cutting wipe in settings

MarlinFirmware · Sep 5, 2022 · bab7f1d · bab7f1d
1 parent a3138d7
commit bab7f1d
Show file tree

Hide file tree

Showing 7 changed files with 12 additions and 4 deletions.
diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp
@@ -40,6 +40,7 @@
  *  S[linear]     Swap length
  *  B[linear]     Extra Swap resume length
  *  E[linear]     Extra Prime length (as used by M217 Q)
+ *  G[linear/min] Cutting wipe retract
  *  P[linear/min] Prime speed
  *  Q[linear]     [extruder] Reset primed statut (To prime on next T...)
  *  R[linear/min] Retract speed
@@ -75,6 +76,7 @@ void GcodeSuite::M217() {
     if (parser.seenval('B')) { const float v = parser.value_linear_units(); toolchange_settings.extra_resume = constrain(v, -10, 10); }
     if (parser.seenval('E')) { const float v = parser.value_linear_units(); toolchange_settings.extra_prime = constrain(v, 0, max_extrude); }
     if (parser.seenval('P')) { const int16_t v = parser.value_linear_units(); toolchange_settings.prime_speed = constrain(v, 10, 5400); }
+    if (parser.seenval('G')) { const int16_t v = parser.value_linear_units(); toolchange_settings.wipe_retract = constrain(v, 0, 100); }
     if (parser.seenval('R')) { const int16_t v = parser.value_linear_units(); toolchange_settings.retract_speed = constrain(v, 10, 5400); }
     if (parser.seenval('U')) { const int16_t v = parser.value_linear_units(); toolchange_settings.unretract_speed = constrain(v, 10, 5400); }
     #if HAS_FAN && defined(TOOLCHANGE_FS_FAN)
@@ -163,7 +165,8 @@ void GcodeSuite::M217_report(const bool forReplay/*=true*/) {
     SERIAL_ECHOPGM(" S", LINEAR_UNIT(toolchange_settings.swap_length));
     SERIAL_ECHOPGM_P(SP_B_STR, LINEAR_UNIT(toolchange_settings.extra_resume),
                      SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime),
-                     SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed));
+                     SP_P_STR, LINEAR_UNIT(toolchange_settings.prime_speed),
+                     SP_P_STR, LINEAR_UNIT(toolchange_settings.wipe_retract));
     SERIAL_ECHOPGM(" R", LINEAR_UNIT(toolchange_settings.retract_speed),
                    " U", LINEAR_UNIT(toolchange_settings.unretract_speed),
                    " F", toolchange_settings.fan_speed,

diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
@@ -510,6 +510,7 @@ namespace Language_en {
   LSTR MSG_TOOL_CHANGE                    = _UxGT("Tool Change");
   LSTR MSG_TOOL_CHANGE_ZLIFT              = _UxGT("Z Raise");
   LSTR MSG_SINGLENOZZLE_PRIME_SPEED       = _UxGT("Prime Speed");
+  LSTR MSG_SINGLENOZZLE_WIPE_RETRACT      = _UxGT("Wipe Retract");
   LSTR MSG_SINGLENOZZLE_RETRACT_SPEED     = _UxGT("Retract Speed");
   LSTR MSG_FILAMENT_PARK_ENABLED          = _UxGT("Park Head");
   LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED   = _UxGT("Recover Speed");

diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
@@ -376,6 +376,7 @@ namespace Language_fr {
   LSTR MSG_TOOL_CHANGE                    = _UxGT("Changement outil");
   LSTR MSG_TOOL_CHANGE_ZLIFT              = _UxGT("Augmenter Z");
   LSTR MSG_SINGLENOZZLE_PRIME_SPEED       = _UxGT("Vitesse primaire");
+  LSTR MSG_SINGLENOZZLE_WIPE_RETRACT      = _UxGT("Purge Retract");
   LSTR MSG_SINGLENOZZLE_RETRACT_SPEED     = _UxGT("Vitesse rétract°");
   LSTR MSG_FILAMENT_PARK_ENABLED          = _UxGT("Garer Extrudeur");
   LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED   = _UxGT("Vitesse reprise");

diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp
@@ -124,6 +124,7 @@ void menu_advanced_settings();
       EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_UNRETRACT_SPEED, &toolchange_settings.unretract_speed, 10, 5400);
       EDIT_ITEM(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude);
       EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_PRIME_SPEED, &toolchange_settings.prime_speed, 10, 5400);
+      EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_WIPE_RETRACT, &toolchange_settings.wipe_retract, 0, 100);
       EDIT_ITEM_FAST(uint8, MSG_SINGLENOZZLE_FAN_SPEED, &toolchange_settings.fan_speed, 0, 255);
       EDIT_ITEM_FAST(uint8, MSG_SINGLENOZZLE_FAN_TIME, &toolchange_settings.fan_time, 1, 30);
     #endif

diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp
@@ -2909,6 +2909,7 @@ void MarlinSettings::reset() {
       toolchange_settings.unretract_speed = TOOLCHANGE_FS_UNRETRACT_SPEED;
       toolchange_settings.extra_prime     = TOOLCHANGE_FS_EXTRA_PRIME;
       toolchange_settings.prime_speed     = TOOLCHANGE_FS_PRIME_SPEED;
+      toolchange_settings.wipe_retract    = TOOLCHANGE_FS_WIPE_RETRACT;
       #ifdef TOOLCHANGE_FS_FAN
         toolchange_settings.fan_speed     = TOOLCHANGE_FS_FAN_SPEED;
         toolchange_settings.fan_time      = TOOLCHANGE_FS_FAN_TIME;

diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
@@ -941,7 +941,7 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0.
    */
   void extruder_cutting_recover(const_float_t e) {
     if (!too_cold(active_extruder)) {
-      const float dist = toolchange_settings.extra_resume + (TOOLCHANGE_FS_WIPE_RETRACT);
+      const float dist = toolchange_settings.extra_resume + (toolchange_settings.wipe_retract);
       FS_DEBUG("Performing Cutting Recover | Distance: ", dist, " | Speed: ", MMM_TO_MMS(toolchange_settings.unretract_speed), "mm/s");
       unscaled_e_move(dist, MMM_TO_MMS(toolchange_settings.unretract_speed));
       planner.synchronize();
@@ -1006,8 +1006,8 @@ void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_axis, 0.
 
     // Cutting retraction
     #if TOOLCHANGE_FS_WIPE_RETRACT
-      FS_DEBUG("Performing Cutting Retraction | Distance: ", -(TOOLCHANGE_FS_WIPE_RETRACT), " | Speed: ", MMM_TO_MMS(toolchange_settings.retract_speed), "mm/s");
-      unscaled_e_move(-(TOOLCHANGE_FS_WIPE_RETRACT), MMM_TO_MMS(toolchange_settings.retract_speed));
+      FS_DEBUG("Performing Cutting Retraction | Distance: ", -(toolchange_settings.wipe_retract), " | Speed: ", MMM_TO_MMS(toolchange_settings.retract_speed), "mm/s");
+      unscaled_e_move(-(toolchange_settings.wipe_retract), MMM_TO_MMS(toolchange_settings.retract_speed));
     #endif
 
     // Cool down with fan

diff --git a/Marlin/src/module/tool_change.h b/Marlin/src/module/tool_change.h
@@ -33,6 +33,7 @@
       float extra_prime;            // M217 E
       float extra_resume;           // M217 B
       int16_t prime_speed;          // M217 P
+      int16_t wipe_retract;         // M217 Q
       int16_t retract_speed;        // M217 R
       int16_t unretract_speed;      // M217 U
       uint8_t fan_speed;            // M217 F