Add files via upload

SASProject/SASGenderRecognition/build.xml

@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- You may freely edit this file. See commented blocks below for -->
+<!-- some examples of how to customize the build. -->
+<!-- (If you delete it and reopen the project it will be recreated.) -->
+<!-- By default, only the Clean and Build commands use this build script. -->
+<!-- Commands such as Run, Debug, and Test only use this build script if -->
+<!-- the Compile on Save feature is turned off for the project. -->
+<!-- You can turn off the Compile on Save (or Deploy on Save) setting -->
+<!-- in the project's Project Properties dialog box.-->
+<project name="SASGenderRecognition" default="default" basedir=".">
+    <description>Builds, tests, and runs the project SASGenderRecognition.</description>
+    <import file="nbproject/build-impl.xml"/>
+    <!--
+
+    There exist several targets which are by default empty and which can be 
+    used for execution of your tasks. These targets are usually executed 
+    before and after some main targets. They are: 
+
+      -pre-init:                 called before initialization of project properties
+      -post-init:                called after initialization of project properties
+      -pre-compile:              called before javac compilation
+      -post-compile:             called after javac compilation
+      -pre-compile-single:       called before javac compilation of single file
+      -post-compile-single:      called after javac compilation of single file
+      -pre-compile-test:         called before javac compilation of JUnit tests
+      -post-compile-test:        called after javac compilation of JUnit tests
+      -pre-compile-test-single:  called before javac compilation of single JUnit test
+      -post-compile-test-single: called after javac compilation of single JUunit test
+      -pre-jar:                  called before JAR building
+      -post-jar:                 called after JAR building
+      -post-clean:               called after cleaning build products
+
+    (Targets beginning with '-' are not intended to be called on their own.)
+
+    Example of inserting an obfuscator after compilation could look like this:
+
+        <target name="-post-compile">
+            <obfuscate>
+                <fileset dir="${build.classes.dir}"/>
+            </obfuscate>
+        </target>
+
+    For list of available properties check the imported 
+    nbproject/build-impl.xml file. 
+
+
+    Another way to customize the build is by overriding existing main targets.
+    The targets of interest are: 
+
+      -init-macrodef-javac:     defines macro for javac compilation
+      -init-macrodef-junit:     defines macro for junit execution
+      -init-macrodef-debug:     defines macro for class debugging
+      -init-macrodef-java:      defines macro for class execution
+      -do-jar:                  JAR building
+      run:                      execution of project 
+      -javadoc-build:           Javadoc generation
+      test-report:              JUnit report generation
+
+    An example of overriding the target for project execution could look like this:
+
+        <target name="run" depends="SASGenderRecognition-impl.jar">
+            <exec dir="bin" executable="launcher.exe">
+                <arg file="${dist.jar}"/>
+            </exec>
+        </target>
+
+    Notice that the overridden target depends on the jar target and not only on 
+    the compile target as the regular run target does. Again, for a list of available 
+    properties which you can use, check the target you are overriding in the
+    nbproject/build-impl.xml file. 
+
+    -->
+</project>

SASProject/SASGenderRecognition/build/classes/AddFemale.py

@@ -0,0 +1,57 @@
+import sys
+import matplotlib.pyplot as plt
+import scipy.io.wavfile as wavfile
+from scipy import fftpack
+from scipy.fftpack import fft, fftfreq
+from scipy.signal import decimate
+import numpy as np
+
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\avg_thres_female.txt","r+")
+s = file1.readlines()
+avg_thres = (float)(s[-1])
+file1.close()
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\total_num_of_data_female.txt","r+")
+s = file1.readlines()
+total_files = (int)(s[0])
+file1.close()
+
+avg_thres = avg_thres + (float)(sys.argv[1])
+total_files = total_files + 1
+
+thres_freq = avg_thres / total_files
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\avg_thres_female.txt', 'w+')
+f.write((str)(avg_thres))
+f.close()
+
+
+#write sigma(fi)
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\total_num_of_data_female.txt', 'w+')
+f.write((str)(total_files))
+f.close()
+
+
+#write thres_freq
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\thres_freq_female.txt', 'w+')
+f.write((str)(thres_freq))
+f.close()
+
+
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\female_graph.txt","a+")
+file1.write(sys.argv[1] + "\n")
+file1.close()
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\min_freq_female.txt', 'r+')
+x = f.readlines()
+y = (float)(x[0])
+if((float)(sys.argv[1]) < y):
+    y = (float)(sys.argv[1])
+
+f.close()
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataFemale\\min_freq_female.txt', 'w+')
+f.write((str)(y))
+f.close()

SASProject/SASGenderRecognition/build/classes/AddMale.py

@@ -0,0 +1,57 @@
+import sys
+import matplotlib.pyplot as plt
+import scipy.io.wavfile as wavfile
+from scipy import fftpack
+from scipy.fftpack import fft, fftfreq
+from scipy.signal import decimate
+import numpy as np
+
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\avg_thres_male.txt","r+")
+s = file1.readlines()
+avg_thres = (float)(s[-1])
+file1.close()
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\total_num_of_data_male.txt","r+")
+s = file1.readlines()
+total_files = (int)(s[0])
+file1.close()
+
+avg_thres = avg_thres + (float)(sys.argv[1])
+total_files = total_files + 1
+
+thres_freq = avg_thres / total_files
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\avg_thres_male.txt', 'w+')
+f.write((str)(avg_thres))
+f.close()
+
+
+#write sigma(fi)
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\total_num_of_data_male.txt', 'w+')
+f.write((str)(total_files))
+f.close()
+
+
+#write thres_freq
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\thres_freq_male.txt', 'w+')
+f.write((str)(thres_freq))
+f.close()
+
+
+
+file1 = open("F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\male_graph.txt","a+")
+file1.write(sys.argv[1] + "\n")
+file1.close()
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\max_freq_male.txt', 'r+')
+x = f.readlines()
+y = (float)(x[0])
+if((float)(sys.argv[1]) > y):
+    y = (float)(sys.argv[1])
+
+f.close()
+
+f = open('F:\Studies\Sem-3\SignalAndSystems\SAS Project\DataMale\\max_freq_male.txt', 'w+')
+f.write((str)(y))
+f.close()