECURE - with this extra you can request setting of FLAG_SECURE on activity window which indicates that the display has a secure video output and supports compositing secure surfaces. Use this to prevent taking screenshots of the activity window content and to prevent content from being viewed on non-secure displays. To set FLAG_SECURE on camera activity, use the following code snippet:
```
 intent.putExtra(SegmentScanActivity.EXTRAS_SET_FLAG_SECURE, true);
```
# SegmentScanActivity.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING - with this extra you can disable warning toast for time limited license key which is enabled by default. This warning is shown to prevent unintentional publishing of application to production with the demo license key that will expire. To disable TIME_LIMITED_LICENSE_KEY_WARNING on camera activity, use the following code snippet:
```
 intent.putExtra(SegmentScanActivity.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING, false);
```
# ScanCard.EXTRAS_LICENSE_KEY - with this extra you can set the license key for BlinkID. You can obtain your licence key from Microblink website or you can contact us at http://help.microblink.com. Once you obtain a license key, you can set it with following snippet:
```
 // set the license key
 intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
```
Licence key is bound to package name of your application. For example, if you have licence key that is bound to com.microblink.blinkid app package, you cannot use the same key in other applications. However, if you purchase Premium licence, you will get licence key that can be used in multiple applications. This licence key will then not be bound to package name of the app. Instead, it will be bound to the licencee string that needs to be provided to the library together with the licence key. To provide licencee string, use the EXTRAS_LICENSEE intent extra like this:
```
 // set the license key
 intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
 intent.putExtra(ScanCard.EXTRAS_LICENSEE, "Enter_Licensee_Here");
```
# ScanCard.EXTRAS_SHOW_OCR_RESULT - with this extra you can define whether OCR result should be drawn on camera preview as it arrives. This is enabled by default, to disable it, use the following snippet:
```
 // enable showing of OCR result
 intent.putExtra(ScanCard.EXTRAS_SHOW_OCR_RESULT, false);
```
# ScanCard.EXTRAS_SHOW_OCR_RESULT_MODE - if OCR result should be drawn on camera preview, this extra defines how it will be drawn. Here you need to pass instance of ShowOcrResultMode. By default, ShowOcrResultMode.ANIMATED_DOTS is used. You can also enable ShowOcrResultMode.STATIC_CHARS to draw recognized chars instead of dots. To set this extra, use the following snippet:
```
 // display colored static chars instead of animated dots
 intent.putExtra(ScanCard.EXTRAS_SHOW_OCR_RESULT_MODE, (Parcelable) ShowOcrResultMode.STATIC_CHARS);
```
# ScanCard.EXTRAS_IMAGE_LISTENER - with this extra you can set your implementation of ImageListener interface that will obtain images that are being processed. Make sure that your ImageListener implementation correctly implements Parcelable interface with static CREATOR field. Without this, you might encounter a runtime error. For more information and example, see Using ImageListener to obtain images that are being processed. By default, ImageListener will receive all possible images that become available during recognition process. This will introduce performance penalty because most of those images will probably not be used so sending them will just waste time. To control which images should become available to ImageListener, you can also set ImageMetadata settings with ScanCard.EXTRAS_IMAGE_METADATA_SETTINGS
# ScanCard.EXTRAS_IMAGE_METADATA_SETTINGS - with this extra you can set ImageMetadata settings which will define which images will be sent to ImageListener interface given via ScanCard.EXTRAS_IMAGE_LISTENER extra. If ImageListener is not given via Intent, then this extra has no effect. You can see example usage of ImageMetadata Settings in chapter Obtaining various metadata with MetadataListener and in provided demo apps.

Customization of `RandomScanActivity` activity

RandomScanActivity accepts similar intent extras as SegmentScanActivity with few differences listed below.

# RandomScanActivity.EXTRAS_SCAN_CONFIGURATION With this extra you must set the array of RandomScanElement objects. Each RandomScanElement holds following information about scan element: title of the scanned item, name of scanned item and object defining the OCR parser settings. Additionally, it is possible to set parser group for a parser that is responsible for extracting the element data by using the setParserGroup(String groupName) method on RandomScanElement object. If all parsers are in the same parser group, recognition will be faster, but sometimes merged OCR engine options may cause that some parsers are unable to extract valid data from the scanned text. Putting each parser into its own group will give better accuracy, but will perform OCR of image for each parser which can consume a lot of processing time. By default, if parser groups are not defined, all parsers will be placed in the same parser group. More information about parser settings can be found in chapter Scanning segments with BlinkInput recognizer.
# RandomScanActivity.EXTRAS_SCAN_MESSAGE With this extra, it is possible to change default scan message that is displayed above the scanning window. You can use the following code snippet to set scan message string:
```
intent.putExtra(RandomScanActivity.EXTRAS_SCAN_MESSAGE, message);
```
# RandomScanActivity.EXTRAS_BEEP_RESOURCE With this extra you can set the resource ID of the sound to be played when the scan element is recognized. You can use following snippet to set this extra
```
intent.putExtra(RandomScanActivity.EXTRAS_BEEP_RESOURCE, R.raw.beep);
```

Using `VerificationFlowActivity` and combined recognizers for scanning multiple parts/sides of the document

VerificationFlowActivity is designed for scanning multiple parts/sides of the document by using provided combined recognizers, which are subclasses of the CombinedRecognizerSettings.

Combined recognizers are special types of recognizers that are implemented for scanning multiple parts/sides of the document in predefined order. They combine results from individual scans to boost accuracy and merge them into the final result. For example, if front and back side of the ID card is scanned and the same information can be read from the front and back side, its scanned values will be compared and combined in order to return the final value with higher confidence.

Document scan is performed in multiple steps with predefined order. When some step is completed VerificationFlowActivity will make appropriate UI changes to inform the user to scan next part/side of the document. You can start recognition process by starting VerificationFlowActivity activity with Intent initialized in the following way:

// Intent for VerificationFlowActivity Activity
Intent intent = new Intent(this, VerificationFlowActivity.class);

// set your license key
// obtain your license key at http://microblink.com/login or
// contact us at http://help.microblink.com
intent.putExtra(VerificationFlowActivity.EXTRAS_LICENSE_KEY, Config.getLicenseKey());

// create appropriate combined recognizer settings for your type of the document
CombinedRecognizerSettings recognizerSettings = createCombinedRecognizerSettings();
// pass recognizer settings through intent extras
intent.putExtra(VerificationFlowActivity.EXTRAS_COMBINED_RECOGNIZER_SETTINGS, recognizerSettings);
// Starting Activity
startActivityForResult(intent, MY_REQUEST_CODE);

After VerificationFlowActivity activity finishes the scan, it will return to the calling activity and will call method onActivityResult. You can obtain the scanning results in that method.

@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
	super.onActivityResult(requestCode, resultCode, data);
		
	if (requestCode == MY_REQUEST_CODE) {
		if (resultCode == VerificationFlowActivity.RESULT_OK && data != null) {
			// perform processing of the data here
				
			// for example, obtain parcelable recognition result
			Bundle extras = data.getExtras();
			// All combined recognizers produce results of type CombinedRecognitionResult.
			// Instead of casting to CombinedRecognitionResult, you should cast the combined
			// recognition result to the exact result type that is expected for used
			// combined recognizer.
			CombinedRecognitionResult combinedResult = (CombinedRecognitionResult) extras.getParcelable(
			    VerificationFlowActivity.EXTRAS_COMBINED_RECOGNITION_RESULT
			);
			    
			// do something with the result
		}
	}
}

`VerificationFlowActivity` intent extras

This section will discuss possible parameters that can be sent over Intent for VerificationFlowActivity activity that can customize default behaviour. There are several intent extras that can be sent to VerificationFlowActivity actitivy:

# VerificationFlowActivity.EXTRAS_COMBINED_RECOGNIZER_SETTINGS - Settings for the combined recognizer that will be used. Must be instance of the CombinedRecognizerSettings.
# VerificationFlowActivity.EXTRAS_COMBINED_RECOGNITION_RESULT - you can use this extra in onActivityResult method of calling activity to obtain combined recognition result.
# VerificationFlowActivity.EXTRAS_COMBINED_CAMERA_TYPE - with this extra you can define which camera on device will be used. By default back facing camera is used. To set the extra to intent, use the following code snippet:
```
 intent.putExtra(VerificationFlowActivity.EXTRAS_COMBINED_CAMERA_TYPE, (Parcelable)CameraType.CAMERA_BACKFACE);
```
# VerificationFlowActivity.EXTRAS_WARNING_DIALOG_NOT_MATCH_TITLE_RES, VerificationFlowActivity.EXTRAS_WARNING_DIALOG_NOT_MATCH_MESSAGE_RES, VerificationFlowActivity.EXTRAS_WARNING_DIALOG_NOT_MATCH_BUTTON_TEXT_RES - with these intent extras you can define String resource IDs for the title, message and button texts of the warning dialog that is shown when combined recognizer data does not pass validation (e.g. document sides don't match).
# VerificationFlowActivity.EXTRAS_SPLASH_MSG_RES_DOCUMENT_FIRST_SIDE, VerificationFlowActivity.EXTRAS_SPLASH_MSG_RES_DOCUMENT_SECOND_SIDE - with these intent extras you can define String resource IDs for the splash screen messages that will be shown above document scan viewfinder when scanning of the first/second side of the document is starting.
# VerificationFlowActivity.EXTRAS_SPLASH_ICON_RES_DOCUMENT_FIRST_SIDE, VerificationFlowActivity.EXTRAS_SPLASH_ICON_RES_DOCUMENT_SECOND_SIDE - with these intent extras you can define Drawable resource IDs of the splash screen images that will be shown above document scan viewfinder when scanning of the first/second side of the document is starting.
# VerificationFlowActivity.EXTRAS_INSTRUCTIONS_DOCUMENT_FIRST_SIDE, VerificationFlowActivity.EXTRAS_INSTRUCTIONS_DOCUMENT_SECOND_SIDE - with these intent extras you can define String resource IDs of the scan instructions that will be shown to the user as camera overlay during recognition of the first/second side of the document.
# VerificationFlowActivity.EXTRAS_BEEP_RESOURCE - with this extra you can set the resource ID of the sound to be played when scan completes. You can use following snippet to set this extra:
```
 intent.putExtra(VerificationFlowActivity.EXTRAS_BEEP_RESOURCE, R.raw.beep);
```
# VerificationFlowActivity.EXTRAS_SCAN_RESULT_LISTENER - with this extra you can set a ParcelableScanResultListener with callback that will be called when valid recognition result is available (for each result that is produced by activated recognizer). When scan result listener is passed to the activity, recognition results will not be returned to the caller activity through result intent. Scan result listener must be used in cases when size of the recognition results exceeds the allowed Android intent size limit.
# VerificationFlowActivity.EXTRAS_USE_LEGACY_CAMERA_API - with this boolean flag you can enforce using legacy Camera API even on Lollipop devices that support new Camera2 API. Use this only if you have problems with camera management on Lollipop devices.
# VerificationFlowActivity.EXTRAS_SET_FLAG_SECURE - with this extra you can request setting of FLAG_SECURE on activity window which indicates that the display has a secure video output and supports compositing secure surfaces. Use this to prevent taking screenshots of the activity window content and to prevent content from being viewed on non-secure displays. To set FLAG_SECURE on camera activity, use the following code snippet:
```
 intent.putExtra(VerificationFlowActivity.EXTRAS_SET_FLAG_SECURE, true);
```
# VerificationFlowActivity.EXTRAS_LICENSE_KEY - with this extra you can set the license key for BlinkID. You can obtain your licence key from Microblink website or you can contact us at http://help.microblink.com. Once you obtain a license key, you can set it with following snippet:
```
 // set the license key
 intent.putExtra(VerificationFlowActivity.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
```
Licence key is bound to package name of your application. For example, if you have licence key that is bound to com.microblink.blinkid app package, you cannot use the same key in other applications. However, if you purchase Premium licence, you will get licence key that can be used in multiple applications. This licence key will then not be bound to package name of the app. Instead, it will be bound to the licencee string that needs to be provided to the library together with the licence key. To provide licencee string, use the EXTRAS_LICENSEE intent extra like this:
```
 // set the license key
 intent.putExtra(VerificationFlowActivity.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
 intent.putExtra(VerificationFlowActivity.EXTRAS_LICENSEE, "Enter_Licensee_Here");
```
# VerificationFlowActivity.EXTRAS_IMAGE_LISTENER - with this extra you can set your implementation of ImageListener interface that will obtain images that are being processed. Make sure that your ImageListener implementation correctly implements Parcelable interface with static CREATOR field. Without this, you might encounter a runtime error. For more information and example, see Using ImageListener to obtain images that are being processed. By default, ImageListener will receive all possible images that become available during recognition process. This will introduce performance penalty because most of those images will probably not be used so sending them will just waste time. To control which images should become available to ImageListener, you can also set ImageMetadata settings with VerificationFlowActivity.EXTRAS_IMAGE_METADATA_SETTINGS
# VerificationFlowActivity.EXTRAS_IMAGE_METADATA_SETTINGS - with this extra you can set ImageMetadata settings which will define which images will be sent to ImageListener interface given via VerificationFlowActivity.EXTRAS_IMAGE_LISTENER extra. If ImageListener is not given via Intent, then this extra has no effect. You can see example usage of ImageMetadata Settings in chapter Obtaining various metadata with MetadataListener and in provided demo apps.
# VerificationFlowActivity.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING - with this extra you can disable warning toast for time limited license key which is enabled by default. This warning is shown to prevent unintentional publishing of application to production with the demo license key that will expire. To disable TIME_LIMITED_LICENSE_KEY_WARNING on camera activity, use the following code snippet:
```
 intent.putExtra(VerificationFlowActivity.EXTRAS_SHOW_TIME_LIMITED_LICENSE_KEY_WARNING, false);
```

Embedding `RecognizerView` into custom scan activity

This section will discuss how to embed RecognizerView into your scan activity and perform scan.

First make sure that RecognizerView is a member field in your activity. This is required because you will need to pass all activity's lifecycle events to RecognizerView.
It is recommended to keep your scan activity in one orientation, such as portrait or landscape. Setting sensor as scan activity's orientation will trigger full restart of activity whenever device orientation changes. This will provide very poor user experience because both camera and BlinkID native library will have to be restarted every time. There are measures for this behaviour and will be discussed later.
In your activity's onCreate method, create a new RecognizerView, define its settings and listeners and then call its create method. After that, add your views that should be layouted on top of camera view.
Override your activity's onStart, onResume, onPause, onStop and onDestroy methods and call RecognizerView's lifecycle methods start, resume, pause, stop and destroy. This will ensure correct camera and native resource management. If you plan to manage RecognizerView's lifecycle independently of host activity's lifecycle, make sure the order of calls to lifecycle methods is the same as is with activities (i.e. you should not call resume method if create and start were not called first).

Here is the minimum example of integration of RecognizerView as the only view in your activity:

public class MyScanActivity extends Activity implements ScanResultListener, CameraEventsListener {
	private static final int PERMISSION_CAMERA_REQUEST_CODE = 69;
	private RecognizerView mRecognizerView;
		
	@Override
	protected void onCreate(Bundle savedInstanceState) {				
		// create RecognizerView
		mRecognizerView = new RecognizerView(this);
		   
		RecognitionSettings settings = new RecognitionSettings();
		// setup array of recognition settings (described in chapter "Recognition 
		// settings and results")
		RecognizerSettings[] settArray = setupSettingsArray();
		if(!RecognizerCompatibility.cameraHasAutofocus(CameraType.CAMERA_BACKFACE, this)) {
			settArray = RecognizerSettingsUtils.filterOutRecognizersThatRequireAutofocus(settArray);
		}
		settings.setRecognizerSettingsArray(settArray);
		mRecognizerView.setRecognitionSettings(settings);
		
		try {
		    // set license key
		    mRecognizerView.setLicenseKey(this, "your license key");
		} catch (InvalidLicenceKeyException exc) {
		    finish();
		    return;
		}
		
		// scan result listener will be notified when scan result gets available
		mRecognizerView.setScanResultListener(this);
		// camera events listener will be notified about camera lifecycle and errors
		mRecognizerView.setCameraEventsListener(this);
		
		// set camera aspect mode
		// ASPECT_FIT will fit the camera preview inside the view
		// ASPECT_FILL will zoom and crop the camera preview, but will use the
		// entire view surface
		mRecognizerView.setAspectMode(CameraAspectMode.ASPECT_FILL);
		   
		mRecognizerView.create();
		
		setContentView(mRecognizerView);
	}
	
	@Override
	protected void onStart() {
	   super.onStart();
	   // you need to pass all activity's lifecycle methods to RecognizerView
	   mRecognizerView.start();
	}
	
	@Override
	protected void onResume() {
	   	super.onResume();
	   	// you need to pass all activity's lifecycle methods to RecognizerView
       mRecognizerView.resume();
	}

	@Override
	protected void onPause() {
	   	super.onPause();
	   	// you need to pass all activity's lifecycle methods to RecognizerView
		mRecognizerView.pause();
	}

	@Override
	protected void onStop() {
	   super.onStop();
	   // you need to pass all activity's lifecycle methods to RecognizerView
	   mRecognizerView.stop();
	}
	
	@Override
	protected void onDestroy() {
	   super.onDestroy();
	   // you need to pass all activity's lifecycle methods to RecognizerView
	   mRecognizerView.destroy();
	}

	@Override
	public void onConfigurationChanged(Configuration newConfig) {
	   super.onConfigurationChanged(newConfig);
	   // you need to pass all activity's lifecycle methods to RecognizerView
	   mRecognizerView.changeConfiguration(newConfig);
	}
		
    @Override
    public void onScanningDone(RecognitionResults results) {
    	// this method is from ScanResultListener and will be called when scanning completes
    	// RecognitionResults may contain multiple results in array returned
    	// by method getRecognitionResults().
    	// This depends on settings in RecognitionSettings object that was
    	// given to RecognizerView.
    	// For more information, see chapter "Recognition settings and results")
    	
    	// After this method ends, scanning will be resumed and recognition
    	// state will be retained. If you want to prevent that, then
    	// you should call:
    	// mRecognizerView.resetRecognitionState();

		// If you want to pause scanning to prevent receiving recognition
		// results, you should call:
		// mRecognizerView.pauseScanning();
		// After scanning is paused, you will have to resume it with:
		// mRecognizerView.resumeScanning(true);
		// boolean in resumeScanning method indicates whether recognition
		// state should be automatically reset when resuming scanning
    }
    
    @Override
    public void onCameraPreviewStarted() {
        // this method is from CameraEventsListener and will be called when camera preview starts
    }
    
    @Override
    public void onCameraPreviewStopped() {
        // this method is from CameraEventsListener and will be called when camera preview stops
    }

    @Override
    public void onError(Throwable exc) {
        /** 
         * This method is from CameraEventsListener and will be called when 
         * opening of camera resulted in exception or recognition process
         * encountered an error. The error details will be given in exc
         * parameter.
         */
    }
    
    @Override
    @TargetApi(23)
    public void onCameraPermissionDenied() {
    	/**
    	 * Called on Android 6.0 and newer if camera permission is not given
    	 * by user. You should request permission from user to access camera.
    	 */
    	 requestPermissions(new String[]{Manifest.permission.CAMERA}, PERMISSION_CAMERA_REQUEST_CODE);
    	 /**
    	  * Please note that user might have not given permission to use 
    	  * camera. In that case, you have to explain to user that without
    	  * camera permissions scanning will not work.
    	  * For more information about requesting permissions at runtime, check
    	  * this article:
    	  * https://developer.android.com/training/permissions/requesting.html
    	  */
    }
    
    @Override
    public void onAutofocusFailed() {
	    /**
	     * This method is from CameraEventsListener will be called when camera focusing has failed. 
	     * Camera manager usually tries different focusing strategies and this method is called when all 
	     * those strategies fail to indicate that either object on which camera is being focused is too 
	     * close or ambient light conditions are poor.
	     */
    }
    
    @Override
    public void onAutofocusStarted(Rect[] areas) {
	    /**
	     * This method is from CameraEventsListener and will be called when camera focusing has started.
	     * You can utilize this method to draw focusing animation on UI.
	     * Areas parameter is array of rectangles where focus is being measured. 
	     * It can be null on devices that do not support fine-grained camera control.
	     */
    }

    @Override
    public void onAutofocusStopped(Rect[] areas) {
	    /**
	     * This method is from CameraEventsListener and will be called when camera focusing has stopped.
	     * You can utilize this method to remove focusing animation on UI.
	     * Areas parameter is array of rectangles where focus is being measured. 
	     * It can be null on devices that do not support fine-grained camera control.
	     */
    }
}

Scan activity's orientation

If activity's screenOrientation property in AndroidManifest.xml is set to sensor, fullSensor or similar, activity will be restarted every time device changes orientation from portrait to landscape and vice versa. While restarting activity, its onPause, onStop and onDestroy methods will be called and then new activity will be created anew. This is a potential problem for scan activity because in its lifecycle it controls both camera and native library - restarting the activity will trigger both restart of the camera and native library. This is a problem because changing orientation from landscape to portrait and vice versa will be very slow, thus degrading a user experience. We do not recommend such setting.

For that matter, we recommend setting your scan activity to either portrait or landscape mode and handle device orientation changes manually. To help you with this, RecognizerView supports adding child views to it that will be rotated regardless of activity's screenOrientation. You add a view you wish to be rotated (such as view that contains buttons, status messages, etc.) to RecognizerView with addChildView method. The second parameter of the method is a boolean that defines whether the view you are adding will be rotated with device. To define allowed orientations, implement OrientationAllowedListener interface and add it to RecognizerView with method setOrientationAllowedListener. This is the recommended way of rotating camera overlay.

However, if you really want to set screenOrientation property to sensor or similar and want Android to handle orientation changes of your scan activity, then we recommend to set configChanges property of your activity to orientation|screenSize. This will tell Android not to restart your activity when device orientation changes. Instead, activity's onConfigurationChanged method will be called so that activity can be notified of the configuration change. In your implementation of this method, you should call changeConfiguration method of RecognizerView so it can adapt its camera surface and child views to new configuration. Note that on Android versions older than 4.0 changing of configuration will require restart of camera, which can be slow.

`RecognizerView` reference

The complete reference of RecognizerView is available in Javadoc. The usage example is provided in BlinkIDSampleCustomUI demo app provided with SDK. This section just gives a quick overview of RecognizerView's most important methods.

`create()`

This method should be called in activity's onCreate method. It will initialize RecognizerView's internal fields and will initialize camera control thread. This method must be called after all other settings are already defined, such as listeners and recognition settings. After calling this method, you can add child views to RecognizerView with method addChildView(View, boolean).

`start()`

This method should be called in activity's onStart method. It will initialize background processing thread and start native library initialization on that thread.

`resume()`

This method should be called in activity's onResume method. It will trigger background initialization of camera. After camera is loaded, it will start camera frame recognition, except if scanning loop is paused.

`pause()`

This method should be called in activity's onPause method. It will stop the camera, but will keep native library loaded.

`stop()`

This method should be called in activity's onStop method. It will deinitialize native library, terminate background processing thread and free all resources that are no longer necessary.

`destroy()`

This method should be called in activity's onDestroy method. It will free all resources allocated in create() and will terminate camera control thread.

`changeConfiguration(Configuration)`

This method should be called in activity's onConfigurationChanged method. It will adapt camera surface to new configuration without the restart of the activity. See Scan activity's orientation for more information.

`setCameraType(CameraType)`

With this method you can define which camera on device will be used. Default camera used is back facing camera.

`setAspectMode(CameraAspectMode)`

Define the aspect mode of camera. If set to ASPECT_FIT (default), then camera preview will be letterboxed inside available view space. If set to ASPECT_FILL, camera preview will be zoomed and cropped to use the entire view space.

`setVideoResolutionPreset(VideoResolutionPreset)`

Define the video resolution preset that will be used when choosing camera resolution for scanning.

`setRecognitionSettings(RecognitionSettings)`

With this method you can set recognition settings that contains information what will be scanned and how will scan be performed. For more information about recognition settings and results see Recognition settings and results. This method must be called before create().

`reconfigureRecognizers(RecognitionSettings)`

With this method you can reconfigure the recognition process while recognizer is active. Unlike setRecognitionSettings, this method must be called while recognizer is active (i.e. after resume was called). For more information about recognition settings see Recognition settings and results.

`setOrientationAllowedListener(OrientationAllowedListener)`

With this method you can set a OrientationAllowedListener which will be asked if current orientation is allowed. If orientation is allowed, it will be used to rotate rotatable views to it and it will be passed to native library so that recognizers can be aware of the new orientation. If you do not set this listener, recognition will be performed only in orientation defined by current activity's orientation.

`setScanResultListener(ScanResultListener)`

With this method you can set a ScanResultListener which will be notified when recognition completes. After recognition completes, RecognizerView will pause its scanning loop and to continue the scanning you will have to call resumeScanning method. In this method you can obtain data from scanning results. For more information see Recognition settings and results.

`setCameraEventsListener(CameraEventsListener)`

With this method you can set a CameraEventsListener which will be notified when various camera events occur, such as when camera preview has started, autofocus has failed or there has been an error while using the camera or performing the recognition.

`pauseScanning()`

This method pauses the scanning loop, but keeps both camera and native library initialized. Pause and resume scanning methods count the number of calls, so if you called pauseScanning() twice, you will have to call resumeScanning twice to actually resume scanning.

`resumeScanning(boolean)`

With this method you can resume the paused scanning loop. If called with true parameter, implicitly calls resetRecognitionState(). If called with false, old recognition state will not be reset, so it could be reused for boosting recognition result. This may not be always a desired behaviour. Pause and resume scanning methods count the number of calls, so if you called pauseScanning() twice, you will have to call resumeScanning twice to actually resume scanning loop.

`resetRecognitionState()`

With this method you can reset internal recognition state. State is usually kept to improve recognition quality over time, but without resetting recognition state sometimes you might get poorer results (for example if you scan one object and then another without resetting state you might end up with result that contains properties from both scanned objects).

`addChildView(View, boolean)`

With this method you can add your own view on top of RecognizerView. RecognizerView will ensure that your view will be layouted exactly above camera preview surface (which can be letterboxed if aspect ratio of camera preview size does not match the aspect ratio of RecognizerView and camera aspect mode is set to ASPECT_FIT). Boolean parameter defines whether your view should be rotated with device orientation changes. The rotation is independent of host activity's orientation changes and allowed orientations will be determined from OrientationAllowedListener. See also Scan activity's orientation for more information why you should rotate your views independently of activity.

`isCameraFocused()`

This method returns true if camera thinks it has focused on object. Note that camera has to be active for this method to work. If camera is not active, returns false.

`focusCamera()`

This method requests camera to perform autofocus. If camera does not support autofocus feature, method does nothing. Note that camera has to be active for this method to work.

`isCameraTorchSupported()`

This method returns true if camera supports torch flash mode. Note that camera has to be active for this method to work. If camera is not active, returns false.

`setTorchState(boolean, SuccessCallback)`

If torch flash mode is supported on camera, this method can be used to enable/disable torch flash mode. After operation is performed, SuccessCallback will be called with boolean indicating whether operation has succeeded or not. Note that camera has to be active for this method to work and that callback might be called on background non-UI thread.

`setScanningRegion(Rectangle, boolean)`

You can use this method to define the scanning region and define whether this scanning region will be rotated with device if OrientationAllowedListener determines that orientation is allowed. This is useful if you have your own camera overlay on top of RecognizerView that is set as rotatable view - you can thus synchronize the rotation of the view with the rotation of the scanning region native code will scan.

Scanning region is defined as Rectangle. First parameter of rectangle is x-coordinate represented as percentage of view width, second parameter is y-coordinate represented as percentage of view height, third parameter is region width represented as percentage of view width and fourth parameter is region height represented as percentage of view height.

View width and height are defined in current context, i.e. they depend on screen orientation. If you allow your ROI view to be rotated, then in portrait view width will be smaller than height, whilst in landscape orientation width will be larger than height. This complies with view designer preview. If you choose not to rotate your ROI view, then your ROI view will be laid out either in portrait or landscape, depending on setting for your scan activity in AndroidManifest.xml

Note that scanning region only reflects to native code - it does not have any impact on user interface. You are required to create a matching user interface that will visualize the same scanning region you set here.

`setMeteringAreas(Rectangle[],boolean)`

This method can only be called when camera is active. You can use this method to define regions which camera will use to perform meterings for focus, white balance and exposure corrections. On devices that do not support metering areas, this will be ignored. Some devices support multiple metering areas and some support only one. If device supports only one metering area, only the first rectangle from array will be used.

Each region is defined as Rectangle. First parameter of rectangle is x-coordinate represented as percentage of view width, second parameter is y-coordinate represented as percentage of view height, third parameter is region width represented as percentage of view width and fourth parameter is region height represented as percentage of view height.

View width and height are defined in current context, i.e. they depend on current device orientation. If you have custom OrientationAllowedListener, then device orientation will be the last orientation that you have allowed in your listener. If you don't have it set, orientation will be the orientation of activity as defined in AndroidManifest.xml. In portrait orientation view width will be smaller than height, whilst in landscape orientation width will be larger than height. This complies with view designer preview.

Second boolean parameter indicates whether or not metering areas should be automatically updated when device orientation changes.

`setMetadataListener(MetadataListener, MetadataSettings)`

You can use this method to define metadata listener that will obtain various metadata from the current recognition process. Which metadata will be available depends on metadata settings. For more information and examples, check demo applications and section Obtaining various metadata with MetadataListener.

`setLicenseKeyTimeLimitedWarningEnabled(boolean)`

Defines whether warning toast for time limited license key will be displayed. The goal is to prevent unintentional publishing of application to production with the license key that will expire. To take effect, this method should be called before setting the license key. By default, warning is enabled. Be careful, disable this warning only if necessary.

`setLicenseKey(String licenseKey)`

This method sets the license key that will unlock all features of the native library. You can obtain your license key from Microblink website.

`setLicenseKey(String licenseKey, String licensee)`

Use this method to set a license key that is bound to a licensee, not the application package name. You will use this method when you obtain a license key that allows you to use BlinkID SDK in multiple applications. You can obtain your license key from Microblink website.

Using direct API for recognition of Android Bitmaps

This section will describe how to use direct API to recognize android Bitmaps without the need for camera. You can use direct API anywhere from your application, not just from activities.

First, you need to obtain reference to Recognizer singleton using getSingletonInstance.
Second, you need to initialize the recognizer.
After initialization, you can use singleton to process images. You cannot process multiple images in parallel.
Do not forget to terminate the recognizer after usage (it is a shared resource).

Here is the minimum example of usage of direct API for recognizing android Bitmap:

public class DirectAPIActivity extends Activity implements ScanResultListener {
	private Recognizer mRecognizer;
		
	@Override
	protected void onCreate(Bundle savedInstanceState) {
		// initialize your activity here
	}
	
	@Override
	protected void onStart() {
	   super.onStart();
	   try {
		   mRecognizer = Recognizer.getSingletonInstance();
		} catch (FeatureNotSupportedException e) {
			Toast.makeText(this, "Feature not supported! Reason: " + e.getReason().getDescription(), Toast.LENGTH_LONG).show();
			finish();
			return;
		}
	   try {
	       // set license key
	       mRecognizer.setLicenseKey(this, "your license key");
	   } catch (InvalidLicenceKeyException exc) {
	       finish();
	       return;
	   }
		RecognitionSettings settings = new RecognitionSettings();
		// setupSettingsArray method is described in chapter "Recognition 
		// settings and results")
		settings.setRecognizerSettingsArray(setupSettingsArray());
		mRecognizer.initialize(this, settings, new DirectApiErrorListener() {
			@Override
			public void onRecognizerError(Throwable t) {
				Toast.makeText(DirectAPIActivity.this, "There was an error in initialization of Recognizer: " + t.getMessage(), Toast.LENGTH_SHORT).show();
				finish();
			}
		});
	}
	
	@Override
	protected void onResume() {
	   super.onResume();
		// start recognition
		Bitmap bitmap = BitmapFactory.decodeFile("/path/to/some/file.jpg");
		mRecognizer.recognize(bitmap, Orientation.ORIENTATION_LANDSCAPE_RIGHT, this);
	}

	@Override
	protected void onStop() {
	   super.onStop();
	   mRecognizer.terminate();
	}

    @Override
    public void onScanningDone(RecognitionResults results) {
    	// this method is from ScanResultListener and will be called 
    	// when scanning completes
    	// RecognitionResults may contain multiple results in array returned
    	// by method getRecognitionResults().
    	// This depends on settings in RecognitionSettings object that was
    	// given to RecognizerView.
    	// For more information, see chapter "Recognition settings and results")
    	    	
    	finish(); // in this example, just finish the activity
    }
    
}

Understanding DirectAPI's state machine

DirectAPI's Recognizer singleton is actually a state machine which can be in one of 4 states: OFFLINE, UNLOCKED, READY and WORKING.

When you obtain the reference to Recognizer singleton, it will be in OFFLINE state.
First you need to unlock the Recognizer by providing a valid licence key using setLicenseKey method. If you attempt to call setLicenseKey while Recognizer is not in OFFLINE state, you will get IllegalStateException.
After successful unlocking, Recognizer singleton will move to UNLOCKED state.
Once in UNLOCKED state, you can initialize Recognizer by calling initialize method. If you call initialize method while Recognizer is not in UNLOCKED state, you will get IllegalStateException.
After successful initialization, Recognizer will move to READY state. Now you can call any of the recognize* methods.
When starting recognition with any of the recognize* methods, Recognizer will move to WORKING state. If you attempt to call these methods while Recognizer is not in READY state, you will get IllegalStateException
Recognition is performed on background thread so it is safe to call all Recognizer's method from UI thread
When recognition is finished, Recognizer first moves back to READY state and then returns the result via provided ScanResultListener.
Please note that ScanResultListener's onScanningDone method will be called on background processing thread, so make sure you do not perform UI operations in this calback.
By calling terminate method, Recognizer singleton will release all its internal resources and will request processing thread to terminate. Note that even after calling terminate you might receive onScanningDone event if there was work in progress when terminate was called.
terminate method can be called from any Recognizer singleton's state
You can observe Recognizer singleton's state with method getCurrentState

Using DirectAPI while RecognizerView is active

Both RecognizerView and DirectAPI recognizer use the same internal singleton that manages native code. This singleton handles initialization and termination of native library and propagating recognition settings to native library. It is possible to use RecognizerView and DirectAPI together, as internal singleton will make sure correct synchronization and correct recognition settings are used. If you run into problems while using DirectAPI in combination with RecognizerView, let us know!

Obtaining various metadata with MetadataListener

This section will give an example how to use Metadata listener to obtain various metadata, such as object detection location, images that are being processed and much more. Which metadata will be obtainable is configured with Metadata settings. You must set both MetadataSettings and your implementation of MetadataListener before calling create method of RecognizerView. Setting them after causes undefined behaviour.

The following code snippet shows how to configure MetadataSettings to obtain detection location, video frame that was used to perform and dewarped image of the document being scanned (NOTE: the availability of metadata depends on currently active recognisers and their settings. Not all recognisers can produce all types of metadata. Check Recognition settings and results article for more information about recognisers and their settings):

// this snippet should be in onCreate method of your scanning activity

MetadataSettings ms = new MetadataSettings();
// enable receiving of detection location
ms.setDetectionMetadataAllowed(true);

// ImageMetadataSettings contains settings for defining which images will be returned
MetadataSettings.ImageMetadataSettings ims = new MetadataSettings.ImageMetadataSettings();
// enable returning of dewarped images, if they are available
ims.setDewarpedImageEnabled(true);
// enable returning of image that was used to obtain valid scanning result
ims.setSuccessfulScanFrameEnabled(true)

// set ImageMetadataSettings to MetadataSettings object
ms.setImageMetadataSettings(ims);

// this line must be called before mRecognizerView.create()
mRecognizerView.setMetadataListener(myMetadataListener, ms);

The following snippet shows one possible implementation of MetadataListener:

public class MyMetadataListener implements MetadataListener {

	/**
	 * Called when metadata is available.
	 */
    @Override
    public void onMetadataAvailable(Metadata metadata) {
    	// detection location will be available as DetectionMetadata
        if (metadata instanceof DetectionMetadata) {
        	// DetectionMetadata contains DetectorResult which is null if object detection
        	// has failed and non-null otherwise
        	// Let's assume that we have a QuadViewManager which can display animated frame
        	// around detected object (for reference, please check javadoc and demo apps)
            DetectorResult dr = ((DetectionMetadata) metadata).getDetectionResult();
            if (dr == null) {
            	// animate frame to default location if detection has failed
                mQuadViewManager.animateQuadToDefaultPosition();
            } else if (dr instanceof QuadDetectorResult) {
            	// otherwise, animate frame to detected location
                mQuadViewManager.animateQuadToDetectionPosition((QuadDetectorResult) dr);
            }
        // images will be available inside ImageMetadata
        } else if (metadata instanceof ImageMetadata) {
        	// obtain image
        	
        	// Please note that Image's internal buffers are valid only
        	// until this method ends. If you want to save image for later,
        	// obtained a cloned image with image.clone().
        	
            Image image = ((ImageMetadata) metadata).getImage();
            // to convert the image to Bitmap, call image.convertToBitmap()
            
            // after this line, image gets disposed. If you want to save it
            // for later, you need to clone it with image.clone()
        }
    }
}

Here are javadoc links to all classes that appeared in previous code snippet:

Using ImageListener to obtain images that are being processed

There are two ways of obtaining images that are being processed:

if ScanCard is being used to perform scanning, then you need to implement ImageListener interface and send your implementation via Intent to ScanCard. Note that while this seems easier, this actually introduces a large performance penalty because ImageListener will receive all images, including ones you do not actually need, except in cases when you also provide ImageMetadata settings with ScanCard.EXTRAS_IMAGE_METADATA_SETTINGS extra.
if RecognizerView is directly embedded into your scanning activity, then you should initialise it with Metadata settings and your implementation of Metadata listener interface. The MetadataSettings will define which metadata will be reported to MetadataListener. The metadata can contain various data, such as images, object detection location etc. To see documentation and example how to use MetadataListener to obtain images and other metadata, see section Obtaining various metadata with MetadataListener.

This section will give an example how to implement ImageListener interface that will obtain images that are being processed. ImageListener has only one method that needs to be implemented: onImageAvailable(Image). This method is called whenever library has available image for current processing step. Image is class that contains all information about available image, including buffer with image pixels. Image can be in several format and of several types. ImageFormat defines the pixel format of the image, while ImageType defines the type of the image. ImageListener interface extends android's Parcelable interface so it is possible to send implementations via intents.

Here is the example implementation of ImageListener interface. This implementation will save all images into folder myImages on device's external storage:

public class MyImageListener implements ImageListener {

   /**
    * Called when library has image available.
    */
    @Override
    public void onImageAvailable(Image image) {
        // we will save images to 'myImages' folder on external storage
        // image filenames will be 'imageType - currentTimestamp.jpg'
        String output = Environment.getExternalStorageDirectory().getAbsolutePath() + "/myImages";
        File f = new File(output);
        if(!f.exists()) {
            f.mkdirs();
        }
        DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd-HH-mm-ss");
        String dateString = dateFormat.format(new Date());
        String filename = null;
        switch(image.getImageFormat()) {
            case ALPHA_8: {
                filename = output + "/alpha_8 - " + image.getImageName() + " - " + dateString + ".jpg";
                break;
            }
            case BGRA_8888: {
                filename = output + "/bgra - " + image.getImageName() + " - " + dateString + ".jpg";
                break;
            }
            case YUV_NV21: {
                filename = output + "/yuv - " + image.getImageName()+ " - " + dateString + ".jpg";
                break;
            }
        }
        Bitmap b = image.convertToBitmap();
        FileOutputStream fos = null;
        try {
            fos = new FileOutputStream(filename);
            boolean success = b.compress(Bitmap.CompressFormat.JPEG, 100, fos);
            if(!success) {
                Log.e(this, "Failed to compress bitmap!");
                if(fos != null) {
                    try {
                        fos.close();
                    } catch (IOException ignored) {
                    } finally {
                        fos = null;
                    }
                    new File(filename).delete();
                }
            }
        } catch (FileNotFoundException e) {
            Log.e(this, e, "Failed to save image");
        } finally {
            if(fos != null) {
                try {
                    fos.close();
                } catch (IOException ignored) {
                }
            }
        }
        // after this line, image gets disposed. If you want to save it
        // for later, you need to clone it with image.clone()
    }

    /**
     * ImageListener interface extends Parcelable interface, so we also need to implement
     * that interface. The implementation of Parcelable interface is below this line.
     */

    @Override
    public int describeContents() {
        return 0;
    }

    @Override
    public void writeToParcel(Parcel dest, int flags) {
    }

    public static final Creator<MyImageListener> CREATOR = new Creator<MyImageListener>() {
        @Override
        public MyImageListener createFromParcel(Parcel source) {
            return new MyImageListener();
        }

        @Override
        public MyImageListener[] newArray(int size) {
            return new MyImageListener[size];
        }
    };
}

Note that ImageListener can only be given to ScanCard via Intent, while to RecognizerView, you need to give Metadata listener and Metadata settings that defines which metadata should be obtained. When you give ImageListener to ScanCard via Intent, it internally registers a MetadataListener that enables obtaining of all available image types and invokes ImageListener given via Intent with the result. For more information and examples how to use MetadataListener for obtaining images, refer to demo applications.

Recognition settings and results

This chapter will discuss various recognition settings used to configure different recognizers and scan results generated by them.

Recognition settings

Recognition settings define what will be scanned and how will the recognition process be performed. Here is the list of methods that are most relevant:

`setAllowMultipleScanResultsOnSingleImage(boolean)`

Sets whether or not outputting of multiple scan results from same image is allowed. If that is true, it is possible to return multiple recognition results produced by different recognizers from same image. However, single recognizer can still produce only a single result from single image. If this option is false, the array of BaseRecognitionResults will contain at most 1 element. The upside of setting that option to false is the speed - if you enable lots of recognizers, as soon as the first recognizer succeeds in scanning, recognition chain will be terminated and other recognizers will not get a chance to analyze the image. The downside is that you are then unable to obtain multiple results from different recognizers from single image. By default, this option is false.

`setNumMsBeforeTimeout(int)`

Sets the number of miliseconds BlinkID will attempt to perform the scan it exits with timeout error. On timeout returned array of BaseRecognitionResults inside RecognitionResults might be null, empty or may contain only elements that are not valid (isValid returns false) or are empty (isEmpty returns true).

NOTE: Please be aware that time counting does not start from the moment when scanning starts. Instead it starts from the moment when at least one BaseRecognitionResult becomes available which is neither empty nor valid.

The reason for this is the better user experience in cases when for example timeout is set to 10 seconds and user starts scanning and leaves device lying on table for 9 seconds and then points the device towards the object it wants to scan: in such case it is better to let that user scan the object it wants instead of completing scan with empty scan result as soon as 10 seconds timeout ticks out.

`setFrameQualityEstimationMode(FrameQualityEstimationMode)`

Sets the mode of the frame quality estimation. Frame quality estimation is the process of estimating the quality of video frame so only best quality frames can be chosen for processing so no time is wasted on processing frames that are of too poor quality to contain any meaningful information. It is not used when performing recognition of Android bitmaps using Direct API. You can choose 3 different frame quality estimation modes: automatic, always on and always off.

In automatic mode (default), frame quality estimation will be used if device contains multiple processor cores or if on single core device at least one active recognizer requires frame quality estimation.
In always on mode, frame quality estimation will be used always, regardless of device or active recognizers.
In always off mode, frame quality estimation will be always disabled, regardless of device or active recognizers. This is not recommended setting because it can significantly decrease quality of the scanning process.

`setRecognizerSettingsArray(RecognizerSettings[])`

Sets the array of RecognizerSettings that will define which recognizers should be activated and how should the be set up. The list of available RecognizerSettings and their specifics are given below.

Scanning machine-readable travel documents

This section discusses the setting up of machine-readable travel documents(MRTD) recognizer and obtaining results from it.

Setting up machine-readable travel documents recognizer

To activate MRTD recognizer, you need to create MRTDRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
    MRTDRecognizerSettings sett = new MRTDRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

MRTDRecognizerSettings has following methods for tweaking the recognition:

`setAllowUnparsedResults(boolean)`

Set this to true to allow obtaining results that have not been parsed by SDK. By default this is off. The reason for this is that we want to ensure best possible data quality when returning results. For that matter we internally parse the MRZ and extract all data, taking all possible OCR mistakes into account. However, if you happen to have a document with MRZ that has format our internal parser still does not support, you need to allow returning of unparsed results. Unparsed results will not contain parsed data, but will contain OCR result received from OCR engine, so you can parse data yourself.

`setAllowUnverifiedResults(boolean)`

Set this to true to allow obtaining of results with incorrect check digits. This flag will be taken into account only if Machine Readable Zone has been successfully parsed because only in that case check digits can be examined.

`setShowMRZ(boolean)`

Set this to true if you use MetadataListener and you want to obtain image containing only Machine Readable Zone. The reported ImageType will be DEWARPED and image name will be "MRZ". You will also need to enable obtaining of dewarped images in MetadataSettings. By default, this is turned off.

`setShowFullDocument(boolean)`

Set this to true if you use MetadataListener and you want to obtain image containing full document containing Machine Readable Zone. The document image's orientation will be corrected. The reported ImageType will be DEWARPED and image name will be "MRTD". You will also need to enable obtaining of dewarped images in MetadataSettings. By default, this is turned off.

`setFullDocumentImageDPI(int)`

Use this method to set desired DPI (Dots Per Inch) in range [100, 400] for full document image which is returned by this recognizer.

`setMRZFilter(MRZFilter)`

Sets the MRZFilter that will be used for filtering MRTD documents based on the MRZ zone result. MRZ filter should be used if only specific MRTD documents should be processed. Only recognition results from documents that are allowed by this filter can be returned.

`void setMRTDSpecifications(MRTDSpecification[])`

Sets array of specifications for MRTD documents that can be detected. Array must contain at least one element and at most three elements. Detection is limited only to document type specified with MRTDSpecification. When MRTDSpecifications are set, results will be returned only for specified MRTD documents. MRTDSpecification can be created by using MRTDSpecification.createFromPreset method.

Extracting additional fields of interest from machine-readable travel documents (Templating API)

If MRTD document contains additional fields of interest that should be extracted together with information from machine readable zone (MRZ), you can achieve this by specifying the locations of this fields relative to full document detection and choosing appropriate parsers that will be used to extract data from them. Additionally, it is possible to support multiple document types containing the MRZ zone (e.g. different versions of the ID card). To achieve this, document classifier, which classify the document based on the MRZ result and fields set with void setParserDecodingInfos(DecodingInfo[]), should be implemented and provided to the MRTD recognizer and locations of additional fields should be defined for each document type, as separate location sets.

Following methods in MRTDRecognizerSettings are available for tweaking the recognition of additional fields:

`void addParser(String, OcrParserSettings)`

Adds parser with given name and parser settings to default parser group. Parser settings determine the parser that will be used.

`void addParserToParserGroup(String, String, OcrParserSettings)`

Adds parser with given name and parser settings to chosen parser group. Parser settings determine the parser that will be used.

`void setParserDecodingInfos(DecodingInfo[])`

Sets the decoding infos for desired additional document elements that should be recognized together with MRZ zone. Use this method if document contains additional information (elements) of interest that should be recognized together with MRZ and only one document type is expected or if later document classification depends on non-MRZ data. The position of each additional element is represented as DecodingInfo object which holds the location for that element of interest (relative to full document detection) and the desired dewarp height (in number of pixels), for that location. Name of the decoding info must be equal to the name of the parser group that will be used for parsing that element.

If you want to support multiple document types containing MRZ, and if they can be distinguished using MRZ result and non-MRZ fields set with this method, use method setParserDecodingInfos(DecodingInfo[], String) for setting the decoding infos for each document type and method setDocumentClassifier(MRTDDocumentClassifier) for setting the document classifier.

`void setParserDecodingInfos(DecodingInfo[], String)`

Sets the named decoding info set, for specific document type, whose elements contain location information about additional document elements that should be recognized together with the MRZ zone. Use this method if document contains additional information (elements) of interest that should be recognized together with MRZ zone and there are multiple document types that can be distinguished using the MRZ result. The position of each additional element is represented as DecodingInfo object which holds the location for that element of interest (relative to full document detection) and the desired dewarp height (in number of pixels), for that location. Name of the decoding info must be equal to the name of the parser group that will be used for parsing that element. Additionally, for document classification, set the document classifier using the method setDocumentClassifier(MRTDDocumentClassifier).

`void setDocumentClassifier(MRTDDocumentClassifier)`

Sets the MRTD document classifier that can be used for classification of the documents based on the MRZ zone result. This method should be used if multiple MRTD document types are expected and additional information (elements) of interest should be recognized. In addition, decoding infos for each document type should be set with setParserDecodingInfos(DecodingInfo[], String) method. For each document type, name of the decoding info set must be equal to the corresponding classifier result.

Implementing the MRTDDocumentClassifier

MRTDDocumentClassifier is interface that should be implemented to support the classification of MRTD documents based on data extracted from the MRZ zone and non-MRZ fields defined with void setParserDecodingInfos(DecodingInfo[]). Classifier is used to determine which set of decoding infos will be used to extract non-MRZ data. This interface extends the Parcelable interface and the parcelization should be implemented. Besides that, following method has to be implemented:

`String classifyDocument(MRTDRecognitionResult)`

Based on MRTDRecognitionResult classifies the MRTD document. For each MRTD document type that you want to support, returned result string has to be equal to the name of the corresponding set of DecodingInfo objects which are defined for that document type. Named decoding info sets should be defined using setParserDecodingInfos(DecodingInfo[], String) method.

Obtaining results from machine-readable travel documents recognizer

MRTD recognizer produces MRTDRecognitionResult. You can use instanceof operator to check if element in results array is instance of MRTDRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof MRTDRecognitionResult) {
            MRTDRecognitionResult result = (MRTDRecognitionResult) baseResult;
            
            // you can use getters of MRTDRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if(result.isMRZParsed()) {
                    String primaryId = result.getPrimaryId();
                    String secondaryId = result.getSecondaryId();
                    String documentNumber = result.getDocumentNumber();
                } else {
                    OcrResult rawOcr = result.getOcrResult();
                    // attempt to parse OCR result by yourself
                    // or ask user to try again
                }
                // If additional fields of interest are expected, obtain
                // results here. Here we assume that each parser is the only parser in its
                // group, and parser name is equal to the group name.
                // e.g. we have member variable
                // private String[] mParserNames = new String[]{address, dateOfBirth};
                for (String parserName : mParserNames) {
                    // use getParsedResult(String parserGroupName, String parserName)
                    String groupName = parserName;
                    String parsedResult = result.getParsedResult(groupName, parserName);
                    // check whether parsing was successfull (parsedResult is not null nor empty)
                    if (parsedResult != null && !parsedResult.isEmpty()) {
                        // do something with the result
                    } else {
                        // you can read unparsed raw ocr result if parsing was unsuccessful
                        // use getOcrResult(String parserGroupName)
                        String ocrResult = result.getOcrResult(groupName);
                        // attempt to parse OCR result by yourself
                    }
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are:

`boolean isValid()`

Returns true if scan result is valid, i.e. if all required elements were scanned with good confidence and can be used. If false is returned that indicates that some crucial data fields are missing. You should ask user to try scanning again. If you keep getting false (i.e. invalid data) for certain document, please report that as a bug to help.microblink.com. Please include high resolution photographs of problematic documents.

`boolean isEmpty()`

Returns true if scan result is empty, i.e. nothing was scanned. All getters should return null for empty result.

`String getPrimaryId()`

Returns the primary identifier. If there is more than one component, they are separated with space.

`String getSecondaryId()`

Returns the secondary identifier. If there is more than one component, they are separated with space.

`String getIssuer()`

Returns three-letter or two-letter code which indicate the issuing State. Three-letter codes are based on Alpha-3 codes for entities specified in ISO 3166-1, with extensions for certain States. Two-letter codes are based on Alpha-2 codes for entities specified in ISO 3166-1, with extensions for certain States.

`Date getDateOfBirth()`

Returns holder's date of birth if it is successfully converted to Date from MRZ date format: YYMMDD or null if date is unknown or can not be converted to Date.

`String getRawDateOfBirth()`

Returns holder's date of birth as raw string from MRZ zone in format YYMMDD.

`String getDocumentNumber()`

Returns document number. Document number contains up to 9 characters.

`String getNationality()`

Returns nationality of the holder represented by a three-letter or two-letter code. Three-letter codes are based on Alpha-3 codes for entities specified in ISO 3166-1, with extensions for certain States. Two-letter codes are based on Alpha-2 codes for entities specified in ISO 3166-1, with extensions for certain States.

`String getSex()`

Returns sex of the card holder. Sex is specified by use of the single initial, capital letter F for female, M for male or < for unspecified.

`String getDocumentCode()`

Returns document code. Document code contains two characters. For MRTD the first character shall be A, C or I. The second character shall be discretion of the issuing State or organization except that V shall not be used, and C shall not be used after A except in the crew member certificate. On machine-readable passports (MRP) first character shall be P to designate an MRP. One additional letter may be used, at the discretion of the issuing State or organization, to designate a particular MRP. If the second character position is not used for this purpose, it shall be filled by the filter character <.

`Date getDateOfExpiry()`

Returns date of expiry if it is successfully converted to Date from MRZ date format: YYMMDD or null if date is unknown or can not be converted to Date.

`String getRawDateOfExpiry()`

Returns date of expiry as raw string from MRZ zone in format YYMMDD.

`String getOpt1()`

Returns first optional data. Returns null or empty string if not available.

`String getOpt2()`

Returns second optional data. Returns null or empty string if not available.

`String getMRZText()`

Returns the entire Machine Readable Zone text from ID. This text is usually used for parsing other elements.

`boolean isMRZParsed()`

Returns true if Machine Readable Zone has been parsed, false otherwise. false can only be returned if in settings object you called setAllowUnparsedResults(true). If Machine Readable Zone has not been parsed, you can still obtain OCR result with getOcrResult() and attempt to parse it yourself.

`boolean isMRZVerified()`

Returns true if all check digits inside MRZ are correct, false otherwise.

`OcrResult getOcrResult()`

Returns the raw OCR result that was used for parsing data. If isMRZParsed() returns false, you can use OCR result to parse data by yourself.

Getters for obtaining results of additional fields of interest:

`String getParsedResult(String)`

Returns the result of parser with the given name from default parsing group. If parsing has failed, returns null or empty string.

`String getParsedResult(String, String)`

Returns the result of parser in given parser group, with the given parser name. If parsing has failed, returns null or empty string.

`OcrResult getOcrResult(String)`

Returns the OCR result for given parser group. If there is no OCR result for requested parser group, returns null.

Scanning and combining face image and MRZ results from MRTD documents

This section will discuss the setting up of MRTD Combined Recognizer and obtaining results from it. This recognizer can be used for obtaining face image from the document and MRZ scan result in two steps. First, face image should be scanned and then recognizer initializes itself for scanning the machine readable zone (MRZ).

Setting up MRTD combined recognizer

To activate MRTD combined recognizer, you need to create MRTDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    MRTDCombinedRecognizerSettings sett = new MRTDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of MRTDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the face image is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to scan the machine readable zone (MRZ). See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof DocumentFaceRecognitionResult) {
            // notify user to scan the MRZ  
        }
    }
}

Obtaining results from MRTD combined recognizer

MRTD combined recognizer produces MRTDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of MRTDCombinedRecognitionResult class.

Note: MRTDCombinedRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof MRTDCombinedRecognitionResult) {
            MRTDCombinedRecognitionResult result = (MRTDCombinedRecognitionResult) baseResult;
            
            // you can use getters of MRTDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // face and MRZ are not from the same document
                } else {
                    String issuer = result.getIssuer();
                    String documentNumber = result.getDocumentNumber();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Austrian ID documents

This section will discuss the setting up of Austrian ID Front Side recognizer and obtaining results from it.

Setting up Austrian ID card front side recognizer

To activate Austrian ID front side recognizer, you need to create AustrianIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	AustrianIDFrontSideRecognizerSettings sett = new AustrianIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustrianIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Austrian ID card front side recognizer

Austrian ID front side recognizer produces AustrianIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustrianIDFrontSideRecognitionResult class.

Note: AustrianIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof AustrianIDFrontSideRecognitionResult) {
			AustrianIDFrontSideRecognitionResult result = (AustrianIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of CroatianIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Austrian ID documents

This section will discuss the setting up of Austrian ID Back Side recognizer and obtaining results from it.

Setting up Austrian ID card back side recognizer

To activate Austrian ID back side recognizer, you need to create AustrianIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	AustrianIDBackSideRecognizerSettings sett = new AustrianIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustrianIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Austrian ID card back side recognizer

Austrian ID back side recognizer produces AustrianIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustrianIDBackSideRecognitionResult class.

Note: AustrianIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof AustrianIDBackSideRecognitionResult) {
			AustrianIDBackSideRecognitionResult result = (AustrianIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of AustrianIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String placeOfBirth = result.getPlaceOfBirth();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Austrian ID documents

This section will discuss the setting up of Austrian ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Austrian ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Austrian ID card combined recognizer

To activate Austrian ID combined recognizer, you need to create AustrianIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    AustrianIDCombinedRecognizerSettings sett = new AustrianIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustrianIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof AustrianIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Austrian ID card combined recognizer

Austrian ID combined recognizer produces AustrianIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustrianIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof AustrianIDCombinedRecognitionResult) {
            AustrianIDCombinedRecognitionResult result = (AustrianIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of AustrianIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning Austrian passports

This section will discuss the setting up of Austrian passport recognizer and obtaining results from it.

Setting up Austrian passport recognizer

To activate Austrian passport recognizer, you need to create AustrianPassportRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	AustrianPassportRecognizerSettings sett = new AustrianPassportRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustrianPassportRecognizerSettings. Check Javadoc for more information.

Obtaining results from Austrian passport recognizer

Austrian passport recognizer produces AustrianPassportRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustrianPassportRecognitionResult class.

Note: AustrianPassportRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof AustrianPassportRecognitionResult) {
			AustrianPassportRecognitionResult result = (AustrianPassportRecognitionResult) baseResult;
			
	        // you can use getters of AustrianPassportRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String placeOfBirth = result.getPlaceOfBirth();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Colombian ID documents

This section will discuss the setting up of Colombian ID Front Side recognizer and obtaining results from it.

Setting up Colombian ID card front side recognizer

To activate Colombian ID front side recognizer, you need to create ColombiaIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	ColombiaIDFrontRecognizerSettings sett = new ColombiaIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of ColombiaIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Colombian ID card front side recognizer

Colombian ID front side recognizer produces ColombiaIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of ColombiaIDFrontRecognitionResult class.

Note: ColombiaIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof ColombiaIDFrontRecognitionResult) {
			ColombiaIDFrontRecognitionResult result = (ColombiaIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of ColombiaIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getOwnerFirsName();
				String lastName = result.getOwnerLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Colombian ID documents

This section will discuss the setting up of Colombian ID Back Side recognizer and obtaining results from it.

Setting up Colombian ID card back side recognizer

To activate Colombian ID back side recognizer, you need to create ColombiaIDBackRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	ColombiaIDBackRecognizerSettings sett = new ColombiaIDBackRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of ColombiaIDBackRecognizerSettings. Check Javadoc for more information.

Obtaining results from Colombian ID card back side recognizer

Colombian ID back side recognizer produces ColombiaIDBackRecognitionResult. You can use instanceof operator to check if element in results array is instance of ColombiaIDBackRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof ColombiaIDBackRecognitionResult) {
			ColombiaIDBackRecognitionResult result = (ColombiaIDBackRecognitionResult) baseResult;
			
	        // you can use getters of ColombiaIDBackRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String documentNumber = result.getDocumentNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Croatian ID documents

This section will discuss the setting up of Croatian ID Front Side recognizer and obtaining results from it.

Setting up Croatian ID card front side recognizer

To activate Croatian ID front side recognizer, you need to create CroatianIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	CroatianIDFrontSideRecognizerSettings sett = new CroatianIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CroatianIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Croatian ID card front side recognizer

Croatian ID front side recognizer produces CroatianIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of CroatianIDFrontSideRecognitionResult class.

Note: CroatianIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof CroatianIDFrontSideRecognitionResult) {
			CroatianIDFrontSideRecognitionResult result = (CroatianIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of CroatianIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Croatian ID documents

This section will discuss the setting up of Croatian ID Back Side recognizer and obtaining results from it.

Setting up Croatian ID card back side recognizer

To activate Croatian ID back side recognizer, you need to create CroatianIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	CroatianIDBackSideRecognizerSettings sett = new CroatianIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CroatianIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Croatian ID card back side recognizer

Croatian ID back side recognizer produces CroatianIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of CroatianIDBackSideRecognitionResult class.

Note: CroatianIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof CroatianIDFrontSideRecognitionResult) {
			CroatianIDBackSideRecognitionResult result = (CroatianIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of CroatianIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String address = result.getAddress();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Croatian ID documents

This section will discuss the setting up of Croatian ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Croatian ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Croatian ID card combined recognizer

To activate Croatian ID combined recognizer, you need to create CroatianIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    CroatianIDCombinedRecognizerSettings sett = new CroatianIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CroatianIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof CroatianIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Croatian ID card combined recognizer

Croatian ID combined recognizer produces CroatianIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of CroatianIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof CroatianIDCombinedRecognitionResult) {
            CroatianIDCombinedRecognitionResult result = (CroatianIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of CroatianIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Czech ID documents

This section will discuss the setting up of Czech ID Front Side recognizer and obtaining results from it.

Setting up Czech ID card front side recognizer

To activate Czech ID front side recognizer, you need to create CzechIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	CzechIDFrontSideRecognizerSettings sett = new CzechIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CzechIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Czech ID card front side recognizer

Czech ID front side recognizer produces CzechIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of CzechIDFrontSideRecognitionResult class.

Note: CzechIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof CzechIDFrontSideRecognitionResult) {
			CzechIDFrontSideRecognitionResult result = (CzechIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of CzechIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Czech ID documents

This section will discuss the setting up of Czech ID Back Side recognizer and obtaining results from it.

Setting up Czech ID card back side recognizer

To activate Czech ID back side recognizer, you need to create CzechIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	CzechIDBackSideRecognizerSettings sett = new CzechIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CzechIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Czech ID card back side recognizer

Czech ID back side recognizer produces CzechIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of CzechIDBackSideRecognitionResult class.

Note: CzechIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof CzechIDFrontSideRecognitionResult) {
			CzechIDBackSideRecognitionResult result = (CzechIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of CzechIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String address = result.getAddress();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Czech ID documents

This section will discuss the setting up of Czech ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Czech ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Czech ID card combined recognizer

To activate Czech ID combined recognizer, you need to create CzechIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    CzechIDCombinedRecognizerSettings sett = new CzechIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of CzechIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof CzechIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Czech ID card combined recognizer

Czech ID combined recognizer produces CzechIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of CzechIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof CzechIDCombinedRecognitionResult) {
            CzechIDCombinedRecognitionResult result = (CzechIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of CzechIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of German ID documents

This section will discuss the setting up of German ID Front Side recognizer and obtaining results from it.

Setting up German ID card front side recognizer

To activate German ID front side recognizer, you need to create GermanIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	GermanIDFrontSideRecognizerSettings sett = new GermanIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of GermanIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from German ID card front side recognizer

German ID front side recognizer produces GermanIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of GermanIDFrontSideRecognitionResult class.

Note: GermanIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof GermanIDFrontSideRecognitionResult) {
			GermanIDFrontSideRecognitionResult result = (GermanIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of GermanIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Egypt ID documents

This section will discuss the setting up of Egypt ID Front Side recognizer and obtaining results from it.

Setting up Egypt ID card front side recognizer

To activate Egypt ID front side recognizer, you need to create EgyptIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	EgyptIDFrontRecognizerSettings sett = new EgyptIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of EgyptIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Egypt ID card front side recognizer

Egypt ID front side recognizer produces EgyptIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of EgyptIDFrontRecognitionResult class.

Note: EgyptIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof EgyptIDFrontRecognitionResult) {
			EgyptIDFrontRecognitionResult result = (EgyptIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of EgyptIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String documentNumber = result.getDocumentNumber();
				String nationalNumber = result.getNatianalNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of German ID documents

This section will discuss the setting up of German ID Back Side recognizer and obtaining results from it.

Setting up German ID card back side recognizer

To activate German ID back side recognizer, you need to create GermanIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	GermanIDBackSideRecognizerSettings sett = new GermanIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of GermanIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from German ID card back side recognizer

German ID back side recognizer produces GermanIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of GermanIDBackSideRecognitionResult class.

Note: GermanIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof GermanIDBackSideRecognitionResult) {
			GermanIDBackSideRecognitionResult result = (GermanIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of GermanIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String address = result.getAddress();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of the older German ID documents

This section will discuss the setting up of German ID recognizer for older cards (issued between 1 April 1987 and 31 October 2010) and obtaining results from it.

Setting up German ID card recognizer for the front side of the older card

To activate German old ID card recognizer, you need to create GermanOldIDRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	GermanOldIDRecognizerSettings sett = new GermanOldIDRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of GermanOldIDRecognizerSettings. Check Javadoc for more information.

Obtaining results from German old ID card recognizer

German old ID recognizer produces GermanOldIDRecognitionResult. You can use instanceof operator to check if element in results array is instance of GermanOldIDRecognitionResult class.

Note: GermanOldIDRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof GermanOldIDRecognitionResult) {
			GermanOldIDRecognitionResult result = (GermanOldIDRecognitionResult) baseResult;
			
	        // you can use getters of GermanOldIDRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String placeOfBirth = result.getPlaceOfBirth();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning German passports

This section will discuss the setting up of German passport recognizer and obtaining results from it.

Setting up German passport recognizer

To activate German passport recognizer, you need to create GermanPassportRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	GermanPassportRecognizerSettings sett = new GermanPassportRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of GermanPassportRecognizerSettings. Check Javadoc for more information.

Obtaining results from German passport recognizer

German passport recognizer produces GermanPassportRecognitionResult. You can use instanceof operator to check if element in results array is instance of GermanPassportRecognitionResult class.

Note: GermanPassportRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof GermanPassportRecognitionResult) {
			GermanPassportRecognitionResult result = (GermanPassportRecognitionResult) baseResult;
			
	        // you can use getters of GermanPassportRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String surname = result.getSurname();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Hong Kong ID documents

This section will discuss the setting up of Hong Kong ID Front Side recognizer and obtaining results from it.

Setting up Hong Kong ID card front side recognizer

To activate Hong Kong ID front side recognizer, you need to create HongKongIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	HongKongIDFrontRecognizerSettings sett = new HongKongIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of HongKongIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Hong Kong ID card front side recognizer

Hong Kong ID front side recognizer produces HongKongIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of HongKongIDFrontRecognitionResult class.

Note: HongKongIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof HongKongIDFrontRecognitionResult) {
			HongKongIDFrontRecognitionResult result = (HongKongIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of HongKongIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String fullName = result.getOwnerFullName();
				String sex = result.getOwnerSex();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Indonesian ID documents

This section will discuss the setting up of Indonesian ID Front Side recognizer and obtaining results from it.

Setting up Indonesian ID card front side recognizer

To activate Indonesian ID front side recognizer, you need to create IndonesianIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	IndonesianIDFrontRecognizerSettings sett = new IndonesianIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of IndonesianIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Indonesian ID card front side recognizer

Indonesian ID front side recognizer produces IndonesianIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of IndonesianIDFrontRecognitionResult class.

Note: IndonesianIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof IndonesianIDFrontRecognitionResult) {
			IndonesianIDFrontRecognitionResult result = (IndonesianIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of IndonesianIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String placeOfBirth = result.getPlaceOfBirth();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Jordan ID documents

This section will discuss the setting up of Jordan ID Front Side recognizer and obtaining results from it.

Setting up Jordan ID card front side recognizer

To activate Jordan ID front side recognizer, you need to create JordanIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	JordanIDFrontRecognizerSettings sett = new JordanIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of JordanIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Jordan ID card front side recognizer

Jordan ID front side recognizer produces JordanIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of JordanIDFrontRecognitionResult class.

Note: JordanIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof JordanIDFrontRecognitionResult) {
			JordanIDFrontRecognitionResult result = (JordanIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of JordanIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String nationalNumber = result.getNatianalNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Jordan ID documents

This section will discuss the setting up of Jordan ID Back Side recognizer and obtaining results from it.

Setting up Jordan ID card back side recognizer

To activate Jordan ID back side recognizer, you need to create JordanIDBackRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	JordanIDBackRecognizerSettings sett = new JordanIDBackRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of JordanIDBackRecognizerSettings. Check Javadoc for more information.

Obtaining results from Jordan ID card back side recognizer

Jordan ID back side recognizer produces JordanIDBackRecognitionResult. You can use instanceof operator to check if element in results array is instance of JordanIDBackRecognitionResult class.

Note: JordanIDBackRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof JordanIDBackRecognitionResult) {
			JordanIDBackRecognitionResult result = (JordanIDBackRecognitionResult) baseResult;
			
	        // you can use getters of JordanIDBackRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String documentNumber = result.getDocumentNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Jordan ID documents

This section will discuss the setting up of Jordan ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Jordan ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Jordan ID card combined recognizer

To activate Jordan ID combined recognizer, you need to create JordanIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    JordanIDCombinedRecognizerSettings sett = new JordanIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of JordanIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof JordanIDCombinedRecognizerSettings) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Jordan ID card combined recognizer

Jordan ID combined recognizer produces JordanIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of JordanIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof JordanIDCombinedRecognitionResult) {
            JordanIDCombinedRecognitionResult result = (JordanIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of JordanIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String nationalNumber = result.getNatianalNumber();
                    String name = result.getName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Polish ID documents

This section will discuss the setting up of Polish ID Front Side recognizer and obtaining results from it.

Setting up Polish ID card front side recognizer

To activate Polish ID front side recognizer, you need to create PolishIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	PolishIDFrontSideRecognizerSettings sett = new PolishIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of PolishIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Polish ID card front side recognizer

Polish ID front side recognizer produces PolishIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of PolishIDFrontSideRecognitionResult class.

Note: PolishIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof PolishIDFrontSideRecognitionResult) {
			PolishIDFrontSideRecognitionResult result = (PolishIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of PolishIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String givenNames = result.getGivenNames();
				String surname = result.getSurname();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Polish ID documents

This section will discuss the setting up of Polish ID Back Side recognizer and obtaining results from it.

Setting up Polish ID card back side recognizer

To activate Polish ID back side recognizer, you need to create PolishIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	PolishIDBackSideRecognizerSettings sett = new PolishIDBackSideRecognizerSettings();

	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of PolishIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Polish ID card back side recognizer

Polish ID back side recognizer produces PolishIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of PolishIDBackSideRecognitionResult class.

Note: PolishIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof PolishIDBackSideRecognitionResult) {
			PolishIDBackSideRecognitionResult result = (PolishIDBackSideRecognitionResult) baseResult;

	        // you can use getters of PolishIDBackSideRecognitionResult class to
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String documentNumber = result.getDocumentNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Polish ID documents

This section will discuss the setting up of Polish ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Polish ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Polish ID card combined recognizer

To activate Polish ID combined recognizer, you need to create PolishIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    PolishIDCombinedRecognizerSettings sett = new PolishIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of PolishIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof PolishIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Polish ID card combined recognizer

Polish ID combined recognizer produces PolishIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of PolishIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof PolishIDCombinedRecognitionResult) {
            PolishIDCombinedRecognitionResult result = (PolishIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of PolishIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String givenNames = result.getGivenNames();
                    String surname = result.getSurname();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Serbian ID documents

This section will discuss the setting up of Serbian ID Front Side recognizer and obtaining results from it.

Setting up Serbian ID card front side recognizer

To activate Serbian ID front side recognizer, you need to create SerbianIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SerbianIDFrontSideRecognizerSettings sett = new SerbianIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SerbianIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Serbian ID card front side recognizer

Serbian ID front side recognizer produces SerbianIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SerbianIDFrontSideRecognitionResult class.

Note: SerbianIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SerbianIDFrontSideRecognitionResult) {
			SerbianIDFrontSideRecognitionResult result = (SerbianIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of SerbianIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String documentNumber = result.getDocumentNumber();
				Date issuingDate = result.getIssuingDate();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Serbian ID documents

This section will discuss the setting up of Serbian ID Back Side recognizer and obtaining results from it.

Setting up Serbian ID card back side recognizer

To activate Serbian ID back side recognizer, you need to create SerbianIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SerbianIDBackSideRecognizerSettings sett = new SerbianIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SerbianIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Serbian ID card back side recognizer

Serbian ID back side recognizer produces SerbianIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SerbianIDBackSideRecognitionResult class.

Note: SerbianIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SerbianIDBackSideRecognitionResult) {
			SerbianIDBackSideRecognitionResult result = (SerbianIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of SerbianIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				Date birthDate = result.getDateOfBirth()
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Serbian ID documents

This section will discuss the setting up of Serbian ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Serbian ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Serbian ID card combined recognizer

To activate Serbian ID combined recognizer, you need to create SerbianIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    SerbianIDCombinedRecognizerSettings sett = new SerbianIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SerbianIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof SerbianIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Serbian ID card combined recognizer

Serbian ID combined recognizer produces SerbianIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of SerbianIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof SerbianIDCombinedRecognitionResult) {
            SerbianIDCombinedRecognitionResult result = (SerbianIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of SerbianIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Slovak ID documents

This section will discuss the setting up of Slovak ID Front Side recognizer and obtaining results from it.

Setting up Slovak ID card front side recognizer

To activate Slovak ID front side recognizer, you need to create SlovakIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SlovakIDFrontSideRecognizerSettings sett = new SlovakIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovakIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Slovak ID card front side recognizer

Slovak ID front side recognizer produces SlovakIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovakIDFrontSideRecognitionResult class.

Note: SlovakIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SlovakIDFrontSideRecognitionResult) {
			SlovakIDFrontSideRecognitionResult result = (SlovakIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of SlovakIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Slovak ID documents

This section will discuss the setting up of Slovak ID Back Side recognizer and obtaining results from it.

Setting up Slovak ID card back side recognizer

To activate Slovak ID back side recognizer, you need to create SlovakIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SlovakIDBackSideRecognizerSettings sett = new SlovakIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovakIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Slovak ID card back side recognizer

Slovak ID back side recognizer produces SlovakIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovakIDBackSideRecognitionResult class.

Note: SlovakIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SlovakIDBackSideRecognitionResult) {
			SlovakIDBackSideRecognitionResult result = (SlovakIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of SlovakIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String address = result.getAddress();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Slovak ID documents

This section will discuss the setting up of Slovak ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Slovak ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Slovak ID card combined recognizer

To activate Slovak ID combined recognizer, you need to create SlovakIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    SlovakIDCombinedRecognizerSettings sett = new SlovakIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovakIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof SlovakIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Slovak ID card combined recognizer

Slovak ID combined recognizer produces SlovakIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovakIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof SlovakIDCombinedRecognitionResult) {
            SlovakIDCombinedRecognitionResult result = (SlovakIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of SlovakIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Slovenian ID documents

This section will discuss the setting up of Slovenian ID Front Side recognizer and obtaining results from it.

Setting up Slovenian ID card front side recognizer

To activate Slovenian ID front side recognizer, you need to create SlovenianIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SlovenianIDFrontSideRecognizerSettings sett = new SlovenianIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovenianIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Slovenian ID card front side recognizer

Slovenian ID front side recognizer produces SlovenianIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovenianIDFrontSideRecognitionResult class.

Note: SlovenianIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SlovenianIDFrontSideRecognitionResult) {
			SlovenianIDFrontSideRecognitionResult result = (SlovenianIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of SlovenianIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				Date dateOfExpiry = result.getDateOfExpiry();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Slovenian ID documents

This section will discuss the setting up of Slovenian ID Back Side recognizer and obtaining results from it.

Setting up Slovenian ID card back side recognizer

To activate Slovenian ID back side recognizer, you need to create SlovenianIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SlovenianIDBackSideRecognizerSettings sett = new SlovenianIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovenianIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Slovenian ID card back side recognizer

Slovenian ID back side recognizer produces SlovenianIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovenianIDBackSideRecognitionResult class.

Note: SlovenianIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SlovenianIDBackSideRecognitionResult) {
			SlovenianIDBackSideRecognitionResult result = (SlovenianIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of SlovenianIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				Date birthDate = result.getDateOfBirth()
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Slovenian ID documents

This section will discuss the setting up of Slovenian ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Slovenian ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Slovenian ID card combined recognizer

To activate Slovenian ID combined recognizer, you need to create SlovenianIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    SlovenianIDCombinedRecognizerSettings sett = new SlovenianIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SlovenianIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof SlovenianIDFrontSideRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Slovenian ID card combined recognizer

Slovenian ID combined recognizer produces SlovenianIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of SlovenianIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof SlovenianIDCombinedRecognitionResult) {
            SlovenianIDCombinedRecognitionResult result = (SlovenianIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of SlovenianIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String firstName = result.getFirstName();
                    String lastName = result.getLastName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of Swiss ID documents

This section will discuss the setting up of Swiss ID Front Side recognizer and obtaining results from it.

Setting up Swiss ID card front side recognizer

To activate Swiss ID front side recognizer, you need to create SwissIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SwissIDFrontSideRecognizerSettings sett = new SwissIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SwissIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Swiss ID card front side recognizer

Swiss ID front side recognizer produces SwissIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SwissIDFrontSideRecognitionResult class.

Note: SwissIDFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SwissIDFrontSideRecognitionResult) {
			SwissIDFrontSideRecognitionResult result = (SwissIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of SwissIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				Date dateOfBirth = result.getDateOfBirth();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Swiss ID documents

This section will discuss the setting up of Swiss ID Back Side recognizer and obtaining results from it.

Setting up Swiss ID card back side recognizer

To activate Swiss ID card back side recognizer, you need to create SwissIDBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SwissIDBackSideRecognizerSettings sett = new SwissIDBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SwissIDBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Swiss ID card back side recognizer

Swiss ID back side recognizer produces SwissIDBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of SwissIDBackSideRecognitionResult class.

Note: SwissIDBackSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SwissIDBackSideRecognitionResult) {
			SwissIDBackSideRecognitionResult result = (SwissIDBackSideRecognitionResult) baseResult;
			
	        // you can use getters of SwissIDBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String placeOfOrigin = result.getPlaceOfOrigin();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning Swiss passports

This section will discuss the setting up of Swiss passport recognizer and obtaining results from it.

Setting up Swiss passport recognizer

To activate Swiss passport recognizer, you need to create SwissPassportRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SwissPassportRecognizerSettings sett = new SwissPassportRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SwissPassportRecognizerSettings. Check Javadoc for more information.

Obtaining results from Swiss passport recognizer

Swiss passport recognizer produces SwissPassportRecognitionResult. You can use instanceof operator to check if element in results array is instance of SwissPassportRecognitionResult class.

Note: SwissPassportRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SwissPassportRecognitionResult) {
			SwissPassportRecognitionResult result = (SwissPassportRecognitionResult) baseResult;
			
	        // you can use getters of AustrianPassportRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String placeOfOrigin = result.getPlaceOfOrigin();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Romanian ID documents

This section will discuss the setting up of Romanian ID Front Side recognizer and obtaining results from it.

Setting up Romanian ID card front side recognizer

To activate Romanian ID front side recognizer, you need to create RomanianIDFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	RomanianIDFrontSideRecognizerSettings sett = new RomanianIDFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of RomanianIDFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Romanian ID card front side recognizer

Romanian ID front side recognizer produces RomanianIDFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of RomanianIDFrontSideRecognitionResult class.

Note: RomanianIDFrontSideRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof RomanianIDFrontSideRecognitionResult) {
			RomanianIDFrontSideRecognitionResult result = (RomanianIDFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of RomanianIDFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getFirstName();
				String lastName = result.getLastName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning US Driver's licence barcodes

This section discusses the settings for setting up USDL recognizer and explains how to obtain results from it.

Setting up USDL recognizer

To activate USDL recognizer, you need to create USDLRecognizerSettings and add it to RecognizerSettings array. You can do this using following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	USDLRecognizerSettings sett = new USDLRecognizerSettings();
	// disallow scanning of barcodes that have invalid checksum
	sett.setUncertainScanning(false);
	// disable scanning of barcodes that do not have quiet zone
	// as defined by the standard
	sett.setNullQuietZoneAllowed(false);
       
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

As can be seen from example, you can tweak USDL recognition parameters with methods of USDLRecognizerSettings.

`setUncertainScanning(boolean)`

By setting this to true, you will enable scanning of non-standard elements, but there is no guarantee that all data will be read. This option is used when multiple rows are missing (e.g. not whole barcode is printed). Default is false.

`setNullQuietZoneAllowed(boolean)`

By setting this to true, you will allow scanning barcodes which don't have quiet zone surrounding it (e.g. text concatenated with barcode). This option can significantly increase recognition time. Default is true.

Obtaining results from USDL recognizer

USDL recognizer produces USDLScanResult. You can use instanceof operator to check if element in results array is instance of USDLScanResult. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof USDLScanResult) {
			USDLScanResult result = (USDLScanResult) baseResult;
			
	        // getStringData getter will return the string version of barcode contents (not parsed)
			String barcodeData = result.getStringData();
			// isUncertain getter will tell you if scanned barcode is uncertain
			boolean uncertainData = result.isUncertain();
			// getRawData getter will return the raw data information object of barcode contents
			BarcodeDetailedData rawData = result.getRawData();
			// BarcodeDetailedData contains information about barcode's binary layout, if you
			// are only interested in raw bytes, you can obtain them with getAllData getter
			byte[] rawDataBuffer = rawData.getAllData();
			
			// if you need specific parsed driver's licence element, you can
			// use getField method
			// for example, to obtain AAMVA version, you should use:
			String aamvaVersion = result.getField(USDLScanResult.kAamvaVersionNumber);
		}
	}
}

`String getStringData()`

This method will return the string representation of barcode contents (not parsed). Note that PDF417 barcode can contain binary data so sometimes it makes little sense to obtain only string representation of barcode data.

`boolean isUncertain()`

This method will return the boolean indicating if scanned barcode is uncertain. This can return true only if scanning of uncertain barcodes is allowed, as explained earlier.

`BarcodeDetailedData getRawData()`

This method will return the object that contains information about barcode's binary layout. You can see information about that object in javadoc. However, if you only need to access byte array containing, you can call method getAllData of BarcodeDetailedData object.

`getField(String)`

This method will return a parsed US Driver's licence element. The method requires a key that defines which element should be returned and returns either a string representation of that element or null if that element does not exist in barcode. To see a list of available keys, refer to Keys for obtaining US Driver's license data

Scanning and combining results from front and back side of US Driver's licence

This section will discuss the setting up of USDL Combined Recognizer and obtaining results from it. This recognizer can be used for obtaining face image from the document and USDL barcode scan result in two steps. First, face image should be scanned (from the front side) and then recognizer initializes itself for scanning the USDL barcode.

Setting up USDL combined recognizer

To activate USDL combined recognizer, you need to create USDLCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    USDLCombinedRecognizerSettings sett = new USDLCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of USDLCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the face image is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to scan the USDL barcode (back side of the document). See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof DocumentFaceRecognitionResult) {
            // notify user to scan the USDL barcode
        }
    }
}

Obtaining results from USDL combined recognizer

USDL combined recognizer produces USDLCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of USDLCombinedRecognitionResult class.

Note: USDLCombinedRecognitionResult extends USDLScanResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof USDLCombinedRecognitionResult) {
            USDLCombinedRecognitionResult result = (USDLCombinedRecognitionResult) baseResult;
            
            // you can use getters of USDLCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // face and USDL are not from the same document
                } else {
                    String firstName = result.getField(USDLScanResult.kCustomerFirstName);
                    String familyName = result.getField(USDLScanResult.kCustomerFamilyName);
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning EU driver's licences

This section discusses the setting up of EU Driver's Licence recognizer and obtaining results from it. United Kingdom's and German's driver's licenses are supported.

Setting up EU Driver's Licence recognizer

To activate EUDL recognizer, you need to create EUDLRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	// pass country to EUDLRecognizerSettings constructor, supported countries are:
	// - UK (EUDLCountry.EUDL_COUNTRY_UK)
	// - Germany (EUDLCountry.EUDL_COUNTRY_GERMANY)
	// - Austria (EUDLCountry.EUDL_COUNTRY_AUSTRIA)
	EUDLRecognizerSettings sett = new EUDLRecognizerSettings(EUDLCountry.EUDL_COUNTRY_UK)
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak EUDL recognition parameters with methods of EUDLRecognizerSettings.

`setCountry(EUDLCountry country)`

Method activates scanning settings for given country. United Kingdom's and German's driver's licenses are supported.

`setExtractIssueDate(boolean)`

Defines if issue date should be extracted. Default is true.

`setExtractExpiryDate(boolean)`

Defines if expiry date should be extracted. Default is true.

`setExtractAddress(boolean)`

Defines if address should be extracted. Default is true.

`setShowFullDocument(boolean)`

Set this to true if you use MetadataListener and you want to obtain image containing scanned document. The document image's orientation will be corrected. The reported ImageType will be DEWARPED and image name will be EUDLRecognizerSettings.FULL_DOCUMENT_IMAGE. You will also need to enable obtaining of dewarped images in MetadataSettings. By default, this is turned off.

`setFullDocumentImageDPI(int)`

Use this method to set desired DPI (Dots Per Inch) in range [100, 400] for full document image which is returned by this recognizer.

`setShowFaceImage(boolean)`

Set this to true if you use MetadataListener and you want to obtain face image from the driver's license. The face image's orientation will be corrected. The reported ImageType will be DEWARPED and image name will be EUDLRecognizerSettings.FACE_IMAGE_NAME. You will also need to enable obtaining of dewarped images in MetadataSettings. By default, this is turned off.

Obtaining results from EU Driver's Licence recognizer

EUDL recognizer produces EUDLRecognitionResult. You can use instanceof operator to check if element in results array is instance of EUDLRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof EUDLRecognitionResult) {
			EUDLRecognitionResult result = (EUDLRecognitionResult) baseResult;
			
	        // you can use getters of EUDLRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
	           String firstName = result.getFirstName();
	           String secondName = result.getSecondName();
	           String driverNumber = result.getDriverNumber();          		 
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are:

`boolean isValid()`

Returns true if scan result is valid, i.e. if all required elements were scanned with good confidence and can be used. If false is returned that indicates that some crucial data fields are missing. You should ask user to try scanning again. If you keep getting false (i.e. invalid data) for certain document, please report that as a bug to help.microblink.com. Please include high resolution photographs of problematic documents.

`boolean isEmpty()`

Returns true if scan result is empty, i.e. nothing was scanned. All getters should return null for empty result.

`String getFirstName()`

Returns the first name of the Driver's Licence owner.

`String getLastName()`

Returns the last name of the Driver's Licence owner.

`String getDriverNumber()`

Returns the driver number.

`String getAddress()`

Returns the address of the Driver's Licence owner, if it exists.

`Date getDateOfBirth()`

Returns date of birth of the Driver's Licence owner.

`Date getDocumentIssueDate()`

Returns the issue date of the Driver's Licence.

`Date getDocumentExpiryDate()`

Returns the expiry date of the Driver's Licence.

`String getPlaceOfBirth()`

Returns the place of birth of Driver's Licence owner.

`String getDocumentIssuingAuthority()`

Returns document issuing authority.

`String getCountry()`

Returns the country where the Driver's License has been issued or null if country is unknown.

Scanning front side of Australian driver's licences

This section will discuss the setting up of Australian Driver's Licence front side recognizer and obtaining results from it.

Setting up Australian Driver's Licence front side recognizer

To activate Australian Driver's Licence front side recognizer, you need to create AustralianDLFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	AustralianDLFrontSideRecognizerSettings sett = new AustralianDLFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustralianDLFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Australian Driver's Licence front side recognizer

Australian Driver's Licence front side recognizer produces AustralianDLFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustralianDLFrontSideRecognitionResult class.

Note: AustralianDLFrontSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof AustralianDLFrontSideRecognitionResult) {
			AustralianDLFrontSideRecognitionResult result = (AustralianDLFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of AustralianDLFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String fullName = result.getName();
				String licenceNumber = result.getLicenceNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Australian driver's licences

This section will discuss the setting up of Australian Driver's Licence back side recognizer and obtaining results from it.

Setting up Australian Driver's Licence back side recognizer

To activate Australian Driver's Licence back side recognizer, you need to create AustralianDLBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	AustralianDLBackSideRecognizerSettings sett = new AustralianDLBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of AustralianDLBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from Australian Driver's Licence back side recognizer

Australian Driver's Licence back side recognizer produces AustralianDLBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of AustralianDLBackSideRecognitionResult class.

Note: AustralianDLBackSideRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof AustralianDLBackSideRecognitionResult) {
			AustralianDLBackSideRecognitionResult result = (AustralianDLBackSideRecognitionResult) baseResult;
			
	        // you can use getters of AustralianDLBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String lastName = result.getLastName();
				String licenceNumber = result.getLicenceNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of New Zealand driver's licences

This section will discuss the setting up of New Zealand Driver's Licence front side recognizer and obtaining results from it.

Setting up New Zealand Driver's Licence front side recognizer

To activate New Zealand Driver's Licence front side recognizer, you need to create NewZealandDLFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	NewZealandDLFrontRecognizerSettings sett = new NewZealandDLFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of NewZealandDLFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from New Zealand Driver's Licence front side recognizer

New Zealand Driver's Licence front side recognizer produces NewZealandDLFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of NewZealandDLFrontRecognitionResult class.

Note: NewZealandDLFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof NewZealandDLFrontRecognitionResult) {
			NewZealandDLFrontRecognitionResult result = (NewZealandDLFrontRecognitionResult) baseResult;
			
	        // you can use getters of NewZealandDLFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String surname = result.getSurname();
				String licenseNumber = result.getLicenseNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Malaysian driver's licences

This section will discuss the setting up of Malaysian Driver's Licence front side recognizer and obtaining results from it.

Setting up Malaysian Driver's Licence front side recognizer

To activate Malaysian Driver's Licence front side recognizer, you need to create MalaysianDLFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	MalaysianDLFrontRecognizerSettings sett = new MalaysianDLFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of MalaysianDLFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Malaysian Driver's Licence front side recognizer

Malaysian Driver's Licence front side recognizer produces MalaysianDLFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of MalaysianDLFrontRecognitionResult class.

Note: MalaysianDLFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof MalaysianDLFrontRecognitionResult) {
			MalaysianDLFrontRecognitionResult result = (MalaysianDLFrontRecognitionResult) baseResult;
			
	        // you can use getters of MalaysianDLFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String nationality = result.getNationality();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Malaysian MyKad ID documents

This section will discuss the setting up of Malaysian ID (MyKad) front side recognizer and obtaining results from it. MyKad front side recognizer can also be used for scanning front side of Malaysian MyTentera documents.

Setting up MyKad front side recognizer

To activate MyKad front side recognizer, you need to create MyKadFrontSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	MyKadFrontSideRecognizerSettings sett = new MyKadFrontSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak MyKad recognition parameters with methods of MyKadFrontSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from MyKad front side recognizer

MyKad front side recognizer produces MyKadFrontSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of MyKadFrontSideRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof MyKadFrontSideRecognitionResult) {
			MyKadFrontSideRecognitionResult result = (MyKadFrontSideRecognitionResult) baseResult;
			
	        // you can use getters of MyKadFrontSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String ownerFullName = result.getOwnerFullName();
				String nricNumber = result.getNRICNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Malaysian MyKad ID documents

This section will discuss the setting up of Malaysian ID (MyKad) back side recognizer and obtaining results from it.

Setting up MyKad back side recognizer

To activate MyKad back side recognizer, you need to create MyKadBackSideRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	MyKadBackSideRecognizerSettings sett = new MyKadBackSideRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak MyKad recognition parameters with methods of MyKadBackSideRecognizerSettings. Check Javadoc for more information.

Obtaining results from MyKad back side recognizer

MyKad back side recognizer produces MyKadBackSideRecognitionResult. You can use instanceof operator to check if element in results array is instance of MyKadBackSideRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof MyKadBackSideRecognitionResult) {
			MyKadBackSideRecognitionResult result = (MyKadBackSideRecognitionResult) baseResult;
			
	        // you can use getters of MyKadBackSideRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String ownerSex = result.getSex();
				String nricNumber = result.getNRIC();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Malaysian MyTentera documents

This section will discuss the setting up of Malaysian MyTentera recognizer and obtaining results from it. MyTentera documents can also be scanned by using MyKad front side recognizer. When using MyKad front side recognizer, enable returning of army number in its recognition settings, which disabled by default.

Setting up MyTentera recognizer

To activate MyTentera recognizer, you need to create MyTenteraRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	MyTenteraRecognizerSettings sett = new MyTenteraRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak MyTentera recognition parameters with methods of MyTenteraRecognizerSettings. Check Javadoc for more information.

Obtaining results from MyTentera recognizer

MyTentera recognizer produces MyTenteraRecognitionResult. You can use instanceof operator to check if element in results array is instance of MyTenteraRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof MyTenteraRecognitionResult) {
			MyTenteraRecognitionResult result = (MyTenteraRecognitionResult) baseResult;
			
	        // you can use getters of MyTenteraRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String ownerFullName = result.getOwnerFullName();
				String nricNumber = result.getNRICNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning Malaysian iKad documents

This section will discuss the setting up of Malaysian iKad documents recognizer and obtaining results from it.

Setting up iKad recognizer

To activate iKad recognizer, you need to create IKadRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	IKadRecognizerSettings sett = new IKadRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of IKadRecognizerSettings. Check Javadoc for more information.

Obtaining results from iKad recognizer

iKad recognizer produces IKadRecognitionResult. You can use instanceof operator to check if element in results array is instance of IKadRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof IKadRecognitionResult) {
			IKadRecognitionResult result = (IKadRecognitionResult) baseResult;
			
	        // you can use getters of IKadRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String passportNumber = result.getPassportNumber();
				String fullName = result.getFullName();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning front side of Singapore ID documents

This section will discuss the setting up of Singapore ID Front Side recognizer and obtaining results from it.

Setting up Singapore ID card front side recognizer

To activate Singapore ID front side recognizer, you need to create SingaporeIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SingaporeIDFrontRecognizerSettings sett = new SingaporeIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SingaporeIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from Singapore ID card front side recognizer

Singapore ID front side recognizer produces SingaporeIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of SingaporeIDFrontRecognitionResult class.

Note: SingaporeIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SingaporeIDFrontRecognitionResult) {
			SingaporeIDFrontRecognitionResult result = (SingaporeIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of SingaporeIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String cardNumber = result.getCardNumber();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of Singapore ID documents

This section will discuss the setting up of Singapore ID Back Side recognizer and obtaining results from it.

Setting up Singapore ID card back side recognizer

To activate Singapore ID back side recognizer, you need to create SingaporeIDBackRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	SingaporeIDBackRecognizerSettings sett = new SingaporeIDBackRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SingaporeIDBackRecognizerSettings. Check Javadoc for more information.

Obtaining results from Singapore ID card back side recognizer

Singapore ID back side recognizer produces SingaporeIDBackRecognitionResult. You can use instanceof operator to check if element in results array is instance of SingaporeIDBackRecognitionResult class.

Note: SingaporeIDBackRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SingaporeIDBackRecognitionResult) {
			SingaporeIDBackRecognitionResult result = (SingaporeIDBackRecognitionResult) baseResult;
			
	        // you can use getters of SingaporeIDBackRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String address = result.getAddress();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning and combining results from front and back side of Singapore ID documents

This section will discuss the setting up of Singapore ID Combined recognizer and obtaining results from it. This recognizer combines results from front and back side of the Singapore ID card to boost result accuracy. Also it checks whether front and back sides are from the same ID card.

Setting up Singapore ID card combined recognizer

To activate Singapore ID combined recognizer, you need to create SingaporeIDCombinedRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    SingaporeIDCombinedRecognizerSettings sett = new SingaporeIDCombinedRecognizerSettings();
    
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of SingaporeIDCombinedRecognizerSettings. Check Javadoc for more information.

Note: In your custom UI integration, you have to enable obtaining of partial result metadata in MetadataSettings if you want to be informed when recognition of the front side is done and receive RecognitionResultMetadata in onMetadataAvailable callback. When callback with RecognitionResultMetadata is called you can make appropriate changes in the UI to notify the user to flip document and scan back side. See the following snippet for an example:

@Override
public void onMetadataAvailable(Metadata metadata) {
    if (metadata instanceof RecognitionResultMetadata) {
        BaseRecognitionResult result = ((RecognitionResultMetadata) metadata).getScannedResult();
        if (result != null && result instanceof SingaporeIDFrontRecognitionResult) {
            // notify user to scan the back side  
        }
    }
}

Obtaining results from Singapore ID card combined recognizer

Singapore ID combined recognizer produces SingaporeIDCombinedRecognitionResult. You can use instanceof operator to check if element in results array is instance of SingaporeIDCombinedRecognitionResult class.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
    BaseRecognitionResult[] dataArray = results.getRecognitionResults();
    for(BaseRecognitionResult baseResult : dataArray) {
        if(baseResult instanceof SingaporeIDCombinedRecognitionResult) {
            SingaporeIDCombinedRecognitionResult result = (SingaporeIDCombinedRecognitionResult) baseResult;
            
            // you can use getters of SingaporeIDCombinedRecognitionResult class to 
            // obtain scanned information
            if(result.isValid() && !result.isEmpty()) {
                if (!result.isDocumentDataMatch()) {
                   // front and back sides are not from the same ID card
                } else {
                    String name = result.getName();
                }
            } else {
                // not all relevant data was scanned, ask user
                // to try again
            }
        }
    }
}

Available getters are documented in Javadoc.

Scanning front side of United Arab Emirates ID documents

This section will discuss the setting up of United Arab Emirates ID Front Side recognizer and obtaining results from it.

Setting up United Arab Emirates ID card front side recognizer

To activate United Arab Emirates ID front side recognizer, you need to create UnitedArabEmiratesIDFrontRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	UnitedArabEmiratesIDFrontRecognizerSettings sett = new UnitedArabEmiratesIDFrontRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of UnitedArabEmiratesIDFrontRecognizerSettings. Check Javadoc for more information.

Obtaining results from United Arab Emirates ID card front side recognizer

United Arab Emirates ID front side recognizer produces UnitedArabEmiratesIDFrontRecognitionResult. You can use instanceof operator to check if element in results array is instance of UnitedArabEmiratesIDFrontRecognitionResult class.

Note: UnitedArabEmiratesIDFrontRecognitionResult extends DetectorRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof UnitedArabEmiratesIDFrontRecognitionResult) {
			UnitedArabEmiratesIDFrontRecognitionResult result = (UnitedArabEmiratesIDFrontRecognitionResult) baseResult;
			
	        // you can use getters of UnitedArabEmiratesIDFrontRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String name = result.getName();
				String nationality = result.getNationality();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning back side of United Arab Emirates ID documents

This section will discuss the setting up of United Arab Emirates ID Back Side recognizer and obtaining results from it.

Setting up United Arab Emirates ID card back side recognizer

To activate United Arab Emirates ID back side recognizer, you need to create UnitedArabEmiratesIDBackRecognizerSettings and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	UnitedArabEmiratesIDBackRecognizerSettings sett = new UnitedArabEmiratesIDBackRecognizerSettings();
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

You can also tweak recognition parameters with methods of UnitedArabEmiratesIDBackRecognizerSettings. Check Javadoc for more information.

Obtaining results from United Arab Emirates ID card back side recognizer

United Arab Emirates ID back side recognizer produces UnitedArabEmiratesIDBackRecognitionResult. You can use instanceof operator to check if element in results array is instance of UnitedArabEmiratesIDBackRecognitionResult class.

Note: UnitedArabEmiratesIDBackRecognitionResult extends MRTDRecognitionResult so make sure you take that into account when using instanceof operator.

See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof UnitedArabEmiratesIDBackRecognitionResult) {
			UnitedArabEmiratesIDBackRecognitionResult result = (UnitedArabEmiratesIDBackRecognitionResult) baseResult;
			
	        // you can use getters of UnitedArabEmiratesIDBackRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
				String firstName = result.getSecondaryId();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are documented in Javadoc.

Scanning PDF417 barcodes

This section discusses the settings for setting up PDF417 recognizer and explains how to obtain results from PDF417 recognizer.

Setting up PDF417 recognizer

To activate PDF417 recognizer, you need to create a Pdf417RecognizerSettings and add it to RecognizerSettings array. You can do this using following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	Pdf417RecognizerSettings sett = new Pdf417RecognizerSettings();
	// disable scanning of white barcodes on black background
	sett.setInverseScanning(false);
	// allow scanning of barcodes that have invalid checksum
	sett.setUncertainScanning(true);
	// disable scanning of barcodes that do not have quiet zone
	// as defined by the standard
	sett.setNullQuietZoneAllowed(false);

	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

As can be seen from example, you can tweak PDF417 recognition parameters with methods of Pdf417RecognizerSettings.

`setUncertainScanning(boolean)`

By setting this to true, you will enable scanning of non-standard elements, but there is no guarantee that all data will be read. This option is used when multiple rows are missing (e.g. not whole barcode is printed). Default is false.

`setNullQuietZoneAllowed(boolean)`

By setting this to true, you will allow scanning barcodes which don't have quiet zone surrounding it (e.g. text concatenated with barcode). This option can significantly increase recognition time. Default is false.

`setInverseScanning(boolean)`

By setting this to true, you will enable scanning of barcodes with inverse intensity values (i.e. white barcodes on dark background). This option can significantly increase recognition time. Default is false.

Obtaining results from PDF417 recognizer

PDF417 recognizer produces Pdf417ScanResult. You can use instanceof operator to check if element in results array is instance of Pdf417ScanResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof Pdf417ScanResult) {
			Pdf417ScanResult result = (Pdf417ScanResult) baseResult;
			
	        // getStringData getter will return the string version of barcode contents
			String barcodeData = result.getStringData();
			// isUncertain getter will tell you if scanned barcode is uncertain
			boolean uncertainData = result.isUncertain();
			// getRawData getter will return the raw data information object of barcode contents
			BarcodeDetailedData rawData = result.getRawData();
			// BarcodeDetailedData contains information about barcode's binary layout, if you
			// are only interested in raw bytes, you can obtain them with getAllData getter
			byte[] rawDataBuffer = rawData.getAllData();
		}
	}
}

As you can see from the example, obtaining data is rather simple. You just need to call several methods of the Pdf417ScanResult object:

`String getStringData()`

This method will return the string representation of barcode contents. Note that PDF417 barcode can contain binary data so sometimes it makes little sense to obtain only string representation of barcode data.

`boolean isUncertain()`

This method will return the boolean indicating if scanned barcode is uncertain. This can return true only if scanning of uncertain barcodes is allowed, as explained earlier.

`BarcodeDetailedData getRawData()`

This method will return the object that contains information about barcode's binary layout. You can see information about that object in javadoc. However, if you only need to access byte array containing, you can call method getAllData of BarcodeDetailedData object.

`Quadrilateral getPositionOnImage()`

Returns the position of barcode on image. Note that returned coordinates are in image's coordinate system which is not related to view coordinate system used for UI.

Scanning barcodes with BarcodeRecognizer

This section discusses the settings for setting up barcode recognizer and explains how to obtain results from it.

Setting up Barcode recognizer

To activate Barcode recognizer, you need to create BarcodeRecognizerSettings and add it to RecognizerSettings array. You can do this using the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	BarcodeRecognizerSettings sett = new BarcodeRecognizerSettings();
	// disable scanning of white barcodes on black background
	sett.setInverseScanning(false);
	// activate scanning of QR codes
	sett.setScanQRCode(true);

	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

As can be seen from example, you can tweak barcode recognition parameters with methods of BarcodeRecognizerSettings.

`setScanAztecCode(boolean)`

Method activates or deactivates the scanning of Aztec 2D barcodes. Default (initial) value is false. For better Aztec scanning, you should set the license key by using the setLicenseKey(String) method. Please contact us to obtain valid license key.

`setScanCode128(boolean)`

Method activates or deactivates the scanning of Code128 1D barcodes. Default (initial) value is false.

`setScanCode39(boolean)`

Method activates or deactivates the scanning of Code39 1D barcodes. Default (initial) value is false.

`setScanDataMatrixCode(boolean)`

Method activates or deactivates the scanning of Data Matrix 2D barcodes. Default (initial) value is false.

`setScanEAN13Code(boolean)`

Method activates or deactivates the scanning of EAN 13 1D barcodes. Default (initial) value is false.

`setScanEAN8Code(boolean)`

Method activates or deactivates the scanning of EAN 8 1D barcodes. Default (initial) value is false.

`shouldScanITFCode(boolean)`

Method activates or deactivates the scanning of ITF 1D barcodes. Default (initial) value is false.

`setScanQRCode(boolean)`

Method activates or deactivates the scanning of QR 2D barcodes. Default (initial) value is false.

`setScanUPCACode(boolean)`

Method activates or deactivates the scanning of UPC A 1D barcodes. Default (initial) value is false.

`setScanUPCECode(boolean)`

Method activates or deactivates the scanning of UPC E 1D barcodes. Default (initial) value is false.

`setInverseScanning(boolean)`

By setting this to true, you will enable scanning of barcodes with inverse intensity values (i.e. white barcodes on dark background). This option can significantly increase recognition time. Default is false.

`setSlowThoroughScan(boolean)`

Use this method to enable slower, but more thorough scan procedure when scanning barcodes. By default, this option is turned on.

`setLicenseKey(String)`

Use this method to set the license key and unlock better support for Aztec scanning. Please contact us to obtain valid license key for the Aztec scanning.

Obtaining results from Barcode recognizer

Barcode recognizer produces BarcodeScanResult. You can use instanceof operator to check if element in results array is instance of BarcodeScanResult class. See the following snippet for example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof BarcodeScanResult) {
			BarcodeScanResult result = (BarcodeScanResult) baseResult;
			
			// getBarcodeType getter will return a BarcodeType enum that will define
			// the type of the barcode scanned
			BarcodeType barType = result.getBarcodeType();
	        // getStringData getter will return the string version of barcode contents
			String barcodeData = result.getStringData();
		}
	}
}

As you can see from the example, obtaining data is rather simple. You just need to call several methods of the BarcodeScanResult object.

Available getters are documented in Javadoc.

Scanning one dimensional barcodes with BlinkID's implementation

Note: BarDecoderRecognizer is deprecated, you should use BarcodeRecognizer instead.

This section discusses the settings for setting up 1D barcode recognizer that uses BlinkID's implementation of scanning algorithms and explains how to obtain results from that recognizer. Henceforth, the 1D barcode recognizer that uses BlinkID's implementation of scanning algorithms will be refered as "Bardecoder recognizer".

Setting up Bardecoder recognizer

To activate Bardecoder recognizer, you need to create a BarDecoderRecognizerSettings and add it to RecognizerSettings array. You can do this using following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	BarDecoderRecognizerSettings sett = new BarDecoderRecognizerSettings();
	// activate scanning of Code39 barcodes
	sett.setScanCode39(true);
	// activate scanning of Code128 barcodes
	sett.setScanCode128(true);
	// disable scanning of white barcodes on black background
	sett.setInverseScanning(false);
	// disable slower algorithm for low resolution barcodes
	sett.setTryHarder(false);

	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

As can be seen from example, you can tweak Bardecoder recognition parameters with methods of BarDecoderRecognizerSettings.

`setScanCode128(boolean)`

Method activates or deactivates the scanning of Code128 1D barcodes. Default (initial) value is false.

`setScanCode39(boolean)`

Method activates or deactivates the scanning of Code39 1D barcodes. Default (initial) value is false.

`setInverseScanning(boolean)`

By setting this to true, you will enable scanning of barcodes with inverse intensity values (i.e. white barcodes on dark background). This option can significantly increase recognition time. Default is false.

`setTryHarder(boolean)`

By setting this to true, you will enabled scanning of lower resolution barcodes at cost of additional processing time. This option can significantly increase recognition time. Default is false.

Obtaining results from Bardecoder recognizer

Bardecoder recognizer produces BarDecoderScanResult. You can use instanceof operator to check if element in results array is instance of BarDecoderScanResult class. See the following snippet for example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof BarDecoderScanResult) {
			BarDecoderScanResult result = (BarDecoderScanResult) baseResult;
			
			// getBarcodeType getter will return a BarcodeType enum that will define
			// the type of the barcode scanned
			BarcodeType barType = result.getBarcodeType();
	        // getStringData getter will return the string version of barcode contents
			String barcodeData = result.getStringData();
			// getRawData getter will return the raw data information object of barcode contents
			BarcodeDetailedData rawData = result.getRawData();
			// BarcodeDetailedData contains information about barcode's binary layout, if you
			// are only interested in raw bytes, you can obtain them with getAllData getter
			byte[] rawDataBuffer = rawData.getAllData();
		}
	}
}

As you can see from the example, obtaining data is rather simple. You just need to call several methods of the BarDecoderScanResult object:

`String getStringData()`

This method will return the string representation of barcode contents.

`BarcodeDetailedData getRawData()`

This method will return the object that contains information about barcode's binary layout. You can see information about that object in javadoc. However, if you only need to access byte array containing, you can call method getAllData of BarcodeDetailedData object.

`String getExtendedStringData()`

This method will return the string representation of extended barcode contents. This is available only if barcode that supports extended encoding mode was scanned (e.g. code39).

`BarcodeDetailedData getExtendedRawData()`

This method will return the object that contains information about barcode's binary layout when decoded in extended mode. You can see information about that object in javadoc. However, if you only need to access byte array containing, you can call method getAllData of BarcodeDetailedData object. This is available only if barcode that supports extended encoding mode was scanned (e.g. code39).

`getBarcodeType()`

This method will return a BarcodeType enum that defines the type of barcode scanned.

Scanning barcodes with ZXing implementation

Note: ZXingRecognizer is deprecated, you should use BarcodeRecognizer instead.

This section discusses the settings for setting up barcode recognizer that use ZXing's implementation of scanning algorithms and explains how to obtain results from it. BlinkID uses ZXing's c++ port to support barcodes for which we still do not have our own scanning algorithms. Also, since ZXing's c++ port is not maintained anymore, we also provide updates and bugfixes to it inside our codebase.

Setting up ZXing recognizer

To activate ZXing recognizer, you need to create ZXingRecognizerSettings and add it to RecognizerSettings array. You can do this using the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	ZXingRecognizerSettings sett=  new ZXingRecognizerSettings();
	// disable scanning of white barcodes on black background
	sett.setInverseScanning(false);
	// activate scanning of QR codes
	sett.setScanQRCode(true);

	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

As can be seen from example, you can tweak ZXing recognition parameters with methods of ZXingRecognizerSettings. Note that some barcodes, such as Code 39 are available for scanning with BlinkID's implementation. You can choose to use only one implementation or both (just put both settings objects into RecognizerSettings array). Using both implementations increases the chance of correct barcode recognition, but requires more processing time. Of course, we recommend using the BlinkID's implementation for supported barcodes.

`setScanAztecCode(boolean)`

Method activates or deactivates the scanning of Aztec 2D barcodes. Default (initial) value is false.

`setScanCode128(boolean)`

Method activates or deactivates the scanning of Code128 1D barcodes. Default (initial) value is false.

`setScanCode39(boolean)`

Method activates or deactivates the scanning of Code39 1D barcodes. Default (initial) value is false.

`setScanDataMatrixCode(boolean)`

Method activates or deactivates the scanning of Data Matrix 2D barcodes. Default (initial) value is false.

`setScanEAN13Code(boolean)`

Method activates or deactivates the scanning of EAN 13 1D barcodes. Default (initial) value is false.

`setScanEAN8Code(boolean)`

Method activates or deactivates the scanning of EAN 8 1D barcodes. Default (initial) value is false.

`shouldScanITFCode(boolean)`

Method activates or deactivates the scanning of ITF 1D barcodes. Default (initial) value is false.

`setScanQRCode(boolean)`

Method activates or deactivates the scanning of QR 2D barcodes. Default (initial) value is false.

`setScanUPCACode(boolean)`

Method activates or deactivates the scanning of UPC A 1D barcodes. Default (initial) value is false.

`setScanUPCECode(boolean)`

Method activates or deactivates the scanning of UPC E 1D barcodes. Default (initial) value is false.

`setInverseScanning(boolean)`

By setting this to true, you will enable scanning of barcodes with inverse intensity values (i.e. white barcodes on dark background). This option can significantly increase recognition time. Default is false.

`setSlowThoroughScan(boolean)`

Use this method to enable slower, but more thorough scan procedure when scanning barcodes. By default, this option is turned on.

Obtaining results from ZXing recognizer

ZXing recognizer produces ZXingScanResult. You can use instanceof operator to check if element in results array is instance of ZXingScanResult class. See the following snippet for example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof ZXingScanResult) {
			ZXingScanResult result = (ZXingScanResult) baseResult;
			
			// getBarcodeType getter will return a BarcodeType enum that will define
			// the type of the barcode scanned
			BarcodeType barType = result.getBarcodeType();
	        // getStringData getter will return the string version of barcode contents
			String barcodeData = result.getStringData();
		}
	}
}

As you can see from the example, obtaining data is rather simple. You just need to call several methods of the ZXingScanResult object:

`String getStringData()`

This method will return the string representation of barcode contents.

`getBarcodeType()`

This method will return a BarcodeType enum that defines the type of barcode scanned.

Scanning SIM number barcodes

This section discusses the settings for setting up SIM number recognizer and explains how to obtain its results.

Setting up SIM number recognizer

To activate SIM number recognizer, you need to create a SimNumberRecognizerSettings and add it to RecognizerSettings array. You can do this using following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	SimNumberRecognizerSettings sett = new SimNumberRecognizerSettings();
	// now add sett to recognizer settings array that is used to configure
    // recognition
	return new RecognizerSettings[] { sett };
}

Javadoc documentation for SimNumberRecognizerSettings can be found here.

Obtaining results from SIM number recognizer

SIM number recognizer produces SimNumberScanResult. You can use instanceof operator to check if element in results array is instance of SimNumberScanResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof SimNumberScanResult) {
			SimNumberScanResult result = (SimNumberScanResult) baseResult;
	       // get scanned sim number
			String simNumber = result.getSimNumber();
			if (simNumber != null) {
				// do something
			}
		}
	}
}

Available getters are documented in Javadoc.

Scanning VIN barcodes

This section discusses the settings for setting up VIN (Vehicle Identification Number) number recognizer and explains how to obtain its results.

Setting up VIN recognizer

To activate VIN recognizer, you need to create a VinRecognizerSettings and add it to RecognizerSettings array. You can do this using following code snippet:

private RecognizerSettings[] setupSettingsArray() {
	VinRecognizerSettings sett = new VinRecognizerSettings();
	// now add sett to recognizer settings array that is used to configure
    // recognition
	return new RecognizerSettings[] { sett };
}

Javadoc documentation for VinRecognizerSettings can be found here.

Obtaining results from VIN recognizer

VIN recognizer produces VinScanResult. You can use instanceof operator to check if element in results array is instance of VinScanResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof VinScanResult) {
			VinScanResult result = (VinScanResult) baseResult;
	       // get scanned VIN
			String vin = result.getVin();
			if (vin != null) {
				// do something
			}
		}
	}
}

Available getters are documented in Javadoc.

Scanning aztec barcodes

Note: AztecRecognizer is deprecated, you should use BarcodeRecognizer instead.

This section discusses the settings for setting up BarcodeRecognizer for scanning the Aztec barcodes and explains how to obtain its results.

Setting up Barcode recognizer for scanning Aztec barcodes

To activate barcode recognizer for scanning Aztec barcodes, you need to create a BarcodeRecognizerSettings and set the license key to unlock the Aztec feature. Then you should add prepared BarcodeRecognizerSettings to RecognizerSettings array. You can do this by using the following code snippet:

private RecognizerSettings[] setupSettingsArray() {
    BarcodeRecognizerSettings sett = new BarcodeRecognizerSettings();
    // please contact us to obtain valid license key to unlock the aztec feature
    // https://microblink.com/en/contact-us
    String aztecLicenseKey = getAztecLicenseKey();
    // set license key and unlock the aztec scanning feature.
    sett.setLicenseKey(aztecLicenseKey);
    // now add sett to recognizer settings array that is used to configure
    // recognition
    return new RecognizerSettings[] { sett };
}

Javadoc documentation for BarcodeRecognizerSettings can be found here.

Obtaining Aztec results

Barcode recognizer produces BarcodeScanResult. You can use instanceof operator to check if element in results array is instance of BarcodeScanResult class and getBarcodeType() method to check whether the scanned barcode is Aztec. See the following snippet for example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof BarcodeScanResult) {
			BarcodeScanResult result = (BarcodeScanResult) baseResult;
			// getBarcodeType getter will return a BarcodeType enum that will define
			// the type of the barcode scanned
			BarcodeType barType = result.getBarcodeType();
			if (barType == BarcodeType.AZTEC) {
				// we have Aztec result
				String aztecData = result.getStringData();
			}
		}
	}
}

Scanning segments with BlinkInput recognizer

This section discusses the setting up of BlinkInput recognizer and obtaining results from it. You should also check the demo for example.

Setting up BlinkInput recognizer

BlinkInput recognizer is consisted of one or more parsers that are grouped in parser groups. Each parser knows how to extract certain element from OCR result and also knows what are the best OCR engine options required to perform OCR on image. Parsers can be grouped in parser groups. Parser groups contain one or more parsers and are responsible for merging required OCR engine options of each parser in group and performing OCR only once and then letting each parser in group parse the data. Thus, you can make for own best tradeoff between speed and accuracy - putting each parser into its own group will give best accuracy, but will perform OCR of image for each parser which can consume a lot of processing time. On the other hand, putting all parsers into same group will perform only one OCR but with settings that are combined for all parsers in group, thus possibly reducing parsing quality.

Let's see this on example: assume we have two parsers at our disposal: AmountParser and EMailParser. AmountParser knows how to extract amount's from OCR result and requires from OCR only to recognise digits, periods and commas and ignore letters. On the other hand, EMailParser knows how to extract e-mails from OCR result and requires from OCR to recognise letters, digits, '@' characters and periods, but not commas.

If we put both AmountParser and EMailParser into same parser group, the merged OCR engine settings will require recognition of all letters, all digits, '@' character, both period and comma. Such OCR result will contain all characters for EMailParser to properly parse e-mail, but might confuse AmountParser if OCR misclassifies some characters into digits.

If we put AmountParser in one parser group and EMailParser in another parser group, OCR will be performed for each parser group independently, thus preventing the AmountParser confusion, but two OCR passes of image will be performed, which can have a performance impact.

So to sum it up, BlinkInput recognizer performs OCR of image for each available parser group and then runs all parsers in that group on obtained OCR result and saves parsed data.

By definition, each parser results with string that represents a parsed data. The parsed string is stored under parser's name which has to be unique within parser group. So, when defining settings for BlinkInput recognizer, when adding parsers, you need to provide a name for the parser (you will use that name for obtaining result later) and optionally provide a name for the parser group in which parser will be put into.

To activate BlinkInput recognizer, you need to create BlinkInputRecognizerSettings, add some parsers to it and add it to RecognizerSettings array. You can use the following code snippet to perform that:

private RecognizerSettings[] setupSettingsArray() {
	BlinkInputRecognizerSettings sett = new BlinkInputRecognizerSettings();
	
	// add amount parser to default parser group
	sett.addParser("myAmountParser", new AmountParserSettings());
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

The following is a list of available parsers:

Amount parser - represented by AmountParserSettings
- used for parsing amounts from OCR result
IBAN parser - represented by IbanParserSettings
- used for parsing International Bank Account Numbers (IBANs) from OCR result
E-mail parser - represented by EMailParserSettings
- used for parsing e-mail addresses
Date parser - represented by DateParserSettings
- used for parsing dates in various formats
Raw parser - represented by RawParserSettings
- used for obtaining raw OCR result
Vehicle Identification Number (VIN) parser - represented by VinParserSettings
- used for parsing vehicle identification number
License Plates parser - represented by LicensePlatesParserSettings
- used for parsing license plates numbers
Regex parser - represented by RegexParserSettings
- used for parsing arbitrary regular expressions
- please note that some features, like back references, match grouping and certain regex metacharacters are not supported. See javadoc for more info.
TopUp parser - represented by TopUpParserSettings
- used for parsing prepaid codes from mobile phone coupons

Obtaining results from BlinkInput recognizer

BlinkInput recognizer produces BlinkInputRecognitionResult. You can use instanceof operator to check if element in results array is instance of BlinkInputRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof BlinkInputRecognitionResult) {
			BlinkInputRecognitionResult result = (BlinkInputRecognitionResult) baseResult;
			
	        // you can use getters of BlinkInputRecognitionResult class to 
	        // obtain scanned information
	        if(result.isValid() && !result.isEmpty()) {
	        	 // use the parser name provided to BlinkInputRecognizerSettings to
	        	 // obtain parsed result provided by given parser
	        	 // obtain result of "myAmountParser" in default parsing group
		        String parsedAmount = result.getParsedResult("myAmountParser");
		        // note that parsed result can be null or empty even if result
		        // is marked as non-empty and valid
		        if(parsedAmount != null && !parsedAmount.isEmpty()) {
		        	// do whatever you want with parsed result
		        }
		        // obtain OCR result for default parsing group
		        // OCR result exists if result is valid and non-empty
		        OcrResult ocrResult = result.getOcrResult();
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are:

`boolean isValid()`

Returns true if scan result contains at least one OCR result in one parsing group.

`boolean isEmpty()`

Returns true if scan result is empty, i.e. nothing was scanned. All getters should return null for empty result.

`String getParsedResult(String parserName)`

Returns the parsed result provided by parser with name parserName added to default parser group. If parser with name parserName does not exists in default parser group, returns null. If parser exists, but has failed to parse any data, returns empty string.

`String getParsedResult(String parserGroupName, String parserName)`

Returns the parsed result provided by parser with name parserName added to parser group named parserGroupName. If parser with name parserName does not exists in parser group with name parserGroupName or if parser group does not exists, returns null. If parser exists, but has failed to parse any data, returns empty string.

`Object getSpecificParsedResult(String parserName)`

Returns specific parser result for concrete parser with the given parser name in default parser group. For example, date parser which is represented with DateParserSettings can return parsed date as Date object. It is always possible to obtain parsed result as raw string by using getParsedResult(String) or getParsedResult(String, String) method. If parser with name parserName does not exists in default parser group, returns null. If parser exists, but has failed to parse any data, returns null or empty string.

`Object getSpecificParsedResult(String parserGroupName, String parserName)`

Returns specific parser result for concrete parser with the given parser name in the given parser group. For example, date parser which is represented with DateParserSettings can return parsed date as Date object. It is always possible to obtain parsed result as raw string by using getParsedResult(String) or getParsedResult(String, String) method. If parser with name parserName does not exists in parser group with name parserGroupName or if parser group does not exists, returns null. If parser exists, but has failed to parse any data, returns null or empty string.

`OcrResult getOcrResult()`

Returns the OCR result structure for default parser group.

`OcrResult getOcrResult(String parserGroupName)`

Returns the OCR result structure for parser group named parserGroupName.

Scanning templated documents with DetectorRecognizer

This section discusses the setting up of DetectorRecognizer for scanning templated documents. Please check demo app for examples.

Templated document is any document which is defined by its template. Template contains the information about how the document should be detected, i.e. found on the camera scene and information about which part of document contains which useful information.

Defining how document should be detected

Before performing OCR of the document, BlinkID first needs to find its location on camera scene. In order to perform detection, you need to define DetectorSettings which will be used to instantiate detector which perform document detection. You have to set detector settings when instantiating the DetectorRecognizer as parameter to its constructor. It is possible to update detector settings with method setDetectorSettings(DetectorSettings).

You can find out more information about detectors that can be used in section Detection settings and results.

Defining how document should be recognized

After document has been detected, it will be recognized. This is done in following way:

the detector produces a DetectorResult which contains one or more detection locations.
based on array of DecodingInfos that were defined as part of concrete DetectorSettings (see setDecodingInfos(DecodingInfo[]) method of QuadDetectorSettings), for each element of array following is performed:
- location defined in DecodingInfo is dewarped to image of height defined within DecodingInfo
- a parser group that has same name as current DecodingInfo is searched and if it is found, optimal OCR settings for all parsers from that parser group is calculated
- using optimal OCR settings OCR of the dewarped image is performed
- finally, OCR result is parsed with each parser from that parser group
- if parser group with the same name as current DecodingInfo cannot be found, no OCR will be performed, however image will be reported via MetadataListener if receiving of DEWARPED images has been enabled
if no DocumentClassifier has been given with setDocumentClassifier(DocumentClassifier), recognition is done. If DocumentClassifier exists, its method classify(DetectorRecognitionResult) is called to determine which type of the document has been detected
If classifier returned string which is same as one used previously to setup parser decoding infos, then this array of DecodingInfos is obtained and step 2. is performed again with obtained array of DecodingInfos.

When to use DocumentClassifier?

If you plan scanning several different documents of same size, for example different ID cards, which are all 85x54 mm (credit card) size, then you need to use DocumentClassifer to classify the type of document so correct DecodingInfo array can be used for obtaining relevant information. An example would be the case where you need to scan both front sides of croatian and german ID cards - the location of first and last names are not same on both documents. Therefore, you first need to classify the document based on some discriminative features.

If you plan supporting only single document type, then you do not need to use DocumentClassifier.

How to implement DocumentClassifier?

DocumentClassifier is interface that should be implemented to support classification of documents that cannot be differentiated by detector. Classification result is used to determine which set of decoding infos will be used to extract classification-specific data. This interface extends the Parcelable interface and the parcelization should be implemented. Besides that, following method has to be implemented:

`String classifyDocument(DetectorRecognitionResult extractionResult)`

Based on DetectorRecognitionResult which contains data extracted from decoding infos inherent to detector, classifies the document. For each document type that you want to support, returned result string has to be equal to the name of the corresponding set of DecodingInfo objects which are defined for that document type. Named decoding info sets should be defined using setParserDecodingInfos(DecodingInfo[], String) method.

How to obtain recognition results?

Just like when using BlinkInput recognizer, same principles apply here. You use the same approach as discussed in Obtaining results from BlinkInput recognizer. Just keep in mind to use parser group names that are equal to decoding info names. Check demo app that is delivered with SDK for detailed example.

Performing detection of various documents

This section will discuss how to set up a special kind of recognizer called DetectorRecognizer which can be used to perform a detection of a document and return position of the detected document on the image or video frame.

Setting up Detector Recognizer

To activate Detector Recognizer, you need to create DetectorRecognizerSettings and add it to RecognizerSettings array. When creating DetectorRecognizerSettings, you need to initialize it with already prepared DetectorSettings. Check this chapter for more information about available detectors and how to configure them.

You can use the following code snippet to create DetectorRecognizerSettings and add it to RecognizerSettings array:

private RecognizerSettings[] setupSettingsArray() {
	DetectorRecognizerSettings sett = new DetectorRecognizerSettings(setupDetector());
	
	// now add sett to recognizer settings array that is used to configure
	// recognition
	return new RecognizerSettings[] { sett };
}

Please note that snippet above assumes existance of method setupDetector() which returns a fully configured DetectorSettings as explained in chapter Detection settings and results.

Obtaining results from Detector Recognizer

Detector Recognizer produces DetectorRecognitionResult. You can use instanceof operator to check if element in results array is instance of DetectorRecognitionResult class. See the following snippet for an example:

@Override
public void onScanningDone(RecognitionResults results) {
	BaseRecognitionResult[] dataArray = results.getRecognitionResults();
	for(BaseRecognitionResult baseResult : dataArray) {
		if(baseResult instanceof DetectorRecognitionResult) {
			DetectorRecognitionResult result = (DetectorRecognitionResult) baseResult;
			
	        // you can use getters of DetectorRecognitionResult class to 
	        // obtain detection result
	        if(result.isValid() && !result.isEmpty()) {
				DetectorResult detection = result.getDetectorResult();
				// the type of DetectorResults depends on type of configured
				// detector when setting up the DetectorRecognizer
	        } else {
	        	// not all relevant data was scanned, ask user
	        	// to try again
	        }
		}
	}
}

Available getters are:

`boolean isValid()`

Returns true if detection result is valid, i.e. if all required elements were detected with good confidence and can be used. If false is returned that indicates that some crucial data is missing. You should ask user to try scanning again. If you keep getting false (i.e. invalid data) for certain document, please report that as a bug to help.microblink.com. Please include high resolution photographs of problematic documents.

`boolean isEmpty()`

Returns true if scan result is empty, i.e. nothing was scanned. All getters should return null for empty result.

`DetectorResult getDetectorResult()`

Returns the DetectorResult generated by detector that was used to configure Detector Recognizer.

Detection settings and results

This chapter will discuss various detection settings used to configure different detectors that some recognizers can use to perform object detection prior performing further recognition of detected object's contents.

Each detector has its own version of DetectorSettings which derives DetectorSettings class. Besides that, each detector also produces its own version of DetectorResult which derives DetectorResult class. Appropriate recognizers, such as Detector Recognizer, require DetectorSettings for their initialization and provide DetectorResult in their recognition result.

DetectorSettings

Abstract DetectorSettings contains following setters that are inherited by all derived settings objects:

`setDisplayDetectedLocation(boolean)`

Defines whether detection location will be delivered as detection metadata to MetadataListener. In order for this to work, you need to set MetadataListener to RecognizerView and you need to allow receiving of detection metadata in MetadataSettings.

DetectorResult

Abstract DetectorResult contains following getters that are inherited by all derived result objects:

`DetectionCode getDetectionCode()`

Returns the Detection code which indicates the status of detection (failed, fallback or success).

Detection of documents with Machine Readable Zone

This section discusses how to use MRTD detector to perform detection of Machine Readable Zones used in various Machine Readable Travel Documents (MRTDs - ID cards and passports). This detector is used internally in Machine Readable Travel Documents recognizer to perform detection of Machine Readable Zone (MRZ) prior performing OCR and data extraction.

Setting up MRTD detector

To use MRTD detector, you need to create MRTDDetectorSettings and give it to appropriate recognizer. You can use following snippet to perform that:

private DetectorSettings setupDetector() {
	MRTDDetectorSettings settings = new MRTDDetectorSettings();

	// with following setter you can control whether you want to detect
	// machine readable zone only or full travel document
	settings.setDetectFullDocument(false);
	
	return settings;
}

As you can see from the snippet, MRTDDetectorSettings can be tweaked with following methods:

`setDetectFullDocument(boolean)`

This method allows you to enable detection of full Machine Readable Travel Documents. The position of the document is calculated from location of detected Machine Readable Zone. If this is set to false (default), then only location of Machine Readable Zone will be returned.

Obtaining MRTD detection result

MRTD detector produces MRTDDetectorResult. You can use instanceof operator to check if obtained DetectorResult is instance of MRTDDetectorResult class. See the following snippet for an example:

public void handleDetectorResult(DetectorResult detResult) {
	if (detResult instanceof MRTDDetectorResult) {
		MRTDDetectorResult result = (MRTDDetectorResult) detResult;
		Quadrilateral pos = result.getDetectionLocation();
	}
}

The available getters of MRTDDetectorResults are as follows:

`Quadrilateral getDetectionLocation()`

Returns the Quadrilateral containing the position of detection. If position is empty, all four Quadrilateral points will have coordinates (0,0).

`int[] getElementsCountPerLine()`

Returns the array of integers defining the number of char-like elements per each line of detected machine readable zone.

`MRTDDetectionCode getMRTDDetectionCode()`

Returns the MRTDDetectionCode enum defining the type of detection or null if nothing was detected.

Detection of documents with Document Detector

This section discusses how to use Document detector to perform detection of documents of certain aspect ratios. This detector can be used to detect cards, cheques, A4-sized documents, receipts and much more.

Setting up of Document Detector

To use Document Detector, you need to create DocumentDetectorSettings. When creating DocumentDetectorSettings you need to specify at least one DocumentSpecification which defines how specific document should be detected. DocumentSpecification can be created directly or from preset (recommended). Please refer to javadoc for more information on document specification.

In the following snippet, we will show how to setup DocumentDetectorSettings to perform detection of credit cards:

private DetectorSettings setupDetector() {
	DocumentSpecification cardDoc = DocumentSpecification.createFromPreset(DocumentSpecificationPreset.DOCUMENT_SPECIFICATION_PRESET_ID1_CARD);

	DocumentDetectorSettings settings = new DocumentDetectorSettings(new DocumentSpecification[] {cardDoc});

	// require at least 3 subsequent close detections (in 3 subsequent 
	// video frames) to treat detection as 'stable'
	settings.setNumStableDetectionsThreshold(3)
	
	return settings;
}

As you can see from the snippet, DocumentDetectorSettings can be tweaked with following methods:

`setNumStableDetectionsThreshold(int)`

Sets the number of subsequent close detections must occur before treating document detection as stable. Default is 1. Larger number guarantees more robust document detection at price of slower performance.

`setDocumentSpecifications(DocumentSpecification[])`

Sets the array of document specifications that define documents that can be detected. See javadoc for DocumentSpecification for more information about document specifications.

Obtaining document detection result

Document detector produces DocumentDetectorResult. You can use instanceof operator to check if obtained DetectorResult is instance of DocumentDetectorResult class. See the following snippet for an example:

public void handleDetectorResult(DetectorResult detResult) {
	if (detResult instanceof DocumentDetectorResult) {
		DocumentDetectorResult result = (DocumentDetectorResult) detResult;
		Quadrilateral pos = result.getDetectionLocation();
	}
}

Available getters of DocumentDetectorResult are as follows:

`Quadrilateral getDetectionLocation()`

Returns the Quadrilateral containing the position of detection. If position is empty, all four Quadrilateral points will have coordinates (0,0).

`double getAspectRatio()`

Returns the aspect ratio of detected document. This will be equal to aspect ratio of one of DocumentSpecification objects given to DocumentDetectorSettings.

Detection of faces with Face Detector

This section discusses how to use face detector to perform detection of faces on various documents.

Setting up Face Detector

To use Face Detector, you need to create FaceDetectorSettings and give it to appropriate recognizer. You can use following snippet to perform that:

private DetectorSettings setupDetector() {
	// following constructor initializes FaceDetector settings
	// and requests height of dewarped image to be 300 pixels
	FaceDetectorSettings settings = new FaceDetectorSettings(300);
	return settings;
}

FaceDetectorSettings can be tweaked with following methods:

`setDecodingInfo(DecodingInfo)`

This method allows you to control how detection will be dewarped. DecodingInfo constains Rectangle which defines position in detected location that is interesting, expressed as relative rectangle with respect to detected rectangle and height to which detection will be dewarped. Fore more info check out DecodingInfo.

`setDecodingInfo(int)`

This method allows you to control how detection will be dewarped (same as creating DecodingInfo containing Rectangle initialized with (0.f, 0.f, 1.f, 1.f) and given dewarp height.

Obtaining face detection result

Face Detector produces FaceDetectorResult. You can use instanceof operator to check if obtained DetectorResult is instance of FaceDetectorResult class. See the following snippet for an example:

public void handleDetectorResult(DetectorResult detResult) {
	if (detResult instanceof FaceDetectorResult) {
		FaceDetectorResult result = (FaceDetectorResult) detResult;
		Quadrilateral[] locations = result.getDetectionLocations();
	}
}

The available getters of FaceDetectorResults are as follows:

`Quadrilateral[] getDetectionLocations()`

Returns the locations of detections in coordinate system of image on which detection was performed or null if detection was not successful.

`Quadrilateral[] getTransformedDetectionLocations()`

Returns the locations of detections in normalized coordinate system of visible camera frame or null if detection was not successful.

Combining detectors with MultiDetector

This section discusses how to use Multi detector to combine multiple different detectors.

Setting up Multi Detector

To use Multi Detector, you need to create MultiDetectorSettings. When creating MultiDetectorSettings you need to specify at least one other DetectorSettings that will be wrapped with Multi Detector. In the following snippet, we demonstrate how to create a Multi detector that wraps both MRTDDetector and Document Detector and has ability to detect either Machine Readable Zone or card document:

private DetectorSettings setupDetector() {
	DocumentSpecification cardDoc = DocumentSpecification.createFromPreset(DocumentSpecificationPreset.DOCUMENT_SPECIFICATION_PRESET_ID1_CARD);
	DocumentDetectorSettings dds = new DocumentDetectorSettings(new DocumentSpecification[] {cardDoc});

	MRTDDetectorSettings mrtds = new MRTDDetectorSettings(100);

    MultiDetectorSettings mds = new MultiDetectorSettings(new DetectorSettings[] {dds, mrtds});
	
	return mds;
}

Obtaining results from Multi Detector

Multi detector produces MultiDetectorResult. You can use instanceof operator to check if obtained DetectorResult is instance of MultiDetectorResult class. See the following snippet for an example:

public void handleDetectorResult(DetectorResult detResult) {
	if (detResult instanceof MultiDetectorResult) {
		MultiDetectorResult result = (MultiDetectorResult) detResult;
		DetectorResults[] results = result.getDetectionResults();
	}
}

As you can see from the snippet, MultiDetectorResult contains one getter:

`getDetectionResults()`

Returns the array of detection results contained within. You can iterate over the array to inspect each detection result's contents.

Translation and localization

BlinkID can be localized to any language. If you are using RecognizerView in your custom scan activity, you should handle localization as in any other Android app - RecognizerView does not use strings nor drawables, it only uses assets from assets/microblink folder. Those assets must not be touched as they are required for recognition to work correctly.

However, if you use our builtin ScanCard activity, it will use resources packed with library project to display strings and images on top of camera view. We have already prepared string in several languages which you can use out of the box. You can also modify those strings, or you can add your own language.

To use a language, you have to enable it from the code:

To enable usage of predefined language you should call method LanguageUtils.setLanguage(language, context). For example, you can set language like this:
```
 // define BlinkID language
 LanguageUtils.setLanguage(Language.Croatian, this);
```
To enable usage of language that is not available in predefined language enum (for example, if you added your own language), you should call method LanguageUtils.setLanguageAndCountry(language, country, context). For example, you can set language like this:
```
 // define BlinkID language
 LanguageUtils.setLanguageAndCountry("hr", "", this);
```

Adding new language

BlinkID can easily be translated to other languages. The res folder in LibBlinkID.aar archive has folder values which contains strings.xml - this file contains english strings. In order to make e.g. croatian translation, create a folder values-hr in your project and put the copy of strings.xml inside it (you might need to extract LibBlinkID.aar archive to get access to those files). Then, open that file and change the english version strings into croatian version.

Changing strings in the existing language

To modify an existing string, the best approach would be to:

choose a language which you want to modify. For example Croatia ('hr').
find strings.xml in LibBlinkID.aar archive folder res/values-hr
choose a string key which you want to change. For example, <string name="PhotoPayHelp">Help</string>
in your project create a file strings.xml in the folder res/values-hr, if it doesn't already exist
create an entry in the file with the value for the string which you want. For example <string name="PhotoPayHelp">Pomo?</string>
repeat for all the string you wish to change

Embedding BlinkID inside another SDK

When creating your own SDK which depends on BlinkID, you should consider following cases:

BlinkID licensing model
ensuring final app gets all classes and resources that are required by BlinkID

BlinkID licensing model

BlinkID supports two types of licenses:

application licenses
library licenses.

Application licenses

Application license keys are bound to application's package name. This means that each app must have its own license key in order to be able to use BlinkID. This model is appropriate when integrating BlinkID directly into app, however if you are creating SDK that depends on BlinkID, you would need separate BlinkID license key for each of your clients using your SDK. This is not practical, so you should contact us at help.microblink.com and we can provide you a library license key.

Library licenses

Library license keys are bound to licensee name. You will provide your licensee name with your inquiry for library license key. Unlike application license keys, library license keys must be set together with licensee name:

when using ScanCard, you should provide licensee name with extra ScanCard.EXTRAS_LICENSEE, for example:

 // set the license key
 intent.putExtra(ScanCard.EXTRAS_LICENSE_KEY, "Enter_License_Key_Here");
 intent.putExtra(ScanCard.EXTRAS_LICENSEE, "Enter_Licensee_Here");

when using RecognizerView, you should use method that accepts both license key and licensee, for example:
```
 mRecognizerView.setLicenseKey("Enter_License_Key_Here", "Enter_Licensee_Here");
```

Ensuring the final app gets all resources required by BlinkID

At the time of writing this documentation, Android does not have support for combining multiple AAR libraries into single fat AAR. The problem is that resource merging is done while building application, not while building AAR, so application must be aware of all its dependencies. There is no official Android way of "hiding" third party AAR within your AAR.

This problem is usually solved with transitive Maven dependencies, i.e. when publishing your AAR to Maven you specify dependencies of your AAR so they are automatically referenced by app using your AAR. Besides this, there are also several other approaches you can try:

you can ask your clients to reference BlinkID in their app when integrating your SDK
since the problem lies in resource merging part you can try avoiding this step by ensuring your library will not use any component from BlinkID that uses resources (i.e. ScanCard). You can perform custom UI integration while taking care that all resources (strings, layouts, images, ...) used are solely from your AAR, not from BlinkID. Then, in your AAR you should not reference LibBlinkID.aar as gradle dependency, instead you should unzip it and copy its assets to your AAR?s assets folder, its classes.jar to your AAR?s lib folder (which should be referenced by gradle as jar dependency) and contents of its jni folder to your AAR?s src/main/jniLibs folder.
Another approach is to use 3rd party unofficial gradle script that aim to combine multiple AARs into single fat AAR. Use this script at your own risk.

Processor architecture considerations

BlinkID is distributed with both ARMv7, ARM64, x86 and x86_64 native library binaries.

ARMv7 architecture gives the ability to take advantage of hardware accelerated floating point operations and SIMD processing with NEON. This gives BlinkID a huge performance boost on devices that have ARMv7 processors. Most new devices (all since 2012.) have ARMv7 processor so it makes little sense not to take advantage of performance boosts that those processors can give. Also note that some devices with ARMv7 processors do not support NEON instruction sets. Most popular are those based on NVIDIA Tegra 2 fall into this category. Since these devices are old by today's standard, BlinkID does not support them.

ARM64 is the new processor architecture that most new devices use. ARM64 processors are very powerful and also have the possibility to take advantage of new NEON64 SIMD instruction set to quickly process multiple pixels with single instruction.

x86 architecture gives the ability to obtain native speed on x86 android devices, like Asus Zenfone 4. Without that, BlinkID will not work on such devices, or it will be run on top of ARM emulator that is shipped with device - this will give a huge performance penalty.

x86_64 architecture gives better performance than x86 on devices that use 64-bit Intel Atom processor.

However, there are some issues to be considered:

ARMv7 build of native library cannot be run on devices that do not have ARMv7 compatible processor (list of those old devices can be found here)
ARMv7 processors does not understand x86 instruction set
x86 processors do not understand neither ARM64 nor ARMv7 instruction sets
however, some x86 android devices ship with the builtin ARM emulator - such devices are able to run ARM binaries but with performance penalty. There is also a risk that builtin ARM emulator will not understand some specific ARM instruction and will crash.
ARM64 processors understand ARMv7 instruction set, but ARMv7 processors does not understand ARM64 instructions
if ARM64 processor executes ARMv7 code, it does not take advantage of modern NEON64 SIMD operations and does not take advantage of 64-bit registers it has - it runs in emulation mode
x86_64 processors understand x86 instruction set, but x86 processors do not understand x86_64 instruction set
if x86_64 processor executes x86 code, it does not take advantage of 64-bit registers and use two instructions instead of one for 64-bit operations

LibBlinkID.aar archive contains ARMv7, ARM64, x86 and x86_64 builds of native library. By default, when you integrate BlinkID into your app, your app will contain native builds for all processor architectures. Thus, BlinkID will work on ARMv7, ARM64, x86 and x86_64 devices and will use ARMv7 features on ARMv7 devices and ARM64 features on ARM64 devices. However, the size of your application will be rather large.

Reducing the final size of your app

If your final app is too large because of BlinkID, you can decide to create multiple flavors of your app - one flavor for each architecture. With gradle and Android studio this is very easy - just add the following code to build.gradle file of your app:

android {
  ...
  splits {
    abi {
      enable true
      reset()
      include 'x86', 'armeabi-v7a', 'arm64-v8a', 'x86_64'
      universalApk true
    }
  }
}

With that build instructions, gradle will build four different APK files for your app. Each APK will contain only native library for one processor architecture and one APK will contain all architectures. In order for Google Play to accept multiple APKs of the same app, you need to ensure that each APK has different version code. This can easily be done by defining a version code prefix that is dependent on architecture and adding real version code number to it in following gradle script:

// map for the version code
def abiVersionCodes = ['armeabi-v7a':1, 'arm64-v8a':2, 'x86':3, 'x86_64':4]

import com.android.build.OutputFile

android.applicationVariants.all { variant ->
    // assign different version code for each output
    variant.outputs.each { output ->
        def filter = output.getFilter(OutputFile.ABI)
        if(filter != null) {
            output.versionCodeOverride = abiVersionCodes.get(output.getFilter(OutputFile.ABI)) * 1000000 + android.defaultConfig.versionCode
        }
    }
}

For more information about creating APK splits with gradle, check this article from Google.

After generating multiple APK's, you need to upload them to Google Play. For tutorial and rules about uploading multiple APK's to Google Play, please read the official Google article about multiple APKs.

Removing processor architecture support in gradle without using APK splits

If you will not be distributing your app via Google Play or for some other reasons you want to have single APK of smaller size, you can completely remove support for certaing CPU architecture from your APK. This is not recommended as this has consequences.

To remove certain CPU arhitecture, add following statement to your android block inside build.gradle:

android {
	...
	packagingOptions {
		exclude 'lib/<ABI>/libBlinkID.so'
	}
}

where <ABI> represents the CPU architecture you want to remove:

to remove ARMv7 support, use exclude 'lib/armeabi-v7a/libBlinkID.so'
to remove x86 support, use exclude 'lib/x86/libBlinkID.so'
to remove ARM64 support, use exclude 'lib/arm64-v8a/libBlinkID.so'
to remove x86_64 support, use exclude 'lib/x86_64/libBlinkID.so'

You can also remove multiple processor architectures by specifying exclude directive multiple times. Just bear in mind that removing processor architecture will have sideeffects on performance and stability of your app. Please read this for more information.

Removing processor architecture support in Eclipse

This section assumes that you have set up and prepared your Eclipse project from LibBlinkID.aar as described in chapter Eclipse integration instructions.

If you are using Eclipse, removing processor architecture support gets really complicated. Eclipse does not support build flavors and you will either need to remove support for some processors or create several different library projects from LibBlinkID.aar - each one for specific processor architecture.

Native libraryies in eclipse library project are located in subfolder libs:

libs/armeabi-v7a contains native libraries for ARMv7 processor arhitecture
libs/x86 contains native libraries for x86 processor architecture
libs/arm64-v8a contains native libraries for ARM64 processor architecture
libs/x86_64 contains native libraries for x86_64 processor architecture

To remove a support for processor architecture, you should simply delete appropriate folder inside Eclipse library project:

to remove ARMv7 support, delete folder libs/armeabi-v7a
to remove x86 support, delete folder libs/x86
to remove ARM64 support, delete folder libs/arm64-v8a
to remove x86_64 support, delete folder libs/x86_64

Consequences of removing processor architecture

However, removing a processor architecture has some consequences:

by removing ARMv7 support BlinkID will not work on devices that have ARMv7 processors.
by removing ARM64 support, BlinkID will not use ARM64 features on ARM64 device
by removing x86 support, BlinkID will not work on devices that have x86 processor, except in situations when devices have ARM emulator - in that case, BlinkID will work, but will be slow
by removing x86_64 support, BlinkID will not use 64-bit optimizations on x86_64 processor, but if x86 support is not removed, BlinkID should work

Our recommendation is to include all architectures into your app - it will work on all devices and will provide best user experience. However, if you really need to reduce the size of your app, we recommend releasing separate version of your app for each processor architecture. It is easiest to do that with APK splits.

Creating customized build of BlinkID

If techniques explained in paragraph Reducing the final size of your app did not reduce the size enough for your convenience, you have the ability to create customised build of BlinkID which will contain only features that you plan to use. Using customised build of BlinkID can reduce your app size by more than 60% with respect to app size when using the generic build.

In order to create customised build of BlinkID, you first need to download the static distribution of BlinkID. A valid production licence key is required in order to gain access to the download link of BlinkID static distribution. Once you have a valid production licence key, please contact our support team and ask them to provide you with the download link. After they give you access to the static distribution of BlinkID, you will be able to download it from you account at MicroBlink Developer Dashboard.

The static distribution of BlinkID is a large zip file (several hundred megabytes) which contains static libraries of BlinkID's native code, all assets and a script which will build the customised build for you.

Prerequisites for creating customised build

In order to create customised build of BlinkID, you will need following tools:

Android development tools and SDK
Android NDK - best if installed from Android Studio's package manager
NDK CMake toolchain - you have to install that from Android Studio's package manager
Java - for running both Android Studio and provided gradle script which will create customised build

Important notes:

you must use the exact same version of NDK that we used to build the static libraries. Using different NDK version will either result with linker errors or will create non-working binary. Our script will check your NDK version and will fail if there is a version mismatch.
due to a known NDK bug, the script for creating customised build will fail on Windows. Until this is fixed, you need to run the script on Mac or Linux machine.

Steps for creating customised build (command line)

Obtain the static distribution of BlinkID by contacting us
Download the zip from link that you will be provided
Unzip the file into an empty folder
Edit the file static-distrib/enabled-features.cmake
- you should enable only features that you need to use by setting appropriate variables to ON.
- the list of all possible feature variables can be found in static-distrib/features.cmake
  - for each feature_option command, first parameter defines the feature variable, and the second is the description of the feature, i.e. what it provides. Other parameters are information for script to work correctly.
- you should not edit any file except enabled-features.cmake (except if instructed so by our support team) to ensure creation of customised build works well
In folder LibBlinkID, create file local.properties with following entries:
```
sdk.dir=/path/to/your/android-sdk-folder 
ndk.dir=/path/to/your/android-sdk-folder/ndk-bundle
```
- importing the project into android studio should do that automatically for you
Open terminal and navigate to LibBlinkID folder.
Execute command ./gradlew clean assembleRelease
After several minutes (depedending of CPU speed of your computer), customised build will appear as LibBlinkID/build/outputs/aar/LibBlinkID-release.aar. Use that AAR in your app instead of the default one.

Steps for creating customised build (Android Studio)

Follow the steps 1.-4. as in command line version (see above)
Import the static-distrib/LibBlinkID project into Android Studio
Under cpp section of imported module, make sure that all required JNI static libraries are correctly referenced
- if they are not, edit the enabled-features.cmake to correct which features need to be included in build and then select Build -> Refresh Linked C++ Projects in Android Studio menu
Open Build Variants pane and make sure release is selected for module LibBlinkID
In Android Studio menu, select Build -> Build APK
After several minutes (depedending of CPU speed of your computer), customised build will appear as LibBlinkID/build/outputs/aar/LibBlinkID-release.aar. Use that AAR in your app instead of the default one.

Warning:

Attempt to use feature within your app which was not enabled in customised build will result with your app crashing at the moment it tries to use that feature.

Troubleshooting:

Getting `UnsatisfiedLinkError` when using customised build, while everything works OK with generic build

This happens when your app is trying to use feature which was not enabled in customised build. Please make sure that you enable features that you need and not use unnecessary features within your app.

App crashing when scanning starts with log message Failed to load resource XX. The program will now crash.

This means that a required resource was not packaged into final app. This usually indicates a bug in our gradle script that makes the customised build. Please contact us and send your version of enabled-features.cmake and crash log.

CMake error while running gradle script.

You probably have a typo in enabled-features.cmake. CMake is very sensitive language and will throw an non-understandable error if you have a typo or invoke any of its commands with wrong number of parameters.

Keeping only `FEATURE_MRTD` creates rather large AAR

FEATURE_MRTD marks the MRTD recognizer. However, MRTD recognizer can also be used in Templating API mode where non-MRZ data can be scanned. To perform OCR of non-MRZ data, a rather large OCR model must be used, which supports all fonts. If you only plan to scan MRZ part of the document, you can edit the features.cmake in following way:

find the following line:

feature_resources( FEATURE_MRTD model_mrtd model_general_blink_ocr model_micr model_arabic )

keep only model_mrtd in the list, i.e. modify the line so that it will be like this:

feature_resources( FEATURE_MRTD model_mrtd )

This will keep only support for reading MRZ zone in OCR - you will not be able to scan non-MRZ data with such configuration using MRTD recognizer, however you will reduce final app size by almost 5MB.

More information about OCR models in `FEATURE_MRTD`

model_mrtd is OCR model for performing OCR of MRZ zone
model_arabic is OCR model for performing OCR of digits used in arabic languages - text scanning is not supported
model_micr is OCR model for performing OCR of Magnetic Ink Characters
model_general_blink_ocr is OCR model for performing general-purpose OCR. This model is usually required for performing OCR of non-MRZ text on documents.

Combining BlinkID with other native libraries

If you are combining BlinkID library with some other libraries that contain native code into your application, make sure you match the architectures of all native libraries. For example, if third party library has got only ARMv7 and x86 versions, you must use exactly ARMv7 and x86 versions of BlinkID with that library, but not ARM64. Using these architectures will crash your app in initialization step because JVM will try to load all its native dependencies in same preferred architecture and will fail with UnsatisfiedLinkError.

Troubleshooting

Integration problems

In case of problems with integration of the SDK, first make sure that you have tried integrating it into Android Studio by following integration instructions. Althought we do provide Eclipse ADT integration integration instructions, we officialy do not support Eclipse ADT anymore. Also, for any other IDEs unfortunately you are on your own.

If you have followed Android Studio integration instructions and are still having integration problems, please contact us at help.microblink.com.

SDK problems

In case of problems with using the SDK, you should do as follows:

Licencing problems

If you are getting "invalid licence key" error or having other licence-related problems (e.g. some feature is not enabled that should be or there is a watermark on top of camera), first check the ADB logcat. All licence-related problems are logged to error log so it is easy to determine what went wrong.

When you have determine what is the licence-relate problem or you simply do not understand the log, you should contact us help.microblink.com. When contacting us, please make sure you provide following information:

exact package name of your app (from your AndroidManifest.xml and/or your build.gradle file)
licence key that is causing problems
please stress out that you are reporting problem related to Android version of BlinkID SDK
if unsure about the problem, you should also provide excerpt from ADB logcat containing licence error

Other problems

If you are having problems with scanning certain items, undesired behaviour on specific device(s), crashes inside BlinkID or anything unmentioned, please do as follows:

enable logging to get the ability to see what is library doing. To enable logging, put this line in your application:
```
 com.microblink.util.Log.setLogLevel(com.microblink.util.Log.LogLevel.LOG_VERBOSE);
```
After this line, library will display as much information about its work as possible. Please save the entire log of scanning session to a file that you will send to us. It is important to send the entire log, not just the part where crash occured, because crashes are sometimes caused by unexpected behaviour in the early stage of the library initialization.
Contact us at help.microblink.com describing your problem and provide following information:
- log file obtained in previous step
- high resolution scan/photo of the item that you are trying to scan
- information about device that you are using - we need exact model name of the device. You can obtain that information with this app
- please stress out that you are reporting problem related to Android version of BlinkID SDK

Frequently asked questions and known problems

Here is a list of frequently asked questions and solutions for them and also a list of known problems in the SDK and how to work around them.

Sometimes scanning works, sometimes it says that feature is not supported by license key

Each license key contains information about which features are allowed to use and which are not. This error can usually happens with production licence keys when you attempt to use recognizer which was not included in licence key. You should contact support to check if provided licence key is OK and that it really contains all features that you have purchased.

When my app starts, I get exception telling me that some resource/class cannot be found or I get `ClassNotFoundException`

This usually happens when you perform integration into Eclipse project and you forget to add resources or native libraries into the project. You must alway take care that same versions of both resources, assets, java library and native libraries are used in combination. Combining different versions of resources, assets, java and native libraries will trigger crash in SDK. This problem can also occur when you have performed improper integration of BlinkID SDK into your SDK. Please read how to embed BlinkID inside another SDK.

When my app starts, I get `UnsatisfiedLinkError`

This error happens when JVM fails to load some native method from native library. If performing integration into Eclipse project make sure you have the same version of all native libraries and java wrapper. If performing integration into Android studio and this error happens, make sure that you have correctly combined BlinkID SDK with third party SDKs that contain native code. If this error also happens in our integration demo apps, then it may indicate a bug in the SDK that is manifested on specific device. Please report that to our support team.

While scanning, I get `Required parser 'X' from parser group 'Y' did not produce result!` in my app logs

This is not an error - this is merely a debug message informing you, as the developer, that parser X didn?t succeed while processing the current camera frame. This can happen due to:

poor camera frame (out of focus, poor light, glare)
- message appears occasionally while moving the camera frame
- this is common behavior given the camera frame quality, focus the camera and scan in better light conditions
incorrect regex
- message appears constantly, even with a high-quality camera frame
- check and fix your parser regex and keep in mind that some features, like back references, match grouping and certain regex metacharacters are not supported. See javadoc for more info.
incorrect OCR engine settings
- message appears often, even with a high-quality camera frame
- check that all letters that are referenced in your regular expression are added to whitelist
if using Templating API:
- if message appears often:
  - check relative positions of your DecodingInfos as they might not be correctly set up
- if message appears occasionally:
  - document detection has failed for the current video frame due to a poor camera frame, or document part that needs to be extracted is covered with glare

Additional info

Complete API reference can be found in Javadoc.

For any other questions, feel free to contact us at help.microblink.com.

Uh oh!

Uh oh!

Suljak/blinkid-android

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages