Merge remote-tracking branches 'asoc/topic/max9867', 'asoc/topic/mtk'…

…, 'asoc/topic/nau8540', 'asoc/topic/nau8825' and 'asoc/topic/omap' into asoc-next

.mailmap

@@ -137,6 +137,7 @@ Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
+Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sam Ravnborg <sam@mars.ravnborg.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
@@ -150,10 +151,13 @@ Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Subhash Jadavani <subhashj@codeaurora.org>
 Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
+Thomas Pedersen <twp@codeaurora.org>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	"irq" and "wakeup" names are recognized by I2C core, other names are
 	left to individual drivers.
 
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
 
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
 Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
 interrupt for the device. If "wakeup" interrupt name is not present in the
 binding, then primary interrupt will be used as wakeup interrupt.

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

Documentation/devicetree/bindings/net/phy.txt

@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt

@@ -4,6 +4,7 @@ Required properties:
 - compatible = "mediatek,mt2701-audio";
 - reg: register location and size
 - interrupts: Should contain AFE interrupt
+- power-domains: should define the power domain
 - clock-names: should have these clock names:
 		"infra_sys_audio_clk",
 		"top_audio_mux1_sel",
@@ -58,6 +59,7 @@ Example:
 		      <0 0x112A0000 0 0x20000>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 		clocks = <&infracfg CLK_INFRA_AUDIO>,
 			 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
 			 <&topckgen CLK_TOP_AUD_MUX2_SEL>,

Documentation/devicetree/bindings/sound/nau8540.txt

@@ -0,0 +1,16 @@
+NAU85L40 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "nuvoton,nau8540"
+
+  - reg : the I2C address of the device.
+
+Example:
+
+codec: nau8540@1c {
+       compatible = "nuvoton,nau8540";
+       reg = <0x1c>;
+};

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/filesystems/proc.txt

@@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 4.1)
+Table 1-2: Contents of the status files (as of 4.8)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
+ Umask                       file mode creation mask
  State                       state (R is running, S is sleeping, D is sleeping
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
@@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1)
  TracerPid                   PID of process tracing this process (0 if not)
  Uid                         Real, effective, saved set, and  file system UIDs
  Gid                         Real, effective, saved set, and  file system GIDs
- Umask                       file mode creation mask
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
  NStgid                      descendant namespace thread group ID hierarchy
@@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1)
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
+ VmPin                       pinned memory size
  VmHWM                       peak resident set size ("high water mark")
  VmRSS                       size of memory portions. It contains the three
                              following parts (VmRSS = RssAnon + RssFile + RssShmem)

Documentation/power/states.txt

@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.
 

Documentation/vm/page_frags

@@ -0,0 +1,42 @@
+Page fragments
+--------------
+
+A page fragment is an arbitrary-length arbitrary-offset area of memory
+which resides within a 0 or higher order compound page.  Multiple
+fragments within that page are individually refcounted, in the page's
+reference counter.
+
+The page_frag functions, page_frag_alloc and page_frag_free, provide a
+simple allocation framework for page fragments.  This is used by the
+network stack and network device drivers to provide a backing region of
+memory for use as either an sk_buff->head, or to be used in the "frags"
+portion of skb_shared_info.
+
+In order to make use of the page fragment APIs a backing page fragment
+cache is needed.  This provides a central point for the fragment allocation
+and tracks allows multiple calls to make use of a cached page.  The
+advantage to doing this is that multiple calls to get_page can be avoided
+which can be expensive at allocation time.  However due to the nature of
+this caching it is required that any calls to the cache be protected by
+either a per-cpu limitation, or a per-cpu limitation and forcing interrupts
+to be disabled when executing the fragment allocation.
+
+The network stack uses two separate caches per CPU to handle fragment
+allocation.  The netdev_alloc_cache is used by callers making use of the
+__netdev_alloc_frag and __netdev_alloc_skb calls.  The napi_alloc_cache is
+used by callers of the __napi_alloc_frag and __napi_alloc_skb calls.  The
+main difference between these two calls is the context in which they may be
+called.  The "netdev" prefixed functions are usable in any context as these
+functions will disable interrupts, while the "napi" prefixed functions are
+only usable within the softirq context.
+
+Many network device drivers use a similar methodology for allocating page
+fragments, but the page fragments are cached at the ring or descriptor
+level.  In order to enable these cases it is necessary to provide a generic
+way of tearing down a page cache.  For this reason __page_frag_cache_drain
+was implemented.  It allows for freeing multiple references from a single
+page via a single call.  The advantage to doing this is that it allows for
+cleaning up the multiple references that were added to a page in order to
+avoid calling get_page per allocation.
+
+Alexander Duyck, Nov 29, 2016.