Qubino

This app adds support for Qubino Z-Wave modules in Homey.

Changelog

Version 3.0.2

• Finalised SDKv2 update
• Added support for Mini Dimmer (ZMNHHD)
• Added support for Flush On/Off Thermostat 2 (ZMNKID)
• Added Flow cards for devices with thermostat mode
• Added Flow cards for devices with inputs
• Added support for Energy
• Improved stability for RGBW Dimmer (ZMNHWD)
• Improved support for Flush Shutter (ZMNHCD)
• Improved support for Flush Shutter DC (ZMNHOD)
• Improved advanced settings for all devices
• Improved Flow cards for all devices
• Various bug fixes and improvements
• Note: a breaking change had to be implemented for Flush 2 Relays (ZMNHBD). The capabilities onoff, meter_power and measure_power have been removed which can break Flows using these capabilities.
• Note: a breaking change had to be implemented for Flush Dimmer (ZMNHDA). The capability alarm_contact has been removed which can break Flows using this capability.
• Note: a breaking change had to be implemented for Smart Meter (ZMNHTD). The capabilities onoff and meter_power have been removed which can break Flows using these capabilities.

Version 2.0.10

• Added support for ZMNHWD (Flush RGBW Dimmer)
• Fixed an issue that might prevent power meter values from being updated

Version 2.0.8

• Fixed an issue that caused connected devices to dim to full brightness when being turned on by Homey (via onoff capability)
• Fixed an issue for the Flush Shutters (ZMNHCD and ZMNHOD) that might cause weird behaviour (especially i.c.w. the invert direction setting)

Version 2.0.7

• Removed ZMNHID (Flush On/Off Thermostat) Flow Cards for input 1/2/3 due to firmware issue with device

Version 2.0.6

• Fixed an issue that could cause the "invert direction" setting of some devices to malfunction

Version 2.0.5

• Update app icon

Version 2.0.4

• Added support for ZMNHYD (Smart Plug)
• Added support for ZMNHKD (Flush PWM Thermostat)

Version 2.0.3

• Added support for ZMNHID (Flush On/Off Thermostat)

Version 2.0.1

• Updated dependencies
• Updated power meter report parsers to accommodate for incomplete reports

Version 2.0.0

• Major update to SDKv2 (please note, it is advised to re-pair your devices, otherwise some functionality might break)
• Added support for roller shutters (ZMNHCD and ZMNHOD)
• Added missing configuration parameters
• Added input functionality (please note, this might require some configuration of the device, refer to the device manual, the device settings and the Flow Card hints for more information)
• Added dim duration ability on Flow Cards of devices supporting 'dimming over time'
• Added 'reset power meter' Flow Cards and button capabilities to devices that support this functionality
• Added 'calibration' button capabilities to devices that support this functionality

Version 1.1.6

• Minor bug fixes for dimming duration setting (parameter 66) for ZMNHVD1, ZMNHSD1 and ZMNHDA2

Version 1.1.0

• Add support for ZMNHDD1 (Flush Dimmer)
• Add support for ZMNHBD1 (Flush 2 Relays)
• Add support for ZMNHAD1 (Flush 1 Relay)
• Add support for ZMNHDA2 (Flush Dimmer)
• Add support for ZMNHND1 (Flush 1D Relay)
• Add support for ZMNHVD1 (Flush Dimmer 0 - 10V)
• Add support for ZMNHKD1 (Flush Heat & Cool Thermostat)
• Add support for ZMNHIA2 (Flush On/Off Thermostat)
• Add support for ZMNHTD1 (Smart Meter)
• Add support for ZMNHSD1 (DIN Dimmer)
• Known limitations:
  • ZMNHDD1 (Flush Dimmer): input 2 and 3 can not be used in Flows
  • ZMNHBD1 (Flush 2 Relays):
    • input 1 and 2 can not be used in Flows
    • power consumption for multichannel nodes not reporting
    • on/off state for multichannel nodes not reporting
  • ZMNHAD1 (Flush 1 Relay): input 2 and 3 can not be used in Flows
  • ZMNHKD1 (Flush Heat & Cool Thermostat): input 2 and 3 can not be used in Flows
  • ZMNHIA2 (Flush On/Off Thermostat): input 2 and 3 can not be used in Flows
  • ZMNHSD1 (DIN Dimmer): input 1 can not be used in Flows