Merge tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xili…

…nx/linux-xlnx into arm/fixes arm64: soc: ZynqMP SoC fixes for v5.10-rc6 - Fix SD dll reset issue by using proper macro - Fix PM feature checking for Xilinx Versal SoC * tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits) firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue Linux 5.10-rc4 kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use afs: Fix afs_write_end() when called with copied == 0 [ver #3] ocfs2: initialize ip_next_orphan panic: don't dump stack twice on warn hugetlbfs: fix anon huge page migration race mm: memcontrol: fix missing wakeup polling thread kernel/watchdog: fix watchdog_allowed_mask not used warning reboot: fix overflow parsing reboot cpu number Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" compiler.h: fix barrier_data() on clang mm/gup: use unpin_user_pages() in __gup_longterm_locked() mm/slub: fix panic in slab_alloc_node() mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate mm/compaction: count pages and stop correctly during page isolation drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere ... Link: https://lore.kernel.org/r/fd5ab967-f3cf-95fb-7947-5477ff85f97e@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rust-for-Linux · Nov 26, 2020 · dbae273 · dbae273
2 parents 4765df4 + acfdd18
commit dbae273
Show file tree

Hide file tree

Showing 366 changed files with 6,001 additions and 2,448 deletions.
diff --git a/.mailmap b/.mailmap
@@ -82,7 +82,10 @@ Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
 <dev.kurt@vandijck-laurijssen.be> <kurt.van.dijck@eia.be>
-Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <[dbaryshkov@gmail.com]>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_baryshkov@mentor.com>
+Dmitry Baryshkov <dbaryshkov@gmail.com> <dmitry_eremin@mentor.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
 Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -57,7 +57,7 @@ examples:
     };
 
     can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
         reg = <0x53fc8000 0x4000>;
         interrupts = <82>;
         clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;

diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -20,14 +20,17 @@ properties:
           - fsl,imx8qm-flexcan
           - fsl,imx8mp-flexcan
           - fsl,imx6q-flexcan
-          - fsl,imx53-flexcan
-          - fsl,imx35-flexcan
           - fsl,imx28-flexcan
           - fsl,imx25-flexcan
           - fsl,p1010-flexcan
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx53-flexcan
+              - fsl,imx35-flexcan
+          - const: fsl,imx25-flexcan
       - items:
           - enum:
               - fsl,imx7d-flexcan
@@ -81,11 +84,12 @@ properties:
       req_bit is the bit offset of CAN stop request.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: The 'gpr' is the phandle to general purpose register node.
-      - description: The 'req_gpr' is the gpr register offset of CAN stop request.
-        maximum: 0xff
-      - description: The 'req_bit' is the bit offset of CAN stop request.
-        maximum: 0x1f
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+          maximum: 0xff
+        - description: The 'req_bit' is the bit offset of CAN stop request.
+          maximum: 0x1f
 
   fsl,clk-source:
     description: |

diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst
@@ -256,6 +256,10 @@ which is 1024 bytes long:
      - s\_padding2
      -
    * - 0x54
+     - \_\_be32
+     - s\_num\_fc\_blocks
+     - Number of fast commit blocks in the journal.
+   * - 0x58
      - \_\_u32
      - s\_padding[42]
      -
@@ -310,6 +314,8 @@ The journal incompat features are any combination of the following:
      - This journal uses v3 of the checksum on-disk format. This is the same as
        v2, but the journal block tag size is fixed regardless of the size of
        block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3)
+   * - 0x20
+     - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT)
 
 .. _jbd2_checksum_type:
 

diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst
@@ -596,6 +596,13 @@ following:
      - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs
        points to the two block groups that contain backup superblocks
        (COMPAT\_SPARSE\_SUPER2).
+   * - 0x400
+     - Fast commits supported. Although fast commits blocks are
+       backward incompatible, fast commit blocks are not always
+       present in the journal. If fast commit blocks are present in
+       the journal, JBD2 incompat feature
+       (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets
+       set (COMPAT\_FAST\_COMMIT).
 
 .. _super_incompat:
 

diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst
@@ -136,10 +136,8 @@ Fast commits
 ~~~~~~~~~~~~
 
 JBD2 to also allows you to perform file-system specific delta commits known as
-fast commits. In order to use fast commits, you first need to call
-:c:func:`jbd2_fc_init` and tell how many blocks at the end of journal
-area should be reserved for fast commits. Along with that, you will also need
-to set following callbacks that perform correspodning work:
+fast commits. In order to use fast commits, you will need to set following
+callbacks that perform correspodning work:
 
 `journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and
 fast commit.

diff --git a/Documentation/firmware-guide/acpi/acpi-lid.rst b/Documentation/firmware-guide/acpi/acpi-lid.rst
@@ -19,9 +19,9 @@ report the "current" state of the lid as either "opened" or "closed".
 
 For most platforms, both the _LID method and the lid notifications are
 reliable. However, there are exceptions. In order to work with these
-exceptional buggy platforms, special restrictions and expections should be
+exceptional buggy platforms, special restrictions and exceptions should be
 taken into account. This document describes the restrictions and the
-expections of the Linux ACPI lid device driver.
+exceptions of the Linux ACPI lid device driver.
 
 
 Restrictions of the returning value of the _LID control method
@@ -46,7 +46,7 @@ state is changed to "closed". The "closed" notification is normally used to
 trigger some system power saving operations on Windows. Since it is fully
 tested, it is reliable from all AML tables.
 
-Expections for the userspace users of the ACPI lid device driver
+Exceptions for the userspace users of the ACPI lid device driver
 ================================================================
 
 The ACPI button driver exports the lid state to the userspace via the
@@ -100,7 +100,7 @@ use the following kernel parameter:
 C. button.lid_init_state=ignore:
    When this option is specified, the ACPI button driver never reports the
    initial lid state and there is a compensation mechanism implemented to
-   ensure that the reliable "closed" notifications can always be delievered
+   ensure that the reliable "closed" notifications can always be delivered
    to the userspace by always pairing "closed" input events with complement
    "opened" input events. But there is still no guarantee that the "opened"
    notifications can be delivered to the userspace when the lid is actually

diff --git a/Documentation/firmware-guide/acpi/gpio-properties.rst b/Documentation/firmware-guide/acpi/gpio-properties.rst
@@ -20,9 +20,9 @@ index, like the ASL example below shows::
 
       Name (_CRS, ResourceTemplate ()
       {
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {15}
-          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionOutputOnly,
                   "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
       })
 
@@ -49,15 +49,41 @@ index
 pin
   Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
 active_low
-  If 1 the GPIO is marked as active_low.
+  If 1, the GPIO is marked as active_low.
 
 Since ACPI GpioIo() resource does not have a field saying whether it is
 active low or high, the "active_low" argument can be used here.  Setting
 it to 1 marks the GPIO as active low.
 
+Note, active_low in _DSD does not make sense for GpioInt() resource and
+must be 0. GpioInt() resource has its own means of defining it.
+
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+The GpioIo() resource unfortunately doesn't explicitly provide an initial
+state of the output pin which driver should use during its initialization.
+
+Linux tries to use common sense here and derives the state from the bias
+and polarity settings. The table below shows the expectations:
+
+=========  =============  ==============
+Pull Bias     Polarity     Requested...
+=========  =============  ==============
+Implicit     x            AS IS (assumed firmware configured for us)
+Explicit     x (no _DSD)  as Pull Bias (Up == High, Down == Low),
+                          assuming non-active (Polarity = !Pull Bias)
+Down         Low          as low, assuming active
+Down         High         as low, assuming non-active
+Up           Low          as high, assuming non-active
+Up           High         as high, assuming active
+=========  =============  ==============
+
+That said, for our above example the both GPIOs, since the bias setting
+is explicit and _DSD is present, will be treated as active with a high
+polarity and Linux will configure the pins in this state until a driver
+reprograms them differently.
+
 It is possible to leave holes in the array of GPIOs. This is useful in
 cases like with SPI host controllers where some chip selects may be
 implemented as GPIOs and some as native signals. For example a SPI host
@@ -112,8 +138,8 @@ Example::
   Package () {
       "gpio-line-names",
       Package () {
-          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
-          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD",
+          "MUX7_IO", "LVL_C_A1", "MUX0_IO", "SPI1_MISO",
       }
   }
 
@@ -137,7 +163,7 @@ to the GPIO lines it is going to use and provide the GPIO subsystem with a
 mapping between those names and the ACPI GPIO resources corresponding to them.
 
 To do that, the driver needs to define a mapping table as a NULL-terminated
-array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+array of struct acpi_gpio_mapping objects that each contains a name, a pointer
 to an array of line data (struct acpi_gpio_params) objects and the size of that
 array.  Each struct acpi_gpio_params object consists of three fields,
 crs_entry_index, line_index, active_low, representing the index of the target
@@ -154,13 +180,14 @@ question would look like this::
   static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
     { "reset-gpios", &reset_gpio, 1 },
     { "shutdown-gpios", &shutdown_gpio, 1 },
-    { },
+    { }
   };
 
 Next, the mapping table needs to be passed as the second argument to
-acpi_dev_add_driver_gpios() that will register it with the ACPI device object
-pointed to by its first argument.  That should be done in the driver's .probe()
-routine.  On removal, the driver should unregister its GPIO mapping table by
+acpi_dev_add_driver_gpios() or its managed analogue that will
+register it with the ACPI device object pointed to by its first
+argument. That should be done in the driver's .probe() routine.
+On removal, the driver should unregister its GPIO mapping table by
 calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
 table was previously registered.
 
@@ -191,12 +218,12 @@ The driver might expect to get the right GPIO when it does::
 but since there is no way to know the mapping between "reset" and
 the GpioIo() in _CRS desc will hold ERR_PTR(-ENOENT).
 
-The driver author can solve this by passing the mapping explictly
-(the recommended way and documented in the above chapter).
+The driver author can solve this by passing the mapping explicitly
+(this is the recommended way and it's documented in the above chapter).
 
 The ACPI GPIO mapping tables should not contaminate drivers that are not
 knowing about which exact device they are servicing on. It implies that
-the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain
+the ACPI GPIO mapping tables are hardly linked to an ACPI ID and certain
 objects, as listed in the above chapter, of the device in question.
 
 Getting GPIO descriptor
@@ -229,5 +256,5 @@ Case 2 explicitly tells GPIO core to look for resources in _CRS.
 Be aware that gpiod_get_index() in cases 1 and 2, assuming that there
 are two versions of ACPI device description provided and no mapping is
 present in the driver, will return different resources. That's why a
-certain driver has to handle them carefully as explained in previous
+certain driver has to handle them carefully as explained in the previous
 chapter.
diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst b/Documentation/firmware-guide/acpi/method-tracing.rst
@@ -98,7 +98,7 @@ subject to change::
    [    0.188903]   exdebug-0398 ex_trace_point        : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
 
 Developers can utilize these special log entries to track the AML
-interpretion, thus can aid issue debugging and performance tuning. Note
+interpretation, thus can aid issue debugging and performance tuning. Note
 that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
 macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
 "AML tracer" logs.

diff --git a/Documentation/networking/netdev-FAQ.rst b/Documentation/networking/netdev-FAQ.rst
@@ -110,7 +110,7 @@ Q: I sent a patch and I'm wondering what happened to it?
 Q: How can I tell whether it got merged?
 A: Start by looking at the main patchworks queue for netdev:
 
-  http://patchwork.ozlabs.org/project/netdev/list/
+  https://patchwork.kernel.org/project/netdevbpf/list/
 
 The "State" field will tell you exactly where things are at with your
 patch.
@@ -152,7 +152,7 @@ networking subsystem, and then hands them off to Greg.
 
 There is a patchworks queue that you can see here:
 
-  http://patchwork.ozlabs.org/bundle/davem/stable/?state=*
+  https://patchwork.kernel.org/bundle/netdev/stable/?state=*
 
 It contains the patches which Dave has selected, but not yet handed off
 to Greg.  If Greg already has the patch, then it will be here:

diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
@@ -247,8 +247,8 @@ Some of the interface modes are described below:
     speeds (see below.)
 
 ``PHY_INTERFACE_MODE_2500BASEX``
-    This defines a variant of 1000BASE-X which is clocked 2.5 times faster,
-    than the 802.3 standard giving a fixed bit rate of 3.125Gbaud.
+    This defines a variant of 1000BASE-X which is clocked 2.5 times as fast
+    as the 802.3 standard, giving a fixed bit rate of 3.125Gbaud.
 
 ``PHY_INTERFACE_MODE_SGMII``
     This is used for Cisco SGMII, which is a modification of 1000BASE-X

diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst
@@ -39,7 +39,7 @@ Procedure for submitting patches to the -stable tree
    submission guidelines as described in
    :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
    after first checking the stable networking queue at
-   https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
    to ensure the requested patch is not already queued up.
  - Security patches should not be handled (solely) by the -stable review
    process but should follow the procedures in

diff --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst b/Documentation/translations/it_IT/process/stable-kernel-rules.rst
@@ -46,7 +46,7 @@ Procedura per sottomettere patch per i sorgenti -stable
    :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst <it_netdev-FAQ>`;
    ma solo dopo aver verificato al seguente indirizzo che la patch non sia
    già in coda:
-   https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state=*&q=&archive=
+   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
  - Una patch di sicurezza non dovrebbero essere gestite (solamente) dal processo
    di revisione -stable, ma dovrebbe seguire le procedure descritte in
    :ref:`Documentation/translations/it_IT/admin-guide/security-bugs.rst <it_securitybugs>`.

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
@@ -6367,7 +6367,7 @@ accesses that would usually trigger a #GP by KVM into the guest will
 instead get bounced to user space through the KVM_EXIT_X86_RDMSR and
 KVM_EXIT_X86_WRMSR exit notifications.
 
-8.25 KVM_X86_SET_MSR_FILTER
+8.27 KVM_X86_SET_MSR_FILTER
 ---------------------------
 
 :Architectures: x86
@@ -6381,8 +6381,7 @@ In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to
 trap and emulate MSRs that are outside of the scope of KVM as well as
 limit the attack surface on KVM's MSR emulation code.
 
-
-8.26 KVM_CAP_ENFORCE_PV_CPUID
+8.28 KVM_CAP_ENFORCE_PV_CPUID
 -----------------------------
 
 Architectures: x86