Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ...
MikeQu223 · Sep 8, 2016 · e8b3b45 · e8b3b45
2 parents d71f058 + 95390e3
commit e8b3b45
Show file tree

Hide file tree

Showing 37 changed files with 172 additions and 109 deletions.
diff --git a/.mailmap b/.mailmap
@@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>

diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
 directory provides configuration templates for all documented
 events, that can be used with perf tool. For example "xp_valid_flit"
 is an equivalent of "type=0x8,event=0x4". Other parameters must be
-explicitly specified. For events originating from device, "node"
-defines its index. All crosspoint events require "xp" (index),
-"port" (device port number) and "vc" (virtual channel ID) and
-"dir" (direction). Watchpoints (special "event" value 0xfe) also
-require comparator values ("cmp_l" and "cmp_h") and "mask", being
-index of the comparator mask.
+explicitly specified.
 
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
 Masks are defined separately from the event description
 (due to limited number of the config values) in the "cmp_mask"
 directory, with first 8 configurable by user and additional

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -1624,7 +1624,7 @@ N:	rockchip
 
 ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene@kernel.org>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -1831,6 +1831,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
 S:	Maintained
 F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/include/asm/hardware/cache-uniphier.h
@@ -7464,7 +7465,8 @@ F:	Documentation/devicetree/bindings/sound/max9860.txt
 F:	sound/soc/codecs/max9860.*
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/power/max14577_charger.c
@@ -7480,7 +7482,8 @@ F:	include/dt-bindings/*/*max77802.h
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577*.c
@@ -9246,7 +9249,7 @@ F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -10179,7 +10182,7 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -10194,7 +10197,8 @@ F:	drivers/video/fbdev/s3c-fb.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
 M:	Sangbeom Kim <sbkim73@samsung.com>
-M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported

diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 

diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {

diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -390,12 +390,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +405,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -447,14 +447,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };

diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {

diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 

diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -46,6 +46,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;

diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";

diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};

diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
@@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);