[TS011F_2_gang_power] unable to turn on or off sockets remotely

[hanifsuandy]

What happened?

https://vi.aliexpress.com/item/1005006518819987.html?spm=a2g0o.order_list.order_list_main.27.6b9c1802XQByqA&gatewayAdapt=glo2vnm

I bought a few 2 gang power sockets a while back and had them installed and paired. Initially, they were identified as single gang plugs and I could only remotely turn on and off 1 of the sockets. I found that there was an OTA update so I got them updated, however, the issue remained the same.

Upon further research, it seemed that this device was not yet supported but was in the process of being added. Shortly after (lucky me), it was added so I updated Z2M and the device turned up properly. However, I am not able to turn on or off either sockets remotely and was met with z2m: No converter available for 'state_l1' ("ON") error.

Has it got to do with me performing OTA update while it was detected as a single gang plug? If so, is it possible to somehow reset the OTA update?

What did you expect to happen?

Expected to be able to turn on and off both sockets remotely.

How to reproduce it (minimal and precise)

• pair the device prior to Z2M 1.39.0
• perform OTA update
• update Z2M to 1.39.0
• re-pair device

Zigbee2MQTT version

1.39.0 commit: 0326926

Adapter firmware version

20230507

Adapter

SLZB-06

Setup

(Proxmox VE)
HAOS VM
Z2M LXC
Mosquitto LXC

Debug log

No response

[daffyonlsd]

Same problem, it added correctly out of box.
But power controls do not work.

[hanifsuandy]

That would mean that it has nothing to do with my pairing it and performing the OTA update prior to it being supported.

[daffyonlsd]

I presume there's a slight difference between model, our model is the universal plug type.

[hanifsuandy]

Hoping someone has an idea about errors relating to z2m: No converter available for 'state_l1' ("ON") so that I can do my own troubleshooting. I have had no experience with external converters and I've tried meddling with it but have had no success so far. Thanks in advance!

[beginner2047]

I have the same issue. It seems that it is due to the payload for device is changed.

{ "current": 0, "energy": 6, "linkquality": 144, "power": 0, "state_left": "OFF", "state_right": "ON", "voltage": 229, "state_l1": null, "state_l2": null }

it use state_left and state_right. I am trying to study how to add the coverter "state_left" and "state_left" or remap the "state_l1" to "state_left" and "state_right".

[beginner2047]

I have followed the issue #22981 to create the external converters

I have added the following code in configuration.yaml in zigbee2mqtt

external_converters: 
  - TS011F.js

Here is the file content of TS011F.js

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
// Add the lines below
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;
const {deviceEndpoints, identify, onOff, electricityMeter} = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
  zigbeeModel: ['TS011F'],
  model: 'TS011F', // Update this with the real model of the device (written on the device itself or product page)
  vendor: '_TZ3000_bep7ccew', // Update this with the real vendor of the device (written on the device itself or product page)
  description: '2 Gang Socket with power monitoring and USB', // Description of the device, copy from vendor site.
  extend: [deviceEndpoints({"endpoints":{"left":1,"right":2}}), onOff({"powerOnBehavior":false,"endpointNames":["left","right"]}), identify(), electricityMeter()],
          meta: {multiEndpointSkip: ['current', 'voltage', 'power', 'energy']},
  };

module.exports = definition;

The external converter is loaded
[2024-11-10 11:44:37] info: z2m: Loaded external converter 'TS011F.js'

But I still can't control it. May I know if any incorrect in my external converter file?

[beginner2047]

With reference to the file src/devices/tuya.ts (line 3169 - 3180)

    {
        fingerprint: tuya.fingerprint('TS011F', ['_TZ3000_bep7ccew']),
        model: 'TS011F_2_gang_power',
        vendor: 'Tuya',
        description: '2 gang socket with power monitoring and USB',
        extend: [
            deviceEndpoints({endpoints: {left: 1, right: 2}, multiEndpointSkip: ['current', 'voltage', 'power', 'energy']}),
            onOff({powerOnBehavior: false, endpointNames: **['l1', 'l2']}),**
            identify(),
            electricityMeter(),
        ],
    },

It seems that the endpointName defined l1 and l2. However, the device is only left and right for the endpointName. In issue#22981, the endpointName is also left and right. Can we change it to left and right?

[beginner2047]

I have used mosquitto_pub command, it can change the power socket on/off

Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket', ... (148 bytes))
{"current":0,"energy":7,"linkquality":140,"power":0,"state":"ON","state_l1":null,"state_l2":null,"state_left":"ON","state_right":"ON","voltage":225}
Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket', ... (148 bytes))
{"current":0,"energy":7,"linkquality":140,"power":0,"state":"ON","state_l1":null,"state_l2":null,"state_left":"ON","state_right":"ON","voltage":232}
Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket/right/set', ... (3 bytes))
OFF
Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket', ... (149 bytes))
{"current":0,"energy":7,"linkquality":140,"power":0,"state":"ON","state_l1":null,"state_l2":null,"state_left":"ON","state_right":"OFF","voltage":232}
Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket', ... (149 bytes))
{"current":0,"energy":7,"linkquality":144,"power":0,"state":"ON","state_l1":null,"state_l2":null,"state_left":"ON","state_right":"OFF","voltage":232}
Client null received PUBLISH (d0, q0, r0, m0, 'zigbee2mqtt/Socket', ... (150 bytes))
{"current":0,"energy":7,"linkquality":140,"power":0,"state":"ON","state_l1":null,"state_l2":null,"state_left":"OFF","state_right":"OFF","voltage":232}

but the problem is that both left and right will be changed too. At this moment, I created MQTT switch to remote control both sockets.

[hanifsuandy]

Sorry, finally found time to do a bit of troubleshooting.

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
// Add the lines below
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;
const {deviceEndpoints, identify, onOff, electricityMeter} = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
zigbeeModel: ['TS011F'],
model: 'TS011F', // Update this with the real model of the device (written on the device itself or product page)
vendor: '_TZ3000_bep7ccew', // Update this with the real vendor of the device (written on the device itself or product page)
description: '2 Gang Socket with power monitoring and USB', // Description of the device, copy from vendor site.
extend: [deviceEndpoints({"endpoints":{"left":1,"right":2}}), onOff({"powerOnBehavior":false,"endpointNames":["left","right"]}), identify(), electricityMeter()],
meta: {multiEndpointSkip: ['current', 'voltage', 'power', 'energy']},
};

I tried creating the same converter file as @beginner2047 did above with the exception of the name of the model and named it TS011F_2_gang_power. I restarted Z2M and re-paired the device but I couldn't do get it to work either.

Then I saw something about manuSpecificTuya in the debug logs and I remember seeing it in the Z2M documentation (https://www.zigbee2mqtt.io/advanced/support-new-devices/02_support_new_tuya_devices.html) so I modified the code to this:

const {} = require('zigbee-herdsman-converters/lib/modernExtend');
// Add the lines below
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const ota = require('zigbee-herdsman-converters/lib/ota');
const utils = require('zigbee-herdsman-converters/lib/utils');
const globalStore = require('zigbee-herdsman-converters/lib/store');
const e = exposes.presets;
const ea = exposes.access;
const {deviceEndpoints, identify, onOff, electricityMeter} = require('zigbee-herdsman-converters/lib/modernExtend');
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
  // Since a lot of Tuya devices use the same modelID, but use different datapoints
  // it's necessary to provide a fingerprint instead of a zigbeeModel
  fingerprint: [
      {
          // The model ID from: Device with modelID 'TS0601' is not supported
          // You may need to add \u0000 at the end of the name in some cases
          modelID: 'TS011F_2_gang_power',
          // The manufacturer name from: Device with modelID 'TS0601' is not supported.
          manufacturerName: '_TZ3000_bep7ccew',
      },
  ],
  model: 'TS011F_2_gang_power', // Update this with the real model of the device (written on the device itself or product page)
  vendor: 'Tuya', // Update this with the real vendor of the device (written on the device itself or product page)
  description: '2 Gang Socket with power monitoring and USB', // Description of the device, copy from vendor site.
  fromZigbee: [tuya.fz.datapoints],
  toZigbee: [tuya.tz.datapoints],
  onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime'
  configure: tuya.configureMagicPacket,
  extend: [deviceEndpoints({"endpoints":{"left":1,"right":2}}), onOff({"powerOnBehavior":false,"endpointNames":["left","right"]}), identify(), electricityMeter()],
          meta: {multiEndpointSkip: ['current', 'voltage', 'power', 'energy']},
  };

module.exports = definition;

However, I still get very similar logs to before I modified the codes. I don't know where to go from here.

root@zigbee2mqtt:/opt/zigbee2mqtt/data# cat log/2024-11-27.12-59-25/log.log | grep -i converter | grep -i ts011f
[2024-11-27 12:59:25] info:     z2m: Loaded external converter 'TS011F_2_gang_power.js'
[2024-11-27 13:00:17] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,113,10,1,208,72,2,0,6],"type":"Buffer"}'
[2024-11-27 13:00:17] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,113,10,1,208,72,2,0,6],"type":"Buffer"}'
[2024-11-27 13:00:17] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,113,10,1,208,72,2,0,6],"type":"Buffer"}'
[2024-11-27 13:00:17] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,113,10,1,208,72,2,0,6],"type":"Buffer"}'
[2024-11-27 13:00:17] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,113,10,1,208,72,2,0,6],"type":"Buffer"}'
[2024-11-27 13:00:18] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster '57344' and type 'raw' and data '{"data":[8,114,10,2,208,72,2,0,10],"type":"Buffer"}'
[2024-11-27 13:00:18] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster 'manuSpecificTuya_3' and type 'attributeReport' and data '{"53248":0,"53249":0,"53250":2619665,"53251":123,"53252":11944,"53253":1374,"powerOnBehavior":2,"switchType":0}'
[2024-11-27 13:00:18] debug:    z2m: No converter available for 'TS011F_2_gang_power' with cluster 'manuSpecificTuya_3' and type 'attributeReport' and data '{"powerOnBehavior":2}'

[hanifsuandy]

#23402 (comment)

I can also confirm that I have the same issue as @beginner2047 with the mosquitto_pub command.

[hanifsuandy]

It seems that the endpointName defined l1 and l2. However, the device is only left and right for the endpointName. In issue#22981, the endpointName is also left and right. Can we change it to left and right?

@beginner2047 was right. I manually changed the endpointNames to "left" and "right" from "l1" and "l2" respectively in the /opt/zigbee2mqtt/node_modules/zigbee-herdsman-converters/devices/tuya.js file in my Z2M container.

{
        fingerprint: tuya.fingerprint('TS011F', ['_TZ3000_bep7ccew']),
        model: 'TS011F_2_gang_power',
        vendor: 'Tuya',
        description: '2 gang socket with power monitoring and USB',
        extend: [ 
            (0, modernExtend_1.deviceEndpoints)({ endpoints: { left: 1, right: 2 }, multiEndpointSkip: ['current', 'voltage', 'power', 'energy'] }),
            (0, modernExtend_1.onOff)({ powerOnBehavior: false, endpointNames: ['left', 'right'] }),
            (0, modernExtend_1.identify)(),
            (0, modernExtend_1.electricityMeter)(),
        ],
    },

The states now correctly show OFF/ON toggles in the Z2M frontend and will trigger the sockets.

However, when I turn either one of them on/off, both will be triggered simultaneously.

[sleepypig2003]

I had the same problem. In home assistant, I fixed mine using the terminal this way:

get into the container containing zigbee2mqtt

docker exec -it `docker ps | grep zigbee2mqtt | cut -f 1 -d " "` /bin/bash

Edit the expanded javascript file

vi node_modules/zigbee-herdsman-converters/devices/tuya.js

Under fingerprint: tuya.fingerprint('TS011F', ['_TZ3000_bep7ccew']),

I changed this line:

            (0, modernExtend_1.onOff)({ powerOnBehavior: false, endpointNames: ['l1', 'l2'] }),

to:

            (0, modernExtend_1.onOff)({ powerOnBehavior: false, endpointNames: ['left', 'right'] }),

exit the container

exit

restart the docker container

docker container restart `docker ps | grep zigbee2mqtt | cut -f 1 -d " "`

The on off can now be controlled.

@Koenkk it seems like this commit is the cause of the problem:

Koenkk/zigbee-herdsman-converters@13ff5c5#diff-0157bb612c63e92c50f93116e1f50bf8e263030ed26d86caa28479159c2a9f4aR2593

I don't know if there are other devices with the name 'l1' and 'l2' endpoints, but mine definitely used 'left' and 'right':

info 2024-12-22 06:37:28z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0xa4c1384b927520e5', payload '{"current":0,"energy":0,"linkquality":255,"power":0,"state_l1":null,"state_l2":null,"state_left":"OFF","state_right":"OFF","voltage":248}'
info 2024-12-22 06:37:28z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0xa4c1384b927520e5', payload '{"current":0,"energy":0,"linkquality":255,"power":0,"state_l1":null,"state_l2":null,"state_left":"OFF","state_right":"OFF","voltage":248}'

[Koenkk]

Fixed the issue, thanks!

Changes will be available in the dev branch in a few hours from now. Note that the dev branch currently contains breaking changes, see #24198