Rebase

README.md

@@ -1,3 +1,20 @@
+# Tataru OS
+
+THIS ISN'T INTENDED FOR ANYONE TO USE IT, IT'S A PERSONAL REPO USED FOR MY NEEDS. USE IT AT YOUR RISK
+
+Rebase :
+
+`sudo rpm-ostree rebase ostree-unverified-registry:ghcr.io/mimillieuh/bluebuild-tataru-os:latest`
+
+Signed Rebase : 
+
+`sudo rpm-ostree rebase ostree-image-signed:docker://ghcr.io/mimillieuh/bluebuild-tataru-os:latest`
+
+![270388194-ff6dcb21-c7d9-4df2-98d4-141b6b21ce14](https://github.com/MiMillieuh/BlueBuild-TataruOS/assets/52078885/07b63d9e-c19a-4c66-afda-fc8fc6923081)
+
+
+
+
 # BlueBuild Template   [![build-ublue](https://github.com/blue-build/template/actions/workflows/build.yml/badge.svg)](https://github.com/blue-build/template/actions/workflows/build.yml)
 
 See the [BlueBuild docs](https://blue-build.org/how-to/setup/) for quick setup instructions for setting up your own repository based on this template.

config/files/usr/etc/gamemode.ini

@@ -0,0 +1,101 @@
+[general]
+; The reaper thread will check every 5 seconds for exited clients, for config file changes, and for the CPU/iGPU power balance
+reaper_freq=5
+
+; The desired governor is used when entering GameMode instead of "performance"
+desiredgov=performance
+; The default governor is used when leaving GameMode instead of restoring the original value
+;defaultgov=powersave
+
+; The iGPU desired governor is used when the integrated GPU is under heavy load
+igpu_desiredgov=powersave
+; Threshold to use to decide when the integrated GPU is under heavy load.
+; This is a ratio of iGPU Watts / CPU Watts which is used to determine when the
+; integraged GPU is under heavy enough load to justify switching to
+; igpu_desiredgov.  Set this to -1 to disable all iGPU checking and always
+; use desiredgov for games.
+igpu_power_threshold=0.3
+
+; GameMode can change the scheduler policy to SCHED_ISO on kernels which support it (currently
+; not supported by upstream kernels). Can be set to "auto", "on" or "off". "auto" will enable
+; with 4 or more CPU cores. "on" will always enable. Defaults to "off".
+softrealtime=off
+
+; GameMode can renice game processes. You can put any value between 0 and 20 here, the value
+; will be negated and applied as a nice value (0 means no change). Defaults to 0.
+renice=0
+
+; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value
+; between 0 and 7 here (with 0 being highest priority), or one of the special values
+; "off" (to disable) or "reset" (to restore Linux default behavior based on CPU priority),
+; currently, only the best-effort class is supported thus you cannot set it here
+ioprio=0
+
+; Sets whether gamemode will inhibit the screensaver when active
+; Defaults to 1
+inhibit_screensaver=1
+
+[filter]
+; If "whitelist" entry has a value(s)
+; gamemode will reject anything not in the whitelist
+;whitelist=RiseOfTheTombRaider
+
+; Gamemode will always reject anything in the blacklist
+;blacklist=HalfLife3
+;    glxgears
+
+[gpu]
+; Here Be Dragons!
+; Warning: Use these settings at your own risk
+; Any damage to hardware incurred due to this feature is your responsibility and yours alone
+; It is also highly recommended you try these settings out first manually to find the sweet spots
+
+; Setting this to the keyphrase "accept-responsibility" will allow gamemode to apply GPU optimisations such as overclocks
+;apply_gpu_optimisations=0
+
+; The DRM device number on the system (usually 0), ie. the number in /sys/class/drm/card0/
+;gpu_device=0
+
+; Nvidia specific settings
+; Requires the coolbits extension activated in nvidia-xconfig
+; This corresponds to the desired GPUPowerMizerMode
+; "Adaptive"=0 "Prefer Maximum Performance"=1 and "Auto"=2
+; See NV_CTRL_GPU_POWER_MIZER_MODE and friends in https://github.com/NVIDIA/nvidia-settings/blob/master/src/libXNVCtrl/NVCtrl.h
+;nv_powermizer_mode=1
+
+; These will modify the core and mem clocks of the highest perf state in the Nvidia PowerMizer
+; They are measured as Mhz offsets from the baseline, 0 will reset values to default, -1 or unset will not modify values
+;nv_core_clock_mhz_offset=0
+;nv_mem_clock_mhz_offset=0
+
+; AMD specific settings
+; Requires a relatively up to date AMDGPU kernel module
+; See: https://dri.freedesktop.org/docs/drm/gpu/amdgpu.html#gpu-power-thermal-controls-and-monitoring
+; It is also highly recommended you use lm-sensors (or other available tools) to verify card temperatures
+; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now
+;amd_performance_level=high
+
+[supervisor]
+; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for
+; The whilelist and blacklist control which supervisor programs are allowed to make the above requests
+;supervisor_whitelist=
+;supervisor_blacklist=
+
+; In case you want to allow a supervisor to take full control of gamemode, this option can be set
+; This will only allow gamemode clients to be registered by using the above functions by a supervisor client
+;require_supervisor=0
+
+[custom]
+; Custom scripts (executed using the shell) when gamemode starts and ends
+;start=notify-send "GameMode started"
+;    /home/me/bin/stop_ethmining.sh
+start=powerprofilesctl set performance
+;start=tongfang-control -fl loud; tongfang-control -fm intelligent
+
+;end=notify-send "GameMode ended"
+;    /home/me/bin/start_ethmining.sh
+end=powerprofilesctl set balanced
+;end=tongfang-control -fl quiet; tongfang-control -fm intelligent
+
+; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time.
+;script_timeout=10

config/files/usr/etc/gdm/custom.conf

@@ -0,0 +1,16 @@
+# GDM configuration storage
+
+[daemon]
+# Uncomment the line below to force the login screen to use Xorg
+WaylandEnable=true
+
+[security]
+
+[xdmcp]
+
+[chooser]
+
+[debug]
+# Uncomment the line below to turn on debugging
+#Enable=true
+