Add XTLW motherboards

Marlin/src/core/boards.h

@@ -132,6 +132,8 @@
 #define BOARD_PANOWIN_CUTLASS         1165  // Panowin Cutlass (as found in the Panowin F1)
 #define BOARD_KODAMA_BARDO            1166  // Kodama Bardo V1.x (as found in the Kodama Trinus)
 #define BOARD_DAGOMA_D6               1167  // Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)
+#define BOARD_XTLW_MFF_V1             1168  // XTLW MFF V1.0
+#define BOARD_XTLW_MFF_V2             1169  // XTLW MFF V2.0
 
 //
 // RAMBo and derivatives
@@ -273,6 +275,7 @@
 #define BOARD_MKS_SGEN_L_V2           2509  // MKS SGEN_L V2
 #define BOARD_BTT_SKR_E3_TURBO        2510  // BigTreeTech SKR E3 Turbo
 #define BOARD_FLY_CDY                 2511  // FLYmaker FLY CDY
+#define BOARD_XTLW_CLIMBER_8TH_LPC    2512  // XTLW_CLIMBER_8TH_LPC
 
 //
 // SAM3X8E ARM Cortex-M3
@@ -467,6 +470,7 @@
 #define BOARD_MELLOW_FLY_E3_V2        5249  // Mellow Fly E3 V2 (STM32F407VG)
 #define BOARD_FYSETC_CHEETAH_V30      5250  // FYSETC Cheetah V3.0 (STM32F446RC)
 #define BOARD_BLACKBEEZMINI_V1        5251  // BlackBeezMini V1 (STM32F401CCU6)
+#define BOARD_XTLW_CLIMBER_8TH        5252  // XTLW Climber-8th (STM32F407VGT6)
 
 //
 // Other ARM Cortex-M4

Marlin/src/pins/lpc1769/pins_XTLW_CLIMBER_8TH_LPC.h

@@ -0,0 +1,280 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "env_validate.h"
+
+#define BOARD_INFO_NAME   "XTLW Climber-8th-LPC"
+
+//
+// Servos
+//
+#define SERVO0_PIN                         P1_26
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                          P1_29
+#define X_MAX_PIN                          P1_28
+#define Y_STOP_PIN                         P1_25
+#define Z_STOP_PIN                         P1_22
+
+//
+// Steppers
+//
+#define X_STEP_PIN                         P2_00
+#define X_DIR_PIN                          P1_01
+#define X_ENABLE_PIN                       P1_00
+#ifndef X_CS_PIN
+  #define X_CS_PIN                         P1_04
+#endif
+
+#define X2_STEP_PIN                        P2_05
+#define X2_DIR_PIN                         P0_11
+#define X2_ENABLE_PIN                      P2_13
+#ifndef X2_CS_PIN
+  #define X2_CS_PIN                        P0_10
+#endif
+
+#define Y_STEP_PIN                         P2_01
+#define Y_DIR_PIN                          P1_09
+#define Y_ENABLE_PIN                       P1_08
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                         P1_10
+#endif
+
+#define Z_STEP_PIN                         P2_02
+#define Z_DIR_PIN                          P1_15
+#define Z_ENABLE_PIN                       P1_14
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                         P1_16
+#endif
+
+#define E0_STEP_PIN                        P2_03
+#define E0_DIR_PIN                         P4_29
+#define E0_ENABLE_PIN                      P1_17
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                        P4_28
+#endif
+
+#define E1_STEP_PIN                        P2_04
+#define E1_DIR_PIN                         P2_11
+#define E1_ENABLE_PIN                      P0_04
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                        P2_12
+#endif
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                    P0_20
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                    P0_19
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                     P0_21
+  #endif
+#endif
+
+#if HAS_TMC_UART
+
+  #define X_SERIAL_TX_PIN                  P1_04
+  #define X_SERIAL_RX_PIN                  P1_04
+
+  #define X2_SERIAL_TX_PIN                 P0_10
+  #define X2_SERIAL_RX_PIN                 P0_10
+
+  #define Y_SERIAL_TX_PIN                  P1_10
+  #define Y_SERIAL_RX_PIN                  P1_10
+
+  #define Z_SERIAL_TX_PIN                  P1_16
+  #define Z_SERIAL_RX_PIN                  P1_16
+
+  #define E0_SERIAL_TX_PIN                 P4_28
+  #define E0_SERIAL_RX_PIN                 P4_28
+
+  #define E1_SERIAL_TX_PIN                 P2_12
+  #define E1_SERIAL_RX_PIN                 P2_12
+
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                      P0_26_A3  // (T4)
+#define TEMP_1_PIN                      P0_25_A2  // (T3)
+#define TEMP_BED_PIN                    P0_23_A0  // (T1)
+
+//
+// Heaters / Fans
+//
+#define HEATER_BED_PIN                     P3_26
+#define HEATER_0_PIN                       P3_25
+#define HEATER_1_PIN                       P1_20
+
+#define FAN0_PIN                           P1_18
+#define FAN1_PIN                           P1_23
+#define FAN2_PIN                           P1_21
+#define FAN3_PIN                           P0_24
+#define FAN4_PIN                           P1_24
+
+//
+// Filament sensor
+//
+#define FIL_RUNOUT_PIN                     P1_27
+#define FIL_RUNOUT2_PIN                    P0_27
+
+//
+// SD Connection
+//
+#ifndef SDCARD_CONNECTION
+  #define SDCARD_CONNECTION              ONBOARD
+#endif
+
+#if SD_CONNECTION_IS(ONBOARD)
+  #define SD_SS_PIN                        P0_06
+  #define SD_SCK_PIN                       P0_07
+  #define SD_MISO_PIN                      P0_08
+  #define SD_MOSI_PIN                      P0_09
+  #define SD_DETECT_PIN                    P0_05
+#elif SD_CONNECTION_IS(LCD)
+  #define SD_SCK_PIN                       P0_15
+  #define SD_MISO_PIN                      P0_17
+  #define SD_MOSI_PIN                      P0_18
+  #define SD_SS_PIN                        P0_16
+  #define SD_DETECT_PIN                    P2_06
+#endif
+
+/**
+ *               -----                                             -----
+ *           NC | 1 2 | GND                                    5V | 1 2 | GND
+ *        RESET | 3 4 | P2_06 (SD_DETECT)          (LCD_D7) P1_31 | 3 4 | P1_30 (LCD_D6)
+ * (MOSI) P0_18 | 5 6   P0_01 (BTN_EN2)            (LCD_D5) P2_08 | 5 6   P1_19 (LCD_D4)
+ *(SD_SS) P0_16 | 7 8 | P0_00 (BTN_EN1)            (LCD_RS) P2_10 | 7 8 | P0_22 (LCD_EN)
+ *  (SCK) P0_15 | 9 10| P0_17 (MISO)              (BTN_ENC) P0_28 | 9 10| P2_07 (BEEPER)
+ *               -----                                             -----
+ *               EXP2                                              EXP1
+ */
+
+//
+// LCDs and Controllers
+//
+#if IS_TFTGLCD_PANEL
+
+  #if ENABLED(TFTGLCD_PANEL_SPI)
+    #define TFTGLCD_CS                     P0_00
+  #endif
+
+  #define SD_DETECT_PIN                    P2_06
+
+#elif HAS_WIRED_LCD
+
+  #define BEEPER_PIN                       P2_07
+  #define BTN_ENC                          P0_28
+
+  #if ENABLED(CR10_STOCKDISPLAY)
+
+    #define LCD_PINS_RS                    P1_30
+
+    #define BTN_EN1                        P0_22
+    #define BTN_EN2                        P1_19
+
+    #define LCD_PINS_EN                    P1_31
+    #define LCD_PINS_D4                    P2_08
+
+  #else
+
+    #define BTN_EN1                        P0_00
+    #define BTN_EN2                        P0_01
+
+    #define LCD_SDSS                       P0_16
+
+    #if ENABLED(MKS_12864OLED_SSD1306)
+
+      #define LCD_PINS_DC                  P2_08
+      #define DOGLCD_CS                    P2_10
+      #define DOGLCD_A0              LCD_PINS_DC
+      #define DOGLCD_SCK                   P1_19
+      #define DOGLCD_MOSI                  P0_22
+
+      #define LCD_PINS_RS                  P1_30
+      #define LCD_PINS_D7                  P1_31
+      #define KILL_PIN                     -1     // NC
+
+    #else                                         // !MKS_12864OLED_SSD1306
+
+      #define LCD_PINS_RS                  P2_10
+
+      #define LCD_PINS_EN                  P0_22
+      #define LCD_PINS_D4                  P1_19
+
+      #if ENABLED(FYSETC_MINI_12864)
+
+        #define DOGLCD_CS                  P0_22
+        #define DOGLCD_A0                  P2_10
+        #define DOGLCD_SCK                 P0_15
+        #define DOGLCD_MOSI                P0_18
+
+        #define LCD_BACKLIGHT_PIN          -1
+
+        #define FORCE_SOFT_SPI                    // Use this if default of hardware SPI causes display problems
+                                                  //   results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+        #define LCD_RESET_PIN              P1_19  // Must be high or open for LCD to operate normally.
+
+        #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+          #ifndef RGB_LED_R_PIN
+            #define RGB_LED_R_PIN          P2_08
+          #endif
+          #ifndef RGB_LED_G_PIN
+            #define RGB_LED_G_PIN          P1_30
+          #endif
+          #ifndef RGB_LED_B_PIN
+            #define RGB_LED_B_PIN          P1_31
+          #endif
+        #elif ENABLED(FYSETC_MINI_12864_2_1)
+          #define NEOPIXEL_PIN             P2_08
+        #endif
+
+      #else                                       // !FYSETC_MINI_12864
+
+        #if ENABLED(MKS_MINI_12864)
+          #define DOGLCD_CS                P2_08
+          #define DOGLCD_A0                P1_30
+        #endif
+
+        #if ENABLED(ULTIPANEL)
+          #define LCD_PINS_D5              P2_08
+          #define LCD_PINS_D6              P1_30
+          #define LCD_PINS_D7              P1_31
+        #endif
+
+      #endif // !FYSETC_MINI_12864
+
+    #endif // !MKS_12864OLED_SSD1306
+
+  #endif // !CR10_STOCKDISPLAY
+
+#endif // HAS_WIRED_LCD

Marlin/src/pins/pins.h

@@ -270,6 +270,10 @@
   #include "ramps/pins_PANOWIN_CUTLASS.h"           // ATmega2560                           env:mega2560ext
 #elif MB(KODAMA_BARDO)
   #include "ramps/pins_KODAMA_BARDO.h"              // ATmega2560                           env:mega2560ext
+#elif MB(XTLW_MFF_V1)
+  #include "ramps/pins_XTLW_MFF_V1.h"               // ATmega2560                           env:mega2560
+#elif MB(XTLW_MFF_V2)
+  #include "ramps/pins_XTLW_MFF_V2.h"               // ATmega2560                           env:mega2560
 
 //
 // RAMBo and derivatives
@@ -504,6 +508,8 @@
   #include "lpc1769/pins_BTT_SKR_E3_TURBO.h"        // LPC1769                              env:LPC1769
 #elif MB(FLY_CDY)
   #include "lpc1769/pins_FLY_CDY.h"                 // LPC1769                              env:LPC1769
+#elif MB(XTLW_CLIMBER_8TH_LPC)
+  #include "lpc1769/pins_XTLW_CLIMBER_8TH_LPC.h"    // LPC1769                              env:LPC1769
 
 //
 // Due (ATSAM) boards
@@ -828,6 +834,8 @@
   #include "stm32f4/pins_MELLOW_FLY_E3_V2.h"        // STM32F4                              env:FLY_E3_V2
 #elif MB(BLACKBEEZMINI_V1)
   #include "stm32f4/pins_BLACKBEEZMINI.h"           // STM32F4                              env:BLACKBEEZMINI_V1
+#elif MB(XTLW_CLIMBER_8TH)
+  #include "stm32f4/pins_XTLW_CLIMBER_8TH.h"        // STM32F4                              env:XTLW_CLIMBER_8TH
 
 //
 // ARM Cortex-M7

Marlin/src/pins/ramps/pins_XTLW_MFF_V1.h

@@ -0,0 +1,64 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * XTLW MFF V1.0 pin assignments
+ */
+
+#include "env_validate.h"
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "XTLW MFF V1.0"
+#endif
+
+//
+// Steppers
+//
+#ifndef E2_STEP_PIN
+  #define E2_STEP_PIN                         42
+#endif
+#ifndef E2_DIR_PIN
+  #define E2_DIR_PIN                          40
+#endif
+#ifndef E2_ENABLE_PIN
+  #define E2_ENABLE_PIN                       44
+#endif
+
+//
+// Heaters / Fans
+//
+
+#define FET_ORDER_EFB                          1
+//#define HEATER_0_PIN                        10
+#define MOSFET_D_PIN                           7
+//#define HEATER_BED_PIN                       8
+
+// Filament sensor
+#if Y_MIN_PIN != 14 && !PIN_EXISTS(FIL_RUNOUT)
+  #define FIL_RUNOUT_PIN                      14  // Use Y_MIN limit switch interface
+#endif
+#if Z_MAX_PIN != 19 && !PIN_EXISTS(FIL_RUNOUT2)
+  #define FIL_RUNOUT2_PIN                     19  // Use Z_MAX limit switch interface
+#endif
+
+#include "pins_RAMPS.h"