Default on/off for Power Loss Recovery (#17051)

MarlinFirmware · Mar 2, 2020 · 552f7a9 · 552f7a9
1 parent ad4a9eb
commit 552f7a9
Show file tree

Hide file tree

Showing 3 changed files with 10 additions and 2 deletions.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -1039,9 +1039,13 @@
    * during SD printing. If the recovery file is found at boot time, present
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
+   *
+   * If the machine reboots when resuming a print you may need to replace or
+   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
   //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define PLR_ENABLED_DEFAULT  true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
     //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
     //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.

diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
@@ -65,6 +65,10 @@
   #define NUM_Z_STEPPER_DRIVERS 1
 #endif
 
+#ifndef PLR_ENABLED_DEFAULT
+  #define PLR_ENABLED_DEFAULT true
+#endif
+
 #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
   #undef Z_STEPPER_ALIGN_AMP
 #endif

diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
@@ -930,7 +930,7 @@ void MarlinSettings::postprocess() {
         #if ENABLED(POWER_LOSS_RECOVERY)
           recovery.enabled
         #else
-          true
+          PLR_ENABLED_DEFAULT
         #endif
       ;
       EEPROM_WRITE(recovery_enabled);
@@ -2670,7 +2670,7 @@ void MarlinSettings::reset() {
   //
 
   #if ENABLED(POWER_LOSS_RECOVERY)
-    recovery.enable(true);
+    recovery.enable(PLR_ENABLED_DEFAULT);
   #endif
 
   //