BMCT-SLZ not exposing State Actions

[konminos]

What happened?

I run several BMCT-SLZ . I upgraded from 2.6.1 to 2.8.0. Under the new version 2.8.0, the following state actions don't show up anymore:

                            "press_released_left",
                            "press_released_right",
                            "hold_left",
                            "hold_right",
                            "hold_released_left",
                            "hold_released_right"

Only "on_left", "off_left", "on_right", "off_right" remain.

What did you expect to happen?

Expected all the state actions to show when the action is executed.

How to reproduce it (minimal and precise)

As I work with virtual machines, I could switch back and forth with both z2m versions. When switching to version 2.6.1, the actions appear. When switching to 2.8.0, they don't show up. The issue applies to all BMCT-SLZ on my network.

Zigbee2MQTT version

2.6.8

Adapter firmware version

20240710

Adapter

SLZB06

Setup

Add On in Home Assistant on Proxmox VM.

Device database.db entry

No response

Debug log

No response

Notes

A big thank you to @DerDreschner for your continuous support and work on the Bosch Devices!