Ste94dj
Follow
Lists (1)
Stars
A small, lightweight and fast DMX RDM compatible dimmer for an ATTiny841.
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
DMX Transmit and Receive for Teensy with RDM support.
RP2040-based USB DMX dongle with integrated web server
Lightweight arduino library to read basic data using the VE.Direct protocol from Victron Energy
Ve.direct frame handler used on Raspberry Pi and ESP32.
Victron Energy VE.Direct protocol input parser for SensESP
Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before adding the data.
M5Stack Tough (ESP-32) Sailing Instruments Display and Autopilot Control
Send data from an Arduino mega to a Nodemcu and from a Nodemcu to an Arduino mega at the same time (technically not at the same time).
The Trinamic TMC429 is a triple-axis dedicated step and direction motion controller for both position and velocity control with acceleration and deceleration trapezoidal ramps.
A high speed stepper library for Atmega 168/328p (nano), Atmega32u4, Atmega 2560, ESP32, ESP32S2, ESP32S3, ESP32C3, ESP32C6 and Atmel SAM Due
A system to control a stepper motor over DMX protocol.
Kindle Booklet for displaying NMEA2000 data from a json feed on an ESP32
An open source trolling motor. Features Hold heading, Hold Position, AutoPilot (NMEA APB & GPX). It still needs a lot of work but it's functional.
A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.
This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.
Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.
Remote control for anchor chain that shows current chain lenght via WLAN to phone/tablet (with ESP8266 D1 Mini).
To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.