Aqara T1 door & window contact sensor is only responding N/A

[Mwirenfeldt]

What happened?

I was adding a Aqara T1 door & window contact sensor to my network. and after the interview was done, the device is responing N/A in Contact, Battery and Voltage.
i have tried removing and adding 5 times, and it is not responing at all.

FirmwareBuild: 20230109
FirmwareVersion: 2019www.
Model: MCCGQ12LM

What did you expect to happen?

i expected at least a True False respond.

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.33.2 commit: unknown

Adapter firmware version

7.1.1.0 build 273

Adapter

Skyconnect

Debug log

Log from Adding Device to network:
2023-11-04 17:49:13Received Zigbee message from '0x54ef4410009258b0', type 'readResponse', cluster 'ssIasZone', data '{"iasCieAddr":"0xe0798dfffe110b42","zoneState":1}' from endpoint 1 with groupID 0
Debug 2023-11-04 17:49:13No converter available for 'MCCGQ12LM' with cluster 'ssIasZone' and type 'readResponse' and data '{"iasCieAddr":"0xe0798dfffe110b42","zoneState":1}'
Info 2023-11-04 17:49:13Successfully interviewed '0x54ef4410009258b0', device has successfully been paired
Info 2023-11-04 17:49:13Device '0x54ef4410009258b0' is supported, identified as: Xiaomi Aqara T1 door & window contact sensor (MCCGQ12LM)
Info 2023-11-04 17:49:13MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":{"description":"Aqara T1 door & window contact sensor","exposes":[{"access":1,"description":"Indicates if the contact is closed (= true) or open (= false)","label":"Contact","name":"contact","property":"contact","type":"binary","value_off":true,"value_on":false},{"access":1,"description":"Remaining battery in %, can take up to 24 hours before reported.","label":"Battery","name":"battery","property":"battery","type":"numeric","unit":"%","value_max":100,"value_min":0},{"access":1,"description":"Voltage of the battery in millivolts","label":"Voltage","name":"voltage","property":"voltage","type":"numeric","unit":"mV"},{"access":1,"description":"Link quality (signal strength)","label":"Linkquality","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"MCCGQ12LM","options":[],"supports_ota":true,"vendor":"Xiaomi"},"friendly_name":"0x54ef4410009258b0","ieee_address":"0x54ef4410009258b0","status":"successful","supported":true},"type":"device_interview"}'

Open and closing the contact:
Debug 2023-11-04 18:00:30Received Zigbee message from '0x54ef4410009258b0', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":33}' from endpoint 1 with groupID 0
Debug 2023-11-04 18:00:30No converter available for 'MCCGQ12LM' with cluster 'ssIasZone' and type 'commandStatusChangeNotification' and data '{"extendedstatus":0,"zonestatus":33}'
Debug 2023-11-04 18:00:31Received Zigbee message from '0x54ef4410009258b0', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":32}' from endpoint 1 with groupID 0
Debug 2023-11-04 18:00:31No converter available for 'MCCGQ12LM' with cluster 'ssIasZone' and type 'commandStatusChangeNotification' and data '{"extendedstatus":0,"zonestatus":32}'

[bodek85]

exactly the same for me

[Klapperman]

I've been mucking about trying to create a custom converter. The way the syntax looks for the default converter is that it's expecting a completely different message structure. When scanning the converters already created the only ones which are similar are a gas and smoke converter. For example:
byun_smoke_true: { cluster: 'ssIasZone', type: ['commandStatusChangeNotification'], convert: (model, msg, publish, options, meta) => { if (msg.endpoint.ID == 1 && msg.data['zonestatus'] == 33) { return {smoke: true}; } }, } as Fz.Converter,

I'm hoping @Koenkk can help because my attempts to create a custom converter based on this and the available documentation are ending up with a non-working zigbee2mqtt instance which will only start again after removing my external converter :(.

[dusan-ivanco]

same here

[Koenkk]

Could you check if the issue is fixed with the following external converter: https://gist.github.com/Koenkk/20a6e2592ba7444d3d51a9d393defcea

• save this as file next to configuration.yaml as ext_converter.js
• add it to configuration.yaml:

external_converters:
  - ext_converter.js

• start z2m, check if issue is fixed

[Klapperman]

Could you check if the issue is fixed with the following external converter: https://gist.github.com/Koenkk/20a6e2592ba7444d3d51a9d393defcea

* save this as file next to `configuration.yaml` as `ext_converter.js`

* add it to `configuration.yaml`:

external_converters:
  - ext_converter.js

* start z2m, check if issue is fixed

Hi @Koenkk, this fixes it. After restarting the contact shows OPEN and CLOSED status correctly. Battery and Battery Voltage still are represented with a NULL though, but that's not too big of an issue.

Log entries:

debug 2023-11-11 10:42:12Received Zigbee message from '0x54ef44100084ff12', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":33}' from endpoint 1 with groupID 0

info 2023-11-11 10:42:12MQTT publish: topic 'zigbee2mqtt/0x54ef44100084ff12', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":33,"tamper":false,"update":{"installed_version":30,"latest_version":30,"state":"idle"},"update_available":false,"voltage":null}'

debug 2023-11-11 10:42:12Received Zigbee message from '0x54ef44100084ff12', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":32}' from endpoint 1 with groupID 0

info 2023-11-11 10:42:12MQTT publish: topic 'zigbee2mqtt/0x54ef44100084ff12', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":30,"tamper":false,"update":{"installed_version":30,"latest_version":30,"state":"idle"},"update_available":false,"voltage":null}'

[Koenkk]

Great, regarding battery please try with https://gist.github.com/Koenkk/20a6e2592ba7444d3d51a9d393defcea and wait 24 hours to see if battery is reported.

[Klapperman]

Great, regarding battery please try with https://gist.github.com/Koenkk/20a6e2592ba7444d3d51a9d393defcea and wait 24 hours to see if battery is reported.

Battery is shown as an icon on the devices page of zigbee2mqtt but when you open de exposes page of the sensor it show:

Contact
Indicates if the contact is closed (= true) or open (= false)   Closed

Battery
Remaining battery in %, can take up to 24 hours before reported.   N/A%

Voltage
Voltage of the battery in millivolts   N/AmV

Linkquality
Link quality (signal strength)   51lqi

[Koenkk]

Updated https://gist.github.com/Koenkk/20a6e2592ba7444d3d51a9d393defcea , with this, make sure the configure succeeds by manually triggering it from the z2m frontend -> device -> yellow refresh icon, if it fails, wakeup the device right before doing so. Then wait 24 hours and see if battery % is reported now.

[dusan-ivanco]

Now I have a different problem. After the "Availability Timeout" (in my case, it's 720), all MCCGQ12LM devices are in an offline state, but only those connected through the router. Two devices directly connected to the coordinator report normally. It doesn't matter which router they are connected to (I have Hornbach bulbs, Philips Hue, and Sonoff ZBDongle-E with router firmware in the network). The MCCGQ12LM status reports as okay even when it is already offline. So, if I open the door, it immediately switches to online and shows the correct "open" status. Similarly, when the door is open and after the availability timeout, when the MCCGQ12LM goes offline, if I close the door, it correctly shows the status change to "closed," and of course, switches back to online. MCCGQ12LM worked fine before firmware 20230109, so the issue is probably not with the routers. Thank you very much for your help.

[Koenkk]

• Does the battery reporting work now?
• I expect 720 is too low, for end devices I recommend to use 1500 which means that the device should at least send one message every 25 hours.

[Klapperman]

• Does the battery reporting work now?

After applying the update, restarting zigbee2mqtt and then waking up the device and reconfiguring I get:

info  2023-11-15 05:59:12: Configuring 'Contact Sensor Brievenbus Buiten'
error 2023-11-15 05:59:22: Failed to configure 'Contact Sensor Brievenbus Buiten', attempt 1 (Error: Bind 0x54ef44100084ff12/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
    at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
    at listOnTimeout (node:internal/timers:559:17)
    at processTimers (node:internal/timers:502:7))
info  2023-11-15 05:59:22: MQTT publish: topic 'zigbee2mqtt/bridge/response/device/configure', payload '{"data":{"id":"Contact Sensor Brievenbus Buiten"},"error":"Failed to configure (Bind 0x54ef44100084ff12/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms))","status":"error","transaction":"014n9-1"}'
debug 2023-11-15 06:01:00: Received MQTT message on 'zigbee2mqtt/bridge/request/device/configure' with data '{"id":"Contact Sensor Brievenbus Binnen","transaction":"utc9q-1"}'
info  2023-11-15 06:01:00: Configuring 'Contact Sensor Brievenbus Binnen'
error 2023-11-15 06:01:10: Failed to configure 'Contact Sensor Brievenbus Binnen', attempt 1 (Error: Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
    at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
    at listOnTimeout (node:internal/timers:559:17)
    at processTimers (node:internal/timers:502:7))
info  2023-11-15 06:01:10: MQTT publish: topic 'zigbee2mqtt/bridge/response/device/configure', payload '{"data":{"id":"Contact Sensor Brievenbus Binnen"},"error":"Failed to configure (Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms))","status":"error","transaction":"utc9q-1"}'
debug 2023-11-15 06:02:18: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":33}' from endpoint 1 with groupID 0
info  2023-11-15 06:02:18: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
debug 2023-11-15 06:02:21: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":32}' from endpoint 1 with groupID 0
info  2023-11-15 06:02:21: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
debug 2023-11-15 06:02:46: Received MQTT message on 'zigbee2mqtt/bridge/request/device/configure' with data '{"id":"Contact Sensor Brievenbus Binnen","transaction":"utc9q-2"}'
info  2023-11-15 06:02:46: MQTT publish: topic 'zigbee2mqtt/bridge/response/device/configure', payload '{"data":{"id":"Contact Sensor Brievenbus Binnen"},"status":"ok","transaction":"utc9q-2"}'
debug 2023-11-15 06:03:34: Received MQTT message on 'zigbee2mqtt/bridge/request/device/configure' with data '{"id":"Contact Sensor Brievenbus Binnen","transaction":"utc9q-3"}'
info  2023-11-15 06:03:34: MQTT publish: topic 'zigbee2mqtt/bridge/response/device/configure', payload '{"data":{"id":"Contact Sensor Brievenbus Binnen"},"status":"ok","transaction":"utc9q-3"}'
debug 2023-11-15 06:04:25: Received MQTT message on 'zigbee2mqtt/bridge/request/device/configure' with data '{"id":"Contact Sensor Brievenbus Binnen","transaction":"pleay-2"}'
info  2023-11-15 06:04:25: MQTT publish: topic 'zigbee2mqtt/bridge/response/device/configure', payload '{"data":{"id":"Contact Sensor Brievenbus Binnen"},"status":"ok","transaction":"pleay-2"}'
debug 2023-11-15 06:06:00: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":33}' from endpoint 1 with groupID 0
info  2023-11-15 06:06:00: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":33,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
debug 2023-11-15 06:06:06: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":32}' from endpoint 1 with groupID 0
info  2023-11-15 06:06:06: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'

*** restarted zigbee2mqtt again to be sure ***

info  2023-11-15 06:07:23: Contact Sensor Brievenbus Buiten (0x54ef44100084ff12): MCCGQ12LM - Xiaomi Aqara T1 door & window contact sensor (EndDevice)
info  2023-11-15 06:07:23: Contact Sensor Brievenbus Binnen (0x54ef441000850010): MCCGQ12LM - Xiaomi Aqara T1 door & window contact sensor (EndDevice)
info  2023-11-15 06:07:25: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability', payload 'online'
info  2023-11-15 06:07:25: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability', payload 'online'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/binary_sensor/0x54ef44100084ff12/contact/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"device_class":"door","object_id":"contact_sensor_brievenbus_buiten_contact","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_off":true,"payload_on":false,"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_contact_zigbee2mqtt","value_template":"{{ value_json.contact }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef44100084ff12/battery/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"device_class":"battery","enabled_by_default":true,"entity_category":"diagnostic","object_id":"contact_sensor_brievenbus_buiten_battery","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_battery_zigbee2mqtt","unit_of_measurement":"%","value_template":"{{ value_json.battery }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef44100084ff12/voltage/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"device_class":"voltage","enabled_by_default":false,"entity_category":"diagnostic","object_id":"contact_sensor_brievenbus_buiten_voltage","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_voltage_zigbee2mqtt","unit_of_measurement":"mV","value_template":"{{ value_json.voltage }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef44100084ff12/linkquality/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:signal","name":"Linkquality","object_id":"contact_sensor_brievenbus_buiten_linkquality","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_linkquality_zigbee2mqtt","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef44100084ff12/update_state/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:update","name":"Update state","object_id":"contact_sensor_brievenbus_buiten_update_state","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_update_state_zigbee2mqtt","value_template":"{{ value_json['update']['state'] }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/binary_sensor/0x54ef44100084ff12/update_available/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"device_class":"update","enabled_by_default":false,"entity_category":"diagnostic","name":null,"object_id":"contact_sensor_brievenbus_buiten_update_available","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_off":false,"payload_on":true,"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_update_available_zigbee2mqtt","value_template":"{{ value_json['update']['state'] == \"available\" }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/update/0x54ef44100084ff12/update/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten/availability"}],"availability_mode":"all","command_topic":"zigbee2mqtt/bridge/request/device/ota_update/update","device":{"identifiers":["zigbee2mqtt_0x54ef44100084ff12"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Buiten","sw_version":"2019\u0000www."},"device_class":"firmware","entity_category":"config","entity_picture":"https://github.com/Koenkk/zigbee2mqtt/raw/master/images/logo.png","json_attributes_template":"{\"in_progress\": \"{{ value_json['update']['state'] == 'updating' }}\"}","json_attributes_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","latest_version_template":"{{ value_json['update']['latest_version'] }}","latest_version_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","name":null,"object_id":"contact_sensor_brievenbus_buiten","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_install":"{\"id\": \"0x54ef44100084ff12\"}","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Buiten","unique_id":"0x54ef44100084ff12_update_zigbee2mqtt","value_template":"{{ value_json['update']['installed_version'] }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/binary_sensor/0x54ef441000850010/contact/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"device_class":"door","object_id":"contact_sensor_brievenbus_binnen_contact","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_off":true,"payload_on":false,"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_contact_zigbee2mqtt","value_template":"{{ value_json.contact }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef441000850010/battery/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"device_class":"battery","enabled_by_default":true,"entity_category":"diagnostic","object_id":"contact_sensor_brievenbus_binnen_battery","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_battery_zigbee2mqtt","unit_of_measurement":"%","value_template":"{{ value_json.battery }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef441000850010/voltage/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"device_class":"voltage","enabled_by_default":false,"entity_category":"diagnostic","object_id":"contact_sensor_brievenbus_binnen_voltage","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_voltage_zigbee2mqtt","unit_of_measurement":"mV","value_template":"{{ value_json.voltage }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef441000850010/linkquality/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:signal","name":"Linkquality","object_id":"contact_sensor_brievenbus_binnen_linkquality","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_linkquality_zigbee2mqtt","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/sensor/0x54ef441000850010/update_state/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:update","name":"Update state","object_id":"contact_sensor_brievenbus_binnen_update_state","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_update_state_zigbee2mqtt","value_template":"{{ value_json['update']['state'] }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/binary_sensor/0x54ef441000850010/update_available/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"device_class":"update","enabled_by_default":false,"entity_category":"diagnostic","name":null,"object_id":"contact_sensor_brievenbus_binnen_update_available","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_off":false,"payload_on":true,"state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_update_available_zigbee2mqtt","value_template":"{{ value_json['update']['state'] == \"available\" }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'homeassistant/update/0x54ef441000850010/update/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state"},{"topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen/availability"}],"availability_mode":"all","command_topic":"zigbee2mqtt/bridge/request/device/ota_update/update","device":{"identifiers":["zigbee2mqtt_0x54ef441000850010"],"manufacturer":"Xiaomi","model":"Aqara T1 door & window contact sensor (MCCGQ12LM)","name":"Contact Sensor Brievenbus Binnen","sw_version":"2019\u0000www."},"device_class":"firmware","entity_category":"config","entity_picture":"https://github.com/Koenkk/zigbee2mqtt/raw/master/images/logo.png","json_attributes_template":"{\"in_progress\": \"{{ value_json['update']['state'] == 'updating' }}\"}","json_attributes_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","latest_version_template":"{{ value_json['update']['latest_version'] }}","latest_version_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","name":null,"object_id":"contact_sensor_brievenbus_binnen","origin":{"name":"Zigbee2MQTT","sw":"1.33.2","url":"https://www.zigbee2mqtt.io"},"payload_install":"{\"id\": \"0x54ef441000850010\"}","state_topic":"zigbee2mqtt/Contact Sensor Brievenbus Binnen","unique_id":"0x54ef441000850010_update_zigbee2mqtt","value_template":"{{ value_json['update']['installed_version'] }}"}'
info  2023-11-15 06:07:28: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Buiten', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":66,"tamper":false,"update":{"installed_version":30,"latest_version":30,"state":"idle"},"update_available":false,"voltage":null}'
info  2023-11-15 06:07:28: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":36,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
info  2023-11-15 06:08:44: Configuring 'Contact Sensor Brievenbus Binnen'
info  2023-11-15 06:08:44: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
info  2023-11-15 06:08:51: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
error 2023-11-15 06:08:54: Failed to configure 'Contact Sensor Brievenbus Binnen', attempt 1 (Error: Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
    at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
    at listOnTimeout (node:internal/timers:559:17)
    at processTimers (node:internal/timers:502:7))
info  2023-11-15 06:09:04: Configuring 'Contact Sensor Brievenbus Binnen'
info  2023-11-15 06:09:04: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
info  2023-11-15 06:09:06: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":30,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
error 2023-11-15 06:09:14: Failed to configure 'Contact Sensor Brievenbus Binnen', attempt 2 (Error: Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
    at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
    at listOnTimeout (node:internal/timers:559:17)
    at processTimers (node:internal/timers:502:7))
debug 2023-11-15 06:11:44: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":33}' from endpoint 1 with groupID 0
info  2023-11-15 06:11:44: Configuring 'Contact Sensor Brievenbus Binnen'
info  2023-11-15 06:11:44: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":33,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
debug 2023-11-15 06:11:46: Received Zigbee message from 'Contact Sensor Brievenbus Binnen', type 'commandStatusChangeNotification', cluster 'ssIasZone', data '{"extendedstatus":0,"zonestatus":32}' from endpoint 1 with groupID 0
info  2023-11-15 06:11:46: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":36,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
error 2023-11-15 06:11:54: Failed to configure 'Contact Sensor Brievenbus Binnen', attempt 3 (Error: Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms)
    at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35)
    at listOnTimeout (node:internal/timers:559:17)
    at processTimers (node:internal/timers:502:7))

*** waited a while and then retriggered sensor ***

info  2023-11-15 06:33:30: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":false,"linkquality":27,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'
info  2023-11-15 06:33:32: MQTT publish: topic 'zigbee2mqtt/Contact Sensor Brievenbus Binnen', payload '{"battery":null,"battery_low":false,"contact":true,"linkquality":24,"tamper":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":null}'

The error error 2023-11-15 06:11:54: Failed to configure 'Contact Sensor Brievenbus Binnen', attempt 3 (Error: Bind 0x54ef441000850010/1 genPowerCfg from '0x00124b00216003e1/1' failed (AREQ - ZDO - bindRsp after 10000ms) after waiting a while is no longer given. The sensors themselves still works afterwards, and still shows a Battery OK status on the Devices overview.

On the Exposes Tab of one of the devices it still says:

Contact
Indicates if the contact is closed (= true) or open (= false)   Closed
Battery
Remaining battery in %, can take up to 24 hours before reported.   N/A %
Voltage
Voltage of the battery in millivolts   N/A mV
Linkquality
Link quality (signal strength)   36 lqi

[Koenkk]

Thanks, so we can conclude that the device doesn't support battery, only battery_low seems to be supported which I've added to the exposes now.

Changes will be available in the dev branch in a few hours from now. (https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html)