Tuya TS0601 _TZE200_pw7mji0l Cover Motor: Open and Close state not working properly in Home Assistant

[didi3r]

What happened?

The "open" and "closed" states reported to Home Assistant are not working as expected. They seem to be based on whatever you set on the "state".

1. If you set it to "Open" in zigbee2mqtt, and then change the position through zigbee2mqtt or the remote. The state would be "open" regarding the position.

1. If you set it to "Close" in zigbee2mqtt, and then change the position through zigbee2mqtt or the remote. The state would be "closed" regarding the position.

3. If you set it to "Stop" in zigbee2mqtt, and then change the position through zigbee2mqtt or the remote. The state would be "open" or "closed" based on the position.

What did you expect to happen?

I would like the reported state of the covers to be always based on the position, not on what the user can randomly change.

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.33.2-dev commit: c8dcd71

Adapter firmware version

20220219

Adapter

Sonoff ZBDongleP (CC2652P)

Debug log

No response

[GvdbW]

I have the same issue with the roller TZE200_bv1jcqqu

it all worked normally until the last update. Now all my automation are broken and work randomly.

It seems related to this issue
#19539

[elad-bar]

i have the same issue for all tuya homeetec covers, checked the converters (i added them almost a year ago), nothing change in them but it now throws errors as described above

[elad-bar]

adding more details, devices:

• _TZE200_p6vz3wzt
• _TZE200_jhkttplm
• _TZE200_5nldle7w

seems that the issue is not as described here, pls ignore my comments

[alexeiw123]

I am seeing this behaviour as well, has anyone identified the source of the problem?

[alexeiw123]

@Koenkk how can we take an integrated device from .ts and use that to in a local .js external converter? I'd like to see if I can find a way around this but the only way I can see is starting from scratch.

The devices position updates OK so somehow just need the state to reflect the position regardless of if it is operated by ZigBee or RF remote.

[Koenkk]

Could you check if the issue is fixed with the following external converter:

• save this as file next to configuration.yaml as ext_converter.js
• add it to configuration.yaml:

external_converters:
  - ext_converter.js

• start z2m,
• in the frontend, check if the description of this device now ends with CUSTOM (this indicates the external converter has been loaded correctly)
• check if issue is fixed

[alexeiw123]

Could you check if the issue is fixed with the following external converter:

• save this as file next to configuration.yaml as ext_converter.js
• add it to configuration.yaml:

external_converters:
  - ext_converter.js

• start z2m,
• in the frontend, check if the description of this device now ends with CUSTOM (this indicates the external converter has been loaded correctly)
• check if issue is fixed

Thanks - I have added this external converter and I get no errors in my logs, however the blind description is still cover motor not cover motor CUSTOM as I'd expect.

external converter is showing in the GUI settings, so config seems to be working OK.

[alexeiw123]

• check if issue is fixed

OK I updated this line:
tuya.whitelabel('Zemismart', 'ZM25EL', 'Cover motor', ['_TZE200_pw7mji0l']),
To this:
tuya.whitelabel('Zemismart', 'ZM25EL', 'Cover motor CUSTOM', ['_TZE200_pw7mji0l']),

The external converter was loading but the white label line was preventing the description form updating

[alexeiw123]

• check if issue is fixed

Unfortunately no - using the external converter, the position expose doesn't update at all anymore.

[alexeiw123]

temporary workaround:

This will create a new cover entity in HA that interacts with the Z2MQTT created cover entity, but updates state based on the reported position in Z2M. in my very short testing this seems to be working for me until the converter issue is figure out.

cover:
  - platform: template
    covers:
      your_blind_temp:
        device_class: shade
        friendly_name: "Your blind temp"
        unique_id: your_blind_temp
        position_template: >-
          {{ state_attr('cover.your_blind', 'current_position')}}
        value_template: >-
          {% if state_attr('cover.your_blind', 'current_position') | int(default=0) > 0 %}
            open
          {% else %}
            closed
          {% endif %}
        open_cover:
          action: cover.open_cover
          target:
            entity_id: cover.your_blind
        close_cover:
          action: cover.close_cover
          target:
            entity_id: cover.your_blind
        stop_cover:
          action: cover.stop_cover
          target:
            entity_id: cover.your_blind
        set_cover_position:
          action: cover.set_cover_position
          data:
            position: "{{position}}"
          target:
            entity_id: cover.your_blind

[Koenkk]

Could you provide the debug log when changing the position of the cover and it not being updated?

See this on how to enable debug logging.

[alexeiw123]

Could you provide the debug log when changing the position of the cover and it not being updated?

See this on how to enable debug logging.

log.log

Here you go. FYI I opened the blind at 10:58 using the RF remote - I have trimmed the log from before that to reduce irrelevant content.

[2024-08-16 10:58:12] debug: z2m: Received Zigbee message from 'Ava blind' <-- this is the device I tested on

You can see from this screenshot that the Z2M provided entity is still reporting as 'closed' even though it's now open with position at 100. The other entity is from the template cover as per post above.

[Koenkk]

I updated https://gist.github.com/Koenkk/ea7f0f705ad78880088b84ac380415f4, can you try again?