Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.

Documentation/feature-removal-schedule.txt

@@ -35,6 +35,17 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
+What:	AR9170USB
+When:	2.6.40
+
+Why:	This driver is deprecated and the firmware is no longer
+	maintained. The replacement driver "carl9170" has been
+	around for a while, so the devices are still supported.
+
+Who:	Christian Lamparter <chunkeey@googlemail.com>
+
+---------------------------
+
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -604,6 +615,13 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
 
+What:	xt_connlimit rev 0
+When:	2012
+Who:	Jan Engelhardt <jengelh@medozas.de>
+Files:	net/netfilter/xt_connlimit.c
+
+----------------------------
+
 What:	noswapaccount kernel command line parameter
 When:	2.6.40
 Why:	The original implementation of memsw feature enabled by
@@ -619,3 +637,11 @@ Why:	The original implementation of memsw feature enabled by
 Who:	Michal Hocko <mhocko@suse.cz>
 
 ----------------------------
+
+What:	ipt_addrtype match include file
+When:	2012
+Why:	superseded by xt_addrtype
+Who:	Florian Westphal <fw@strlen.de>
+Files:	include/linux/netfilter_ipv4/ipt_addrtype.h
+
+----------------------------

Documentation/networking/batman-adv.txt

@@ -1,4 +1,4 @@
-[state: 21-11-2010]
+[state: 27-01-2011]
 
 BATMAN-ADV
 ----------
@@ -67,15 +67,16 @@ All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
 #  ls  /sys/class/net/bat0/mesh/
-#  aggregated_ogms  bonding  fragmentation  orig_interval
-#  vis_mode
+#  aggregated_ogms  gw_bandwidth  hop_penalty
+#  bonding          gw_mode       orig_interval
+#  fragmentation    gw_sel_class  vis_mode
 
 
 There is a special folder for debugging informations:
 
 #  ls /sys/kernel/debug/batman_adv/bat0/
-#  originators  socket  transtable_global  transtable_local
-#  vis_data
+#  gateways     socket        transtable_global  vis_data
+#  originators  softif_neigh  transtable_local
 
 
 Some of the files contain all sort of status information  regard-
@@ -230,9 +231,8 @@ CONTACT
 Please send us comments, experiences, questions, anything :)
 
 IRC:            #batman   on   irc.freenode.org
-Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org
-                (optional   subscription   at
-                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
+Mailing-list:   b.a.t.m.a.n@open-mesh.org (optional  subscription
+          at https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
 
 You can also contact the Authors:
 

Documentation/networking/bonding.txt

@@ -2558,18 +2558,15 @@ enslaved.
 16. Resources and Links
 =======================
 
-The latest version of the bonding driver can be found in the latest
+	The latest version of the bonding driver can be found in the latest
 version of the linux kernel, found on http://kernel.org
 
-The latest version of this document can be found in either the latest
-kernel source (named Documentation/networking/bonding.txt), or on the
-bonding sourceforge site:
+	The latest version of this document can be found in the latest kernel
+source (named Documentation/networking/bonding.txt).
 
-http://www.sourceforge.net/projects/bonding
-
-Discussions regarding the bonding driver take place primarily on the
-bonding-devel mailing list, hosted at sourceforge.net.  If you have
-questions or problems, post them to the list.  The list address is:
+	Discussions regarding the usage of the bonding driver take place on the
+bonding-devel mailing list, hosted at sourceforge.net. If you have questions or
+problems, post them to the list.  The list address is:
 
 bonding-devel@lists.sourceforge.net
 
@@ -2578,6 +2575,17 @@ be found at:
 
 https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
+	Discussions regarding the developpement of the bonding driver take place
+on the main Linux network mailing list, hosted at vger.kernel.org. The list
+address is:
+
+netdev@vger.kernel.org
+
+	The administrative interface (to subscribe or unsubscribe) can
+be found at:
+
+http://vger.kernel.org/vger-lists.html#netdev
+
 Donald Becker's Ethernet Drivers and diag programs may be found at :
  - http://web.archive.org/web/*/http://www.scyld.com/network/ 
 

Documentation/networking/ip-sysctl.txt

@@ -280,6 +280,17 @@ tcp_max_orphans - INTEGER
 	more aggressively. Let me to remind again: each orphan eats
 	up to ~64K of unswappable memory.
 
+tcp_max_ssthresh - INTEGER
+	Limited Slow-Start for TCP with large congestion windows (cwnd) defined in
+	RFC3742. Limited slow-start is a mechanism to limit growth of the cwnd
+	on the region where cwnd is larger than tcp_max_ssthresh. TCP increases cwnd
+	by at most tcp_max_ssthresh segments, and by at least tcp_max_ssthresh/2
+	segments per RTT when the cwnd is above tcp_max_ssthresh.
+	If TCP connection increased cwnd to thousands (or tens of thousands) segments,
+	and thousands of packets were being dropped during slow-start, you can set
+	tcp_max_ssthresh to improve performance for new TCP connection.
+	Default: 0 (off)
+
 tcp_max_syn_backlog - INTEGER
 	Maximal number of remembered connection requests, which are
 	still did not receive an acknowledgment from connecting client.

Documentation/networking/phonet.txt

@@ -154,9 +154,28 @@ connections, one per accept()'d socket.
     write(cfd, msg, msglen);
   }
 
-Connections are established between two endpoints by a "third party"
-application. This means that both endpoints are passive; so connect()
-is not possible.
+Connections are traditionally established between two endpoints by a
+"third party" application. This means that both endpoints are passive.
+
+
+As of Linux kernel version 2.6.39, it is also possible to connect
+two endpoints directly, using connect() on the active side. This is
+intended to support the newer Nokia Wireless Modem API, as found in
+e.g. the Nokia Slim Modem in the ST-Ericsson U8500 platform:
+
+  struct sockaddr_spn spn;
+  int fd;
+
+  fd = socket(PF_PHONET, SOCK_SEQPACKET, PN_PROTO_PIPE);
+  memset(&spn, 0, sizeof(spn));
+  spn.spn_family = AF_PHONET;
+  spn.spn_obj = ...;
+  spn.spn_dev = ...;
+  spn.spn_resource = 0xD9;
+  connect(fd, (struct sockaddr *)&spn, sizeof(spn));
+  /* normal I/O here ... */
+  close(fd);
+
 
 WARNING:
 When polling a connected pipe socket for writability, there is an
@@ -181,45 +200,9 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
     interface index of the network interface created by PNPIPE_ENCAP,
     or zero if encapsulation is off.
 
-
-Phonet Pipe-controller Implementation
--------------------------------------
-
-Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
-option. It is useful when communicating with those Nokia Modems which do not
-implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
-U8500 platform.
-
-The implementation is based on the Data Connection Establishment Sequence
-depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
-document.
-
-It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
-between itself and a remote pipe-end point (e.g. modem).
-
-The implementation adds socket options at SOL_PNPIPE level:
-
- PNPIPE_PIPE_HANDLE
-	It accepts an integer argument for setting value of pipe handle.
-
-  PNPIPE_ENABLE accepts one integer value (int). If set to zero, the pipe
-    is disabled. If the value is non-zero, the pipe is enabled. If the pipe
-    is not (yet) connected, ENOTCONN is error is returned.
-
-The implementation also adds socket 'connect'. On calling the 'connect', pipe
-will be created between the source socket and the destination, and the pipe
-state will be set to PIPE_DISABLED.
-
-After a pipe has been created and enabled successfully, the Pipe data can be
-exchanged between the host-pep and remote-pep (modem).
-
-User-space would typically follow below sequence with Pipe controller:-
--socket
--bind
--setsockopt for PNPIPE_PIPE_HANDLE
--connect
--setsockopt for PNPIPE_ENCAP_IP
--setsockopt for PNPIPE_ENABLE
+  PNPIPE_HANDLE is a read-only integer value. It contains the underlying
+    identifier ("pipe handle") of the pipe. This is only defined for
+    socket descriptors that are already connected or being connected.
 
 
 Authors

MAINTAINERS

@@ -1231,7 +1231,7 @@ ATHEROS AR9170 WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@web.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
-S:	Maintained
+S:	Obsolete
 F:	drivers/net/wireless/ath/ar9170/
 
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
@@ -1727,6 +1727,7 @@ S:	Maintained
 F:	Documentation/zh_CN/
 
 CISCO VIC ETHERNET NIC DRIVER
+M:	Christian Benvenuti <benve@cisco.com>
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
@@ -5169,6 +5170,7 @@ RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 M:	Ivo van Doorn <IvDoorn@gmail.com>
 M:	Gertjan van Wingerde <gwingerde@gmail.com>
+M:	Helmut Schaa <helmut.schaa@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
@@ -6092,13 +6094,11 @@ F:	sound/soc/codecs/twl4030*
 TIPC NETWORK LAYER
 M:	Jon Maloy <jon.maloy@ericsson.com>
 M:	Allan Stephens <allan.stephens@windriver.com>
-L:	tipc-discussion@lists.sourceforge.net
+L:	netdev@vger.kernel.org (core kernel code)
+L:	tipc-discussion@lists.sourceforge.net (user apps, general discussion)
 W:	http://tipc.sourceforge.net/
-W:	http://tipc.cslab.ericsson.net/
-T:	git git://tipc.cslab.ericsson.net/pub/git/tipc.git
 S:	Maintained
 F:	include/linux/tipc*.h
-F:	include/net/tipc/
 F:	net/tipc/
 
 TILE ARCHITECTURE

arch/sh/include/asm/sh_eth.h

@@ -1,11 +1,21 @@
 #ifndef __ASM_SH_ETH_H__
 #define __ASM_SH_ETH_H__
 
+#include <linux/phy.h>
+
 enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+enum {
+	SH_ETH_REG_GIGABIT,
+	SH_ETH_REG_FAST_SH4,
+	SH_ETH_REG_FAST_SH3_SH2
+};
 
 struct sh_eth_plat_data {
 	int phy;
 	int edmac_endian;
+	int register_type;
+	phy_interface_t phy_interface;
+	void (*set_mdio_gate)(unsigned long addr);
 
 	unsigned char mac_addr[6];
 	unsigned no_ether_link:1;

crypto/Makefile

@@ -78,7 +78,7 @@ obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o
 obj-$(CONFIG_CRYPTO_ZLIB) += zlib.o
 obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o
 obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
-obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
+obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
 obj-$(CONFIG_CRYPTO_LZO) += lzo.o
 obj-$(CONFIG_CRYPTO_RNG2) += rng.o
 obj-$(CONFIG_CRYPTO_RNG2) += krng.o