Add files via upload

Sd2Card.h

@@ -0,0 +1,204 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * \file
+ * \brief Sd2Card class for V2 SD/SDHC cards
+ */
+
+/**
+ * Arduino Sd2Card Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+#ifndef _SD2CARD_H_
+#define _SD2CARD_H_
+
+#include "SdFatConfig.h"
+#include "SdInfo.h"
+
+// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
+uint8_t const SPI_FULL_SPEED = 0,         // Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate().
+              SPI_HALF_SPEED = 1,         // Set SCK rate to F_CPU/4. See Sd2Card::setSckRate().
+              SPI_QUARTER_SPEED = 2,      // Set SCK rate to F_CPU/8. See Sd2Card::setSckRate().
+              SPI_EIGHTH_SPEED = 3,       // Set SCK rate to F_CPU/16. See Sd2Card::setSckRate().
+              SPI_SIXTEENTH_SPEED = 4;    // Set SCK rate to F_CPU/32. See Sd2Card::setSckRate().
+
+uint16_t const SD_INIT_TIMEOUT = 2000,    // init timeout ms
+               SD_ERASE_TIMEOUT = 10000,  // erase timeout ms
+               SD_READ_TIMEOUT = 300,     // read timeout ms
+               SD_WRITE_TIMEOUT = 600;    // write time out ms
+
+// SD card errors
+uint8_t const SD_CARD_ERROR_CMD0 = 0X1,                 // timeout error for command CMD0 (initialize card in SPI mode)
+              SD_CARD_ERROR_CMD8 = 0X2,                 // CMD8 was not accepted - not a valid SD card
+              SD_CARD_ERROR_CMD12 = 0X3,                // card returned an error response for CMD12 (write stop)
+              SD_CARD_ERROR_CMD17 = 0X4,                // card returned an error response for CMD17 (read block)
+              SD_CARD_ERROR_CMD18 = 0X5,                // card returned an error response for CMD18 (read multiple block)
+              SD_CARD_ERROR_CMD24 = 0X6,                // card returned an error response for CMD24 (write block)
+              SD_CARD_ERROR_CMD25 = 0X7,                // WRITE_MULTIPLE_BLOCKS command failed
+              SD_CARD_ERROR_CMD58 = 0X8,                // card returned an error response for CMD58 (read OCR)
+              SD_CARD_ERROR_ACMD23 = 0X9,               // SET_WR_BLK_ERASE_COUNT failed
+              SD_CARD_ERROR_ACMD41 = 0XA,               // ACMD41 initialization process timeout
+              SD_CARD_ERROR_BAD_CSD = 0XB,              // card returned a bad CSR version field
+              SD_CARD_ERROR_ERASE = 0XC,                // erase block group command failed
+              SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD,   // card not capable of single block erase
+              SD_CARD_ERROR_ERASE_TIMEOUT = 0XE,        // Erase sequence timed out
+              SD_CARD_ERROR_READ = 0XF,                 // card returned an error token instead of read data
+              SD_CARD_ERROR_READ_REG = 0x10,            // read CID or CSD failed
+              SD_CARD_ERROR_READ_TIMEOUT = 0x11,        // timeout while waiting for start of read data
+              SD_CARD_ERROR_STOP_TRAN = 0x12,           // card did not accept STOP_TRAN_TOKEN
+              SD_CARD_ERROR_WRITE = 0x13,               // card returned an error token as a response to a write operation
+              SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14,    // REMOVE - not used ... attempt to write protected block zero
+              SD_CARD_ERROR_WRITE_MULTIPLE = 0x15,      // card did not go ready for a multiple block write
+              SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16,   // card returned an error to a CMD13 status check after a write
+              SD_CARD_ERROR_WRITE_TIMEOUT = 0x17,       // timeout occurred during write programming
+              SD_CARD_ERROR_SCK_RATE = 0x18,            // incorrect rate selected
+              SD_CARD_ERROR_INIT_NOT_CALLED = 0x19,     // init() not called
+              SD_CARD_ERROR_CRC = 0x20;                 // crc check error
+
+// card types
+uint8_t const SD_CARD_TYPE_SD1  = 1,                    // Standard capacity V1 SD card
+              SD_CARD_TYPE_SD2  = 2,                    // Standard capacity V2 SD card
+              SD_CARD_TYPE_SDHC = 3;                    // High Capacity SD card
+
+/**
+ * define SOFTWARE_SPI to use bit-bang SPI
+ */
+#if MEGA_SOFT_SPI
+  #define SOFTWARE_SPI
+#elif USE_SOFTWARE_SPI
+  #define SOFTWARE_SPI
+#endif
+
+// SPI pin definitions - do not edit here - change in SdFatConfig.h
+#if DISABLED(SOFTWARE_SPI)
+  // hardware pin defs
+  #define SD_CHIP_SELECT_PIN SS_PIN   // The default chip select pin for the SD card is SS.
+  // The following three pins must not be redefined for hardware SPI.
+  #define SPI_MOSI_PIN MOSI_PIN       // SPI Master Out Slave In pin
+  #define SPI_MISO_PIN MISO_PIN       // SPI Master In Slave Out pin
+  #define SPI_SCK_PIN SCK_PIN         // SPI Clock pin
+#else  // SOFTWARE_SPI
+  #define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN  // SPI chip select pin
+  #define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN      // SPI Master Out Slave In pin
+  #define SPI_MISO_PIN SOFT_SPI_MISO_PIN      // SPI Master In Slave Out pin
+  #define SPI_SCK_PIN SOFT_SPI_SCK_PIN        // SPI Clock pin
+#endif  // SOFTWARE_SPI
+
+/**
+ * \class Sd2Card
+ * \brief Raw access to SD and SDHC flash memory cards.
+ */
+class Sd2Card {
+  public:
+
+  Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
+
+  uint32_t cardSize();
+  bool erase(uint32_t firstBlock, uint32_t lastBlock);
+  bool eraseSingleBlockEnable();
+
+  /**
+   *  Set SD error code.
+   *  \param[in] code value for error code.
+   */
+  void error(uint8_t code) {errorCode_ = code;}
+
+  /**
+   * \return error code for last error. See Sd2Card.h for a list of error codes.
+   */
+  int errorCode() const {return errorCode_;}
+
+  /** \return error data for last error. */
+  int errorData() const {return status_;}
+
+  /**
+   * Initialize an SD flash memory card with default clock rate and chip
+   * select pin.  See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
+   *
+   * \return true for success or false for failure.
+   */
+  bool init(uint8_t sckRateID = SPI_FULL_SPEED,
+            pin_t chipSelectPin = SD_CHIP_SELECT_PIN);
+  bool readBlock(uint32_t block, uint8_t* dst);
+
+  /**
+   * Read a card's CID register. The CID contains card identification
+   * information such as Manufacturer ID, Product name, Product serial
+   * number and Manufacturing date.
+   *
+   * \param[out] cid pointer to area for returned data.
+   *
+   * \return true for success or false for failure.
+   */
+  bool readCID(cid_t* cid) { return readRegister(CMD10, cid); }
+
+  /**
+   * Read a card's CSD register. The CSD contains Card-Specific Data that
+   * provides information regarding access to the card's contents.
+   *
+   * \param[out] csd pointer to area for returned data.
+   *
+   * \return true for success or false for failure.
+   */
+  bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); }
+
+  bool readData(uint8_t* dst);
+  bool readStart(uint32_t blockNumber);
+  bool readStop();
+  bool setSckRate(uint8_t sckRateID);
+  /**
+   * Return the card type: SD V1, SD V2 or SDHC
+   * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
+   */
+  int type() const {return type_;}
+  bool writeBlock(uint32_t blockNumber, const uint8_t* src);
+  bool writeData(const uint8_t* src);
+  bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
+  bool writeStop();
+
+  private:
+  uint8_t chipSelectPin_,
+          errorCode_,
+          spiRate_,
+          status_,
+          type_;
+
+  // private functions
+  uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
+    cardCommand(CMD55, 0);
+    return cardCommand(cmd, arg);
+  }
+  uint8_t cardCommand(uint8_t cmd, uint32_t arg);
+
+  bool readData(uint8_t* dst, uint16_t count);
+  bool readRegister(uint8_t cmd, void* buf);
+  void chipSelectHigh();
+  void chipSelectLow();
+  void type(uint8_t value) { type_ = value; }
+  bool waitNotBusy(uint16_t timeoutMillis);
+  bool writeData(uint8_t token, const uint8_t* src);
+};
+
+#endif  // _SD2CARD_H_