MAAS Anvil

A snap for managing charmed MAAS deployments.

MAAS Anvil is currently in a closed beta stage, approaching production stability

Multi-node installation steps

The following instructions assume that nodes infra1, infra2, infra3 are deployed with Ubuntu 22.04 LTS and their networking is properly configured.

In addition, the instructions assume that MAAS Anvil will deploy all the available components (roles) in all three nodes:

• MAAS region controller
• MAAS rack controller (agent)
• PostgreSQL
• HAProxy

Preparation steps for each node

ubuntu@infra{1,2,3}:~$ sudo snap install maas-anvil --edge
ubuntu@infra{1,2,3}:~$ maas-anvil prepare-node-script | bash -x
ubuntu@infra{1,2,3}:~$ newgrp snap_daemon

Bootstrap the first node

ubuntu@infra1:~$ maas-anvil cluster bootstrap \
    --role database --role region --role agent --role haproxy \
    --accept-defaults

Note: You will be asked for a virtual_ip during installation of the HAProxy charm, if accept-defaults is omitted. Pass an empty value to disable it, or any valid IP to enable; the Keepalived charm will be installed to enable connecting to HA MAAS using the VIP.

PostgreSQL max_connections

You will be asked for a max_connections during installation of the PostgreSQL charm, if accept-defaults is omitted. Use default if you need the default values of PostgreSQL to be applied to max_connections. If you are aiming for MAAS HA though you have to do one of the following:

• If number of MAAS region nodes is known beforehand, you can calculate the desired max_connections and set them, based on the formula: max_connections = max(100, 10 + 50 * number_of_region_nodes).
• If number of MAAS region nodes is not known, you can set max_connections to dynamic and let MAAS Anvil recalculate the appropriate PostgreSQL max_connections every time a region node is joining or leaving the Anvil cluster. This options includes a database restart with every modification.

Add new nodes to the MAAS cluster

ubuntu@infra1:~$ maas-anvil cluster add --name infra2.
Token for the Node infra2.: eyJuYW1lIjoibWFhcy00Lm1hYXMiLCJzZWNyZXQiOiI3MmE512342abcdEASWWxOWNlYWNkYmJjMWRmMjk4OThkYWFkYzQzMDAzZjk4NmRkZDI2MWRhYWVkZTIxIiwiZmluZ2VycHJpbnQiOiJlODU5ZmY5NjAwMDU4OGFjZmQ5ZDM0NjFhMDk5NmU1YTU3YjhjN2Q2ZjE4M2NjZDRlOTg2NGRkZjQ3NWMwZWM1Iiwiam9pbl9hZGRyZXNzZXMiOlsiMTAuMjAuMC43OjcwMDAiLCIxMC4yMC4wLjg6NzAwMCJdfQ==

ubuntu@infra1:~$ maas-anvil cluster add --name infra3.
Token for the Node infra3.: eyJuYW1lIjoibWFhcy00Lm1hYXMiLCJzZWNyZXQiOiI3MmE512342abcdEASWWxOWNlYWNkYmJjMWRmMjk4OThkYWFkYzQzMDAzZjk4NmRkZDI2MWRhYWVkZTIxIiwiZmluZ2VycHJpbnQiOiJlODU5ZmY5NjAwMDU4OGFjZmQ5ZDM0NjFhMDk5NmU1YTU3YjhjN2Q2ZjE4M2NjZDRlOTg2NGRkZjQ3NWMwZWM1Iiwiam9pbl9hZGRyZXNzZXMiOlsiMTAuMjAuMC43OjcwMDAiLCIxMC4yMC4wLjg6NzAwMCJdfQ==

Join new nodes to the MAAS cluster

ubuntu@infra2:~$ maas-anvil cluster join \
    --role database --role region --role agent --role haproxy \
    --token eyJuYW1lIjoibWFhcy00Lm1hYXMiLCJzZWNyZXQiOiI3MmE512342abcdEASWWxOWNlYWNkYmJjMWRmMjk4OThkYWFkYzQzMDAzZjk4NmRkZDI2MWRhYWVkZTIxIiwiZmluZ2VycHJpbnQiOiJlODU5ZmY5NjAwMDU4OGFjZmQ5ZDM0NjFhMDk5NmU1YTU3YjhjN2Q2ZjE4M2NjZDRlOTg2NGRkZjQ3NWMwZWM1Iiwiam9pbl9hZGRyZXNzZXMiOlsiMTAuMjAuMC43OjcwMDAiLCIxMC4yMC4wLjg6NzAwMCJdfQ==

ubuntu@infra3:~$ maas-anvil cluster join \
    --role database --role region --role agent --role haproxy \
    --token eyJuYW1lIjoibWFhcy00Lm1hYXMiLCJzZWNyZXQiOiI3MmE512342abcdEASWWxOWNlYWNkYmJjMWRmMjk4OThkYWFkYzQzMDAzZjk4NmRkZDI2MWRhYWVkZTIxIiwiZmluZ2VycHJpbnQiOiJlODU5ZmY5NjAwMDU4OGFjZmQ5ZDM0NjFhMDk5NmU1YTU3YjhjN2Q2ZjE4M2NjZDRlOTg2NGRkZjQ3NWMwZWM1Iiwiam9pbl9hZGRyZXNzZXMiOlsiMTAuMjAuMC43OjcwMDAiLCIxMC4yMC4wLjg6NzAwMCJdfQ==

Confirm the cluster status

ubuntu@infra1:~$ maas-anvil cluster list
┏━━━━━━━━┳━━━━━━━━┳━━━━━━━━┳━━━━━━━┳━━━━━━━━━━┳━━━━━━━━━┓
┃ Node   ┃ Status ┃ Region ┃ Agent ┃ Database ┃ HAProxy ┃
┡━━━━━━━━╇━━━━━━━━╇━━━━━━━━╇━━━━━━━╇━━━━━━━━━━╇━━━━━━━━━┩
│ infra1 │   up   │   x    │   x   │    x     │    x    │
│ infra2 │   up   │   x    │   x   │    x     │    x    │
│ infra3 │   up   │   x    │   x   │    x     │    x    │
└────────┴────────┴────────┴───────┴──────────┴─────────┘

Create MAAS admin user

ubuntu@infra1:~$ juju run maas-region/0 create-admin username=admin password=pass email=admin@maas.io ssh-import=lp:maasadmin

Managing the cluster after initial deployment

Cluster updates

You can refresh the cluster by running the refresh command:

ubuntu@infra1:~$ maas-anvil refresh

This allows passing a new manifest file with --manifest for updating configuration options.

Juju permission denied

If you get an error message such as:

please enter password for $node on anvil-controller:

It is because Juju oauth macaroons typically expire after 24h. If you need to interact with the MAAS-anvil Juju controller after this time has passed, you will need to re-authenticate your session.

You can do this directly using the MAAS-anvil command:

ubuntu@$node:~$ maas-anvil juju-login

You can also manually fetch the login credentials from anvil with:

ubuntu@$node:~$ cat ~/snap/maas-anvil/current/account.yaml
password: $password
user: $user

And juju login as usual.

Charm documentation

• MAAS Region: https://charmhub.io/maas-region
• MAAS Region: https://charmhub.io/maas-agent
• PostgreSQL: https://charmhub.io/postgresql
• PgBouncer: https://charmhub.io/pgbouncer
• HAProxy: https://charmhub.io/haproxy
• Keepalived: https://charmhub.io/keepalived