[Feature Request] Add OS04D10 sensor driver support for SSC377D (Infinity6C)

[byfaruk]

Feature Request: OS04D10 Sensor Driver Support

Summary

Please add driver support for the OmniVision OS04D10 sensor on the SigmaStar SSC377D (Infinity6C) platform.

Current situation

• The sensor_os04d10_mipi.ko driver is not present in the current OpenIPC build for SSC377D / Infinity6C.
• Cameras using the OS04D10 sensor with SSC377D SoC cannot be flashed with stock OpenIPC firmware without a working sensor driver.

Hardware details

• SoC: SigmaStar SSC377D (Infinity6C family)
• Sensor: OmniVision OS04D10 (4MP, MIPI CSI-2)
• Interface: MIPI 2-lane, 10-bit
• Bayer pattern: BGGR
• Typical resolution: 2560x1440 @ 30fps

Why this matters

The OS04D10 + SSC377D combination is widely used in low-cost 4MP IP cameras currently entering the market. Lack of driver support forces users to stay on stock (often insecure) vendor firmware.

What we need

1. sensor_os04d10_mipi.ko kernel module built against the Infinity6C BSP
2. Matching IQ/tuning bin file (os04d10.bin)
3. Sensor entry in majestic/ISP config

Additional info

• Stock vendor firmware works correctly with this sensor (colors, IR-cut, AWB all functional), confirming the hardware is standard.
• I am able to test builds on real hardware and provide logs / dumps if a developer picks this up.

Thank you!

[flyrouter]

Good afternoon
Thank you for your interest in our project
At the moment, only a similar driver is publicly available in our repositories.
https://github.com/OpenIPC/sensors/blob/master/sigmastar/infinity6c/sensor_os04a10_mipi.c
If you want to financially invest in research through the OpenCollective platform or in another way, you can discuss this in a PM with the key developers of our project.

[byfaruk]

Thank you for the quick response and for pointing me to the existing os04a10_mipi driver as a reference.
I'm willing to financially support this work. Could you please let me know which developer I should contact via PM to discuss the scope, timeline, and payment details? I'd like to move forward as soon as possible so we can get proper OS04D10 support for the SSC377D / Infinity6C platform.
As mentioned, I can also provide hardware for testing, logs, and register dumps during development.
Looking forward to your reply.

[byfaruk]

https://github.com/OpenIPC/sensors/blob/master/sigmastar/infinity6c/sensor_os04a10_mipi.c @flyrouter
Problem: OpenIPC OS04D10 image is hazy/grainy vs. sharp on UniView stock firmware. Root cause: /etc/sensors/os04d10.bin is actually the OS04A10 IQ file (wrong tuning). Majestic expects ISP version 4 but file is version 2 → soft ISP bypass → no proper denoise/sharpness curve. No real OS04D10 IQ bin exists in OpenIPC repo. Workaround so far: testing other sensors' IQ bins (imx335, sc401ai) as substitutes — partial improvement only.

sahacam-openipc.tar.gz

[flyrouter]

You can turn on the IQ Server and use the utility to configure exactly what you need:

https://openipc.org/utilities
SigmaStarCam IQTool v2.01.114

[ZigFisher]

Thank you, we will review your archive next week.

[byfaruk]

@ZigFisher Image is not sharp and has strong light flare/vertical streaks. Issue is not dome/lens contamination — likely caused by sensor driver mismatch or ISP tuning problem (too high AGC and wrong DWDR settings). OpenIPC may be using wrong sensor driver for OS04D10, causing incorrect register configuration and poor image quality. Could you prepare a sensor-equipped device for me based on the information I've shared?