Design +X Cover PCB

[maestroque]

• Umbilical connectors on both sides to be in par with the cable routing observations (two rows on the inside)
• Umbilical connectors on the outside to be accessible from the testpod window.
• ABF connector change to a locking one, potentially with screws.
• Check the adequacy of the ground plane around the GNSS antenna
• Add Kill resistors circuit
• Add RBF connector on the cover
• Routing
• Rotate STR Tracker Cutout

[maestroque]

ABF on +X Cover, PeakSat assembly. There is slack for the ABF cables of 7.4mm

[maestroque]

Clearence from ExoPod NOVA

More than 1cm clearence for the screwdriver bit to lock the ABF. All other connectors are easily accessible