update locale

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-07 21:36+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -7408,6 +7408,14 @@ msgstr ""
 msgid "End G-code when finish the printing of this filament"
 msgstr ""
 
+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr ""
 
@@ -9727,6 +9735,15 @@ msgid ""
 "itself. It's expressed as a percentage over nozzle diameter"
 msgstr ""
 
+msgid "Detect narrow internal solid infill"
+msgstr ""
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+
 msgid "invalid value "
 msgstr ""
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-07 21:36+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -8059,6 +8059,16 @@ msgstr "Konec G-kód po dokončení celého tisku"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Konec G-kód po dokončení tisku tohoto filamentu"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Zajistit tloušťku svislých stěn"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
+"(vrchních a spodních plných vrstev)"
+
 msgid "Top surface pattern"
 msgstr "Vzor horního povrchu"
 
@@ -10879,6 +10889,18 @@ msgstr ""
 "stejně tlustá jako prvek samotný. Vyjadřuje se jako procento nad průměr "
 "trysky"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detekovat úzkou vnitřní plnou výplň"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. Je-"
+"li povolena, bude pro oblast použit soustředný vzor, aby se urychlil tisk. V "
+"opačném případě se ve výchozím nastavení použije přímočarý vzor."
+
 msgid "invalid value "
 msgstr "neplatná hodnota "
 
@@ -12396,16 +12418,6 @@ msgstr ""
 #~ "Teplota podložky překračuje teplotu vitrifikace filamentu. Prosím. Před "
 #~ "tiskem otevřete přední dvířka tiskárny, aby nedošlo k ucpání trysky."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zajistit tloušťku svislých stěn"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn "
-#~ "(vrchních a spodních plných vrstev)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Teplota vitrifikace"
 
@@ -12436,18 +12448,6 @@ msgstr ""
 #~ "touto rychlostí během tisku kromě prvních několika vrstev, které nejsou "
 #~ "definovány žádnými chladicími vrstvami"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detekovat úzkou vnitřní plnou výplň"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Tato možnost automaticky rozpozná úzkou vnitřní plnou výplňovou oblast. "
-#~ "Je-li povolena, bude pro oblast použit soustředný vzor, aby se urychlil "
-#~ "tisk. V opačném případě se ve výchozím nastavení použije přímočarý vzor."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

localization/i18n/de/OrcaSlicer_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-07 21:36+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -8267,6 +8267,16 @@ msgstr "End G-Code nach dem fertigstellen des Drucks hinzufügen."
 msgid "End G-code when finish the printing of this filament"
 msgstr "End-G-Code hinzufügen, wenn der Druck dieses Filaments beenden ist."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Sicherstellung der vertikalen Wanddicke"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
+"vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
+
 msgid "Top surface pattern"
 msgstr "Muster der Oberfläche"
 
@@ -11194,6 +11204,19 @@ msgstr ""
 "Dicke des Features, wird die Wand so dick wie das Feature selbst. Wird als "
 "Prozentsatz des Düsendurchmessers angegeben."
 
+msgid "Detect narrow internal solid infill"
+msgstr "Erkennen einer schmalen internen soliden Füllung"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Mit dieser Option wird ein schmaler innerer Füllbereich automatisch erkannt. "
+"Wenn diese Option aktiviert ist, wird ein konzentrisches Muster für den "
+"Bereich verwendet, um den Druck zu beschleunigen. Andernfalls wird "
+"standardmäßig ein geradliniges Muster verwendet."
+
 msgid "invalid value "
 msgstr "Ungültiger Wert"
 
@@ -12757,16 +12780,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "Aktivieren Sie die Luftfilterung für eine bessere Luftfiltration"
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Sicherstellung der vertikalen Wanddicke"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
-#~ "vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Verglasungstemperatur"
 
@@ -12802,19 +12815,6 @@ msgstr ""
 #~ "läuft während des Drucks mit dieser Geschwindigkeit, mit Ausnahme der "
 #~ "ersten Schichten, für die keine Kühlung vorgesehen ist."
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Erkennen einer schmalen internen soliden Füllung"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Mit dieser Option wird ein schmaler innerer Füllbereich automatisch "
-#~ "erkannt. Wenn diese Option aktiviert ist, wird ein konzentrisches Muster "
-#~ "für den Bereich verwendet, um den Druck zu beschleunigen. Andernfalls "
-#~ "wird standardmäßig ein geradliniges Muster verwendet."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"

localization/i18n/en/OrcaSlicer_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-07 21:36+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -7882,6 +7882,16 @@ msgstr "Add end G-Code when finishing the entire print."
 msgid "End G-code when finish the printing of this filament"
 msgstr "Add end G-code when finishing the printing of this filament."
 
+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
 msgid "Top surface pattern"
 msgstr "Top surface pattern"
 
@@ -10432,6 +10442,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detect narrow internal solid infill"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"This option will auto-detect narrow internal solid infill areas. If enabled, "
+"the concentric pattern will be used for the area to speed up printing. "
+"Otherwise, the rectilinear pattern will be used by default."
+
 msgid "invalid value "
 msgstr "invalid value "
 
@@ -11707,16 +11729,6 @@ msgstr ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clogs."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Ensure vertical shell thickness"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperature of vitrification"
 
@@ -11739,18 +11751,6 @@ msgstr ""
 #~ "run at this speed during printing except for during the first several "
 #~ "layers which may be set to have no part cooling."
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detect narrow internal solid infill"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "This option will auto-detect narrow internal solid infill areas. If "
-#~ "enabled, the concentric pattern will be used for the area to speed up "
-#~ "printing. Otherwise, the rectilinear pattern will be used by default."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Empty layers around bottom are replaced by nearest normal layers."
 

localization/i18n/es/OrcaSlicer_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-04 14:18+0800\n"
+"POT-Creation-Date: 2023-11-07 21:36+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -8205,6 +8205,16 @@ msgstr "Finalizar el G-Code cuando termine la impresión completa"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Terminar el G-Code cuando se termine de imprimir este filamento"
 
+msgid "Ensure vertical shell thickness"
+msgstr "Detección de paredes delgadas"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Añadir relleno sólido al lado de capas inclinadas para garantizar el grosor "
+"de carcasa vertical (capas sólidas superior+inferior)"
+
 msgid "Top surface pattern"
 msgstr "Patrón de relleno superior"
 
@@ -11135,6 +11145,19 @@ msgstr ""
 "propia característica. Se expresa en porcentaje sobre el diámetro de la "
 "boquilla"
 
+msgid "Detect narrow internal solid infill"
+msgstr "Detección de pequeños rellenos sólidos"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Esta opción detectará automáticamente el área de relleno sólido interno "
+"estrecho. Si se activa, se utilizará un patrón concéntrico para el área para "
+"acelerar la impresión. De lo contrario, se utilizará por defecto un patrón "
+"rectilíneo."
+
 msgid "invalid value "
 msgstr "valor inválido "
 
@@ -12725,16 +12748,6 @@ msgstr ""
 #~ "filamento. Por favor, abra la puerta frontal de la impresora antes de "
 #~ "imprimir para evitar atascos en la boquilla."
 
-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Detección de paredes delgadas"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Añadir relleno sólido al lado de capas inclinadas para garantizar el "
-#~ "grosor de carcasa vertical (capas sólidas superior+inferior)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatura de vitrificación"
 
@@ -12759,19 +12772,6 @@ msgstr ""
 #~ "funcionará a esta velocidad durante la impresión, excepto en las primeras "
 #~ "capas, que se define por la ausencia de capas de refrigeración"
 
-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detección de pequeños rellenos sólidos"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Esta opción detectará automáticamente el área de relleno sólido interno "
-#~ "estrecho. Si se activa, se utilizará un patrón concéntrico para el área "
-#~ "para acelerar la impresión. De lo contrario, se utilizará por defecto un "
-#~ "patrón rectilíneo."
-
 #~ msgid "Cali"
 #~ msgstr "Cali"