add exagear-desktop-rpi3 project

exagear-desktop-rpi3/README

@@ -0,0 +1,56 @@
+###################################################################################
+# Eltechs ExaGear Desktop 2.0.                                                    #
+#                                                                                 #
+# Copyright (c) 2017 "Elbrus Technologies" LLC. All rights reserved.              #
+###################################################################################
+#
+# Descripton:
+# ExaGear Desktop is a virtual machine that implements virtual x86 Linux 
+# container on ARM and allows you to run Intel x86 applications directly on 
+# ARM. For more information please see http://eltechs.com/product/exagear-desktop/ 
+#
+# On Raspberry Pi 2 and Raspberry Pi 3 ExaGear supports hardware graphics 
+# acceleration. This feature significantly increases performance of x86 
+# applications that use OpenGL up to version 2.1.
+#
+# Configure hardware graphics acceleration on Raspberry Pi 2 and Raspberry Pi 3:
+# To to enable hardware graphics acceleration on the host system run the following 
+# command from the command line terminal:
+# $ sudo raspi-config
+# You should see a blue screen with options in a gray box in the centre. Select 
+# 'Update this tool to the latest version' and wait until the update is performed. 
+# When blue screen with options will pop-up again select 'Advanced Options', then 
+# select 'GL Driver' and then 'GL (Full KMS) OpenGL desktop driver with full KMS'. 
+# When configuration is finished you will see the following message: 
+# "Full KMS GL driver is enabled".
+# Select <Ok> and then <Finish> and the raspi-config tool will ask you if you 
+# would like to reboot. Select <Yes> to reboot the system and apply configuration 
+# changes. 
+#
+# Installation:
+# Run installation script in a directory with deb packages and one license key:
+# $ sudo ./install-exagear.sh
+# This script installs guest x86 image that better fits your host operating system.
+# Sometimes you might need to install guest x86 Ubuntu image, for example Spotify 
+# can run with the guest Ubuntu only. To force install the guest x86 Ubuntu run 
+# installation script with following option:
+# $ sudo ./install-exagear.sh ubuntu-1404
+#
+# Running:
+# $ exagear
+# Starting the shell in the guest image /opt/exagear/images/<guest_system_version>
+# $ arch
+# i686
+#
+# You are now inside the x86 world. You can use this guest shell as if it were 
+# running on an x86 machine. Inside the guest session you can install Wine from 
+# apt-get repositories:
+# $ sudo apt-get install wine 
+# To exit from the guest session use 'exit' command.
+#
+# For more details read Eltechs_ExaGear_Desktop_user_guide.pdf.
+#
+# Support:
+# Please send e-mail on support@eltechs.com
+#
+#

exagear-desktop-rpi3/install-exagear.sh

@@ -0,0 +1,258 @@
+#!/bin/bash
+
+function retback {
+	popd > /dev/null
+}
+trap retback EXIT
+
+pushd `dirname $0` > /dev/null
+
+
+UBT_PACKAGE_NAME_2G="exagear-mem2g_*-1_armhf.deb"
+UBT_PACKAGE_NAME_3G="exagear_*-1_armhf.deb"
+UBT_PACKAGE_NAME_LEGACY_2G="exagear-legacy-mem2g_*-1_armhf.deb"
+UBT_PACKAGE_NAME_LEGACY_3G="exagear-legacy_*-1_armhf.deb"
+UBT_PACKAGE_NAME_ARM7_8="exagear-armv8_*-1_arm64.deb"
+
+GUEST_IMAGE_PACKAGE_NAME_DEBIAN_7="exagear-guest-debian-7_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_DEBIAN_7_WINE2G="exagear-guest-debian-7-wine2g_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_DEBIAN_8="exagear-guest-debian-8_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1204="exagear-guest-ubuntu-1204lts_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1404="exagear-guest-ubuntu-1404lts_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1504="exagear-guest-ubuntu-1504_*_all.deb"
+GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1604="exagear-guest-ubuntu-1604_*_all.deb"
+
+PK_FILE_NAME="pk-*.key"
+
+function file_exists {
+    stat $1 &> /dev/null
+}
+
+function get_host_system_type {
+
+    HOST_OS=`cat /etc/lsb-release 2>/dev/null | egrep "^DISTRIB_ID\=" | awk -F= '{print $2}' |  tr '[:upper:]' '[:lower:]'`
+    if [ -n "$HOST_OS" ] ; then
+        return
+    fi
+
+    HOST_OS=`cat /etc/os-release | egrep "^ID\=" | awk -F= '{print $2}' |  tr '[:upper:]' '[:lower:]'`
+    if [ -n "$HOST_OS" ] ; then
+        if [ "$HOST_OS" == "debian" -o "$HOST_OS" == "ubuntu" ] ; then
+            return
+        fi
+    fi
+
+    HOST_OS=`cat /etc/os-release | egrep "^ID_LIKE\=" | awk -F= '{print $2}' |  tr '[:upper:]' '[:lower:]'`
+    if [ -n "$HOST_OS" ] ; then
+        return
+    fi
+
+    HOST_OS="default"
+}
+
+function check_if_raspbian_23 {
+    RASPBIAN=`cat /etc/issue | tr '[:upper:]' '[:lower:]' | grep 'raspbian'`
+    if ! [ -z "$RASPBIAN" ] && [ "$ARCH" == 'armv7l' ]; then
+	RASPBIAN23='y'
+    fi
+}
+
+function get_host_system_version {
+    if [ "$HOST_OS" == "debian"  ] ; then
+        HOST_OS_VERSION=`cat /etc/*-release | egrep "^VERSION_ID\=" | awk -F= '{print $2}' | tr '[:upper:]' '[:lower:]' | tr -d "\"" `
+        if [ -z "$HOST_OS_VERSION" ] ; then
+    	    if grep "jessie" /etc/*-release; then
+    		HOST_OS_VERSION="8"
+    	    fi
+    	fi
+
+    elif [ "$HOST_OS" == "ubuntu" ] ; then
+        HOST_OS_VERSION=`cat /etc/*-release | egrep "^DISTRIB_RELEASE\=" | awk -F= '{print $2}' |  awk -F. '{print $1}' | tr '[:upper:]' '[:lower:]'`
+    fi
+
+    if [ -z "$HOST_OS_VERSION" ] ; then
+        HOST_OS_VERSION="default"
+    fi
+}
+
+function get_arch {
+    ARCH=`arch`
+    echo "ARCH=$ARCH"
+}
+
+function check_guest_image_already_installed {
+    INSTALLED_GUEST_IMAGE=`ls /opt/exagear/images/ 2>/dev/null | head -n 1`
+
+    if [ ! -z "$INSTALLED_GUEST_IMAGE" ]; then
+	echo "It is not possible to install guest image package as you already have guest image package installed."
+	echo "Installed guest image package name is exagear-guest-$INSTALLED_GUEST_IMAGE. "
+	echo "To uninstall current guest image package use ' sudo apt-get purge exagear-guest-$INSTALLED_GUEST_IMAGE '"
+	echo "Note that all x86 applications installed inside the current guest image will be also deleted."
+	exit 1
+    fi
+}
+
+function check_free_space {
+	FREE_SPACE_MB=`df -m /opt/ | awk 'NR==2 {print $4}'`
+	INSTALL_BLOCKDEV=`df -m /opt/ | awk 'NR==2 {print $1}'`
+	if [ $FREE_SPACE_MB -lt 1500 ]; then
+		echo "No enough space on your $INSTALL_BLOCKDEV file system. 1500M is required for exagear. You got only ${FREE_SPACE_MB}M. Please perform some cleanup or resize partition and try again."
+		exit 1
+	fi
+}
+
+while test ${#} -gt 0
+do
+    if [ "$1" == "ubuntu-1404" ]
+    then
+	UBUNTU_14_FORCED='y'
+    elif [ "$1" == "--without-opengl" ]
+    then
+	WITHOUT_GL_FORCED='y'
+    else
+	echo "Invalid arument: $1"
+	exit 1
+    fi
+    shift
+done
+
+uid=$(id -u)
+if [ "$uid" != "0" ] ; then
+    echo "Must be root"
+    exit 1
+fi
+
+test_binary=$(mktemp)
+echo f0VMRgEBAQAAAAAAAAAAAAIAKAABAAAAVIAAADQAAADIAAAAAAIABTQAIAABACgABgADAAEAAAAAAAAAAIAAAACAAACAAAAAgAAAAAUAAAAAgAAACgKg4wEaoOMAIKDjMjCg48BwoOMAAADvCgJQ4wAAoAMBAKATAXCg4wAAAO9BEwAAAGFlYWJpAAEJAAAABgEIAQAuc3ltdGFiAC5zdHJ0YWIALnNoc3RydGFiAC50ZXh0AC5BUk0uYXR0cmlidXRlcwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAGwAAAAEAAAAGAAAAVIAAAFQAAAAsAAAAAAAAAAAAAAAEAAAAAAAAACEAAAADAABwAAAAAAAAAACAAAAAFAAAAAAAAAAAAAAAAQAAAAAAAAARAAAAAwAAAAAAAAAAAAAAlAAAADEAAAAAAAAAAAAAAAEAAAAAAAAAAQAAAAIAAAAAAAAAAAAAALgBAADgAAAABQAAAAYAAAAEAAAAEAAAAAkAAAADAAAAAAAAAAAAAACYAgAAWwAAAAAAAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAFSAAAAAAAAAAwABAAAAAAAAAAAAAAAAAAMAAgABAAAAAAAAAAAAAAAEAPH/DAAAAFSAAAAAAAAAAAABAAAAAAAAAAAAAAAAAAQA8f8PAAAAgAABAAAAAAAQAAEAGgAAAIAAAQAAAAAAEAABACgAAACAAAEAAAAAABAAAQA0AAAAVIAAAAAAAAAQAAEAOwAAAIAAAQAAAAAAEAABAEcAAACAAAEAAAAAABAAAQBPAAAAgAABAAAAAAAQAAEAVgAAAIAAAQAAAAAAEAABAABtZW1fdGVzdC5vACRhAF9ic3NfZW5kX18AX19ic3Nfc3RhcnRfXwBfX2Jzc19lbmRfXwBfc3RhcnQAX19ic3Nfc3RhcnQAX19lbmRfXwBfZWRhdGEAX2VuZAA= | base64 --decode > $test_binary
+chmod +x $test_binary
+$test_binary
+test_bin_ret=$?
+rm -f $test_binary
+
+if [ "$test_bin_ret" -eq  '0' ]; then
+    is_3g="1"
+    echo "System memory configuration is determined as 3g/1g"
+else
+    is_3g="0"
+    echo "System memory configuration is determined as 2g/2g"
+fi
+
+get_host_system_type
+get_host_system_version
+get_arch
+check_guest_image_already_installed
+check_free_space
+check_if_raspbian_23
+
+if [ "$ARCH" == "armv7l" ]; then
+    export USE_DSOUND_SERVER='y'
+fi
+
+if [ "$RASPBIAN23" == 'y' ]
+then
+    if ! [ "$WITHOUT_GL_FORCED" == 'y' ]
+    then
+	export USE_GL='y'
+    fi
+fi
+
+if [ "$is_3g" == "1" ]; then
+    if [ "$ARCH" ==  "armv6l" ] ; then
+        UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_LEGACY_3G
+    elif [ "$ARCH" == "armv7l" ] ; then
+        UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_3G
+    elif [ "$ARCH" == "aarch64" ] ; then
+	UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_ARM7_8
+    elif [ "$ARCH" == "armv8l" ] ; then
+        UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_ARM7_8
+    else
+        echo "Only armv7, aarch64 and armv6 host arch are supported for 3g/1g memory split"
+        exit 1
+    fi
+else
+    if [ "$ARCH" ==  "armv6l" ] ; then
+        UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_LEGACY_2G
+    elif [ "$ARCH" == "armv7l" ] ; then
+        UBT_PACKAGE_NAME=$UBT_PACKAGE_NAME_2G
+    else
+        echo "Only armv7 and armv6 arch are supported for 2g/2g memory split"
+        exit 1
+    fi    
+fi
+
+if [ "$UBUNTU_14_FORCED" == 'y' ] ; then
+    # ubuntu-1404 is able to be forced to install via './install-exagear.sh ubuntu-1404'
+    GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1404
+else
+    if [ "$HOST_OS" == "debian" ] ; then
+        if [ "$HOST_OS_VERSION" == "7" ] ; then
+            if [ "$is_3g" == "1" ]; then
+                GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_DEBIAN_7
+            else
+                GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_DEBIAN_7_WINE2G
+            fi
+        else
+            GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_DEBIAN_8
+        fi
+    elif [ "$HOST_OS" == "ubuntu" ] ; then
+        if [ "$HOST_OS_VERSION" == "12" ] ; then
+            GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1204
+        elif [ "$HOST_OS_VERSION" == "14" ] ; then
+            GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1404
+        elif [ "$HOST_OS_VERSION" == "15" ] ; then
+            GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1504
+        else
+            GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1604
+        fi
+    else
+        GUEST_IMAGE_PACKAGE_NAME=$GUEST_IMAGE_PACKAGE_NAME_UBUNTU_1404
+    fi
+fi
+
+echo "HOST OS: $HOST_OS"
+echo "HOST OS VERSION: $HOST_OS_VERSION"
+echo "EXAGEAR package: $UBT_PACKAGE_NAME"
+echo "EXAGEAR guest image package: '$GUEST_IMAGE_PACKAGE_NAME'"
+
+if ! file_exists "$UBT_PACKAGE_NAME" ; then
+    echo "Put the translator package to the current directory."
+    echo "The package is named ${UBT_PACKAGE_NAME/\*/NNNN}."
+    exit 1
+fi
+
+if ! file_exists "$GUEST_IMAGE_PACKAGE_NAME" ; then
+    echo "Put the guest image package to the current directory."
+    echo "The package is named ${GUEST_IMAGE_PACKAGE_NAME/\*/N}."
+    exit 1
+fi
+
+if ! file_exists "$PK_FILE_NAME" ; then
+    echo "Put a primary key file to the current directory."
+    echo "Primary key files are named ${PK_FILE_NAME/\*/NNNNNN}"
+    exit 1
+fi
+
+echo "Installing prerequisites..."
+apt-get update
+for prereq in bash coreutils findutils realpath curl binfmt-support cron; do
+    apt-get -y install $prereq || exit 1
+done
+
+echo "Installing the binary translator..."
+dpkg -i $UBT_PACKAGE_NAME || exit 1
+
+echo "Installing the guest image..."
+dpkg -i $GUEST_IMAGE_PACKAGE_NAME || exit 1
+
+if [ "$USE_DSOUND_SERVER" == "y" ]
+then
+    dpkg -i exagear-dsound-server_*_armhf.deb
+fi
+
+echo "Installing the primary key..."
+mv $PK_FILE_NAME /opt/exagear/lic/ || exit 1
+
+echo "Activating the copy of ExaGear..."
+/opt/exagear/bin/actool || exit 1
+
+echo "Done!"

exagear-desktop-rpi3/pk-000000013078.key

@@ -0,0 +1,6 @@
+VUJUTAAAAAAWMwAAAAAAAOmCfeUa6u83UuexNpFnwvROYZdMZ+aP4EZ9jac5gzzfkWlIzOAIa4jeZYNsZ9Kn3sIF/XKBq+8rRUJDXzkuKqQH3f9yudtufS/D5o3TjFRmjDx6d5cSIorcNv0szF3ZSY0VkgcVw8ylDPoXibQGsfz4NN20tULN6bbgGbfS71in
+
+-------------------- Key info --------------------
+Distributor: eltechs-ext
+Enabled features: v1 f_x86-32_v1 f_x86-64_v1 b_arm32_v1 b_arm64_v1
+Valid through: 32503680000