Skip to content

Commit

Permalink
Release v1.26.1
Browse files Browse the repository at this point in the history
  • Loading branch information
@ALABSTM
ALABSTM committed Apr 1, 2021
1 parent d599a82 commit 2f3b26f
Show file tree
Hide file tree
Showing 46 changed files with 18,370 additions and 3,281 deletions.
17 changes: 9 additions & 8 deletions Drivers/STM32F4xx_HAL_Driver/README.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -36,14 +36,15 @@ In this table, you can find the successive versions of this HAL-LL Driver compon

It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device - HAL, as mentioned in this table.

HAL Driver F4 | CMSIS Device F4 | CMSIS Core | Was delivered in the full MCU package
------------- | --------------- | ---------- | -------------------------------------
Tag v1.7.6 | Tag v2.6.3 | Tag v5.4.0_cm4 | Tag v1.24.1 (and following, if any, till next tag)
Tag v1.7.7 | Tag v2.6.4 | Tag v5.4.0_cm4 | Tag v1.24.2 (and following, if any, till next tag)
Tag v1.7.8 | Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.0 (and following, if any, till next tag)
Tag v1.7.9 | Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.1 (and following, if any, till next tag)
Tag v1.7.10| Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.2 (and following, if any, till next tag)
Tag v1.7.11| Tag v2.6.6 | Tag v5.4.0_cm4 | Tag v1.26.0 (and following, if any, till next tag)
HAL Driver F4 | CMSIS Device F4 | CMSIS Core | Was delivered in the full MCU package
------------- | --------------- | -------------- | -------------------------------------
Tag v1.7.6 | Tag v2.6.3 | Tag v5.4.0_cm4 | Tag v1.24.1 (and following, if any, till next tag)
Tag v1.7.7 | Tag v2.6.4 | Tag v5.4.0_cm4 | Tag v1.24.2 (and following, if any, till next tag)
Tag v1.7.8 | Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.0 (and following, if any, till next tag)
Tag v1.7.9 | Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.1 (and following, if any, till next tag)
Tag v1.7.10 | Tag v2.6.5 | Tag v5.4.0_cm4 | Tag v1.25.2 (and following, if any, till ne1xt tag)
Tag v1.7.11 | Tag v2.6.6 | Tag v5.4.0_cm4 | Tag v1.26.0 (and following, if any, till next tag)
Tag v1.7.12 | Tag v2.6.6 | Tag v5.4.0_cm4 | Tag v1.26.1 (and following, if any, till next tag)

The full **STM32CubeF4** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeF4).

Expand Down
20,830 changes: 17,889 additions & 2,941 deletions Drivers/STM32F4xx_HAL_Driver/Release_Notes.html
View file

Large diffs are not rendered by default.

4 changes: 2 additions & 2 deletions Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -50,11 +50,11 @@
* @{
*/
/**
* @brief STM32F4xx HAL Driver version number V1.7.11
* @brief STM32F4xx HAL Driver version number V1.7.12
*/
#define __STM32F4xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32F4xx_HAL_VERSION_SUB1 (0x07U) /*!< [23:16] sub1 version */
#define __STM32F4xx_HAL_VERSION_SUB2 (0x0BU) /*!< [15:8] sub2 version */
#define __STM32F4xx_HAL_VERSION_SUB2 (0x0CU) /*!< [15:8] sub2 version */
#define __STM32F4xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
|(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
Expand Down
4 changes: 2 additions & 2 deletions Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2557,7 +2557,7 @@ static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
pdata8bits = (uint8_t *) husart->pRxBuffPtr;
pdata16bits = NULL;

if ((husart->Init.WordLength == UART_WORDLENGTH_9B) || ((husart->Init.WordLength == UART_WORDLENGTH_8B) && (husart->Init.Parity == UART_PARITY_NONE)))
if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
{
*pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
}
Expand Down Expand Up @@ -2662,7 +2662,7 @@ static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
{
pdata8bits = (uint8_t *) husart->pRxBuffPtr;
pdata16bits = NULL;
if ((husart->Init.WordLength == UART_WORDLENGTH_9B) || ((husart->Init.WordLength == UART_WORDLENGTH_8B) && (husart->Init.Parity == UART_PARITY_NONE)))
if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
{
*pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
}
Expand Down
246 changes: 170 additions & 76 deletions Projects/Release_Notes.html
View file

Large diffs are not rendered by default.

4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Applications/EEPROM/EEPROM_Emulation/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -221,7 +221,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -237,7 +237,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/ADC/ADC_RegularConversion_DMA/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -136,7 +136,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -152,7 +152,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/BSP/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -123,7 +123,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -139,7 +139,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/DMA/DMA_FLASHToRAM/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -194,7 +194,7 @@ static void TransferError(DMA_HandleTypeDef *DmaHandle)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -210,7 +210,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/FLASH/FLASH_EraseProgram/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -280,7 +280,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -296,7 +296,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/GPIO/GPIO_EXTI/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -93,7 +93,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -109,7 +109,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/HAL/HAL_TimeBase_TIM/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -132,7 +132,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 2
* @param None
* @retval None
Expand All @@ -148,7 +148,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_AdvComIT/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -415,7 +415,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -431,7 +431,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_ComDMA/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -246,7 +246,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -262,7 +262,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_ComIT/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -249,7 +249,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -265,7 +265,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_ComPolling/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -229,7 +229,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -245,7 +245,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_RestartAdvComIT/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -364,7 +364,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -380,7 +380,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/I2C/I2C_TwoBoards_RestartComIT/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -261,7 +261,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -277,7 +277,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/PWR/PWR_CurrentConsumption/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -163,7 +163,7 @@ int main(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -179,7 +179,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
6 changes: 3 additions & 3 deletions Projects/STM32F411E-Discovery/Examples/RCC/RCC_ClockConfig/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -74,7 +74,7 @@ int main(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSE oscillator and configure the PLL to reach the max system frequency (100 MHz)
when using HSE oscillator as PLL clock source. */
Expand Down Expand Up @@ -163,7 +163,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand Down Expand Up @@ -232,7 +232,7 @@ void SystemClockHSE_Config(void)
* PLL_N = 400
* PLL_P = 4
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand Down
4 changes: 2 additions & 2 deletions Projects/STM32F411E-Discovery/Examples/SPI/SPI_FullDuplex_ComDMA/Src/main.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -181,7 +181,7 @@ static void Error_Handler(void)
* PLL_P = 4
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale2 mode
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
Expand All @@ -197,7 +197,7 @@ static void SystemClock_Config(void)
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSI Oscillator and activate PLL with HSI as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
Expand Down
Loading

0 comments on commit 2f3b26f

Please sign in to comment.