Create USB_C_Plug_JAE_DX07P024AJ1.kicad_mod

[dsilwa]

Footprint for JAE DX07P024AJ1 USB-C plug.
https://www.mouser.com/ds/2/206/MB-0301-2E_DX07_PLUG-890474.pdf

---

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items:

• Provide a URL to a datasheet for the footprint(s) you are contributing
• An example screenshot image is very helpful
• If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
• Check the output of the Travis automated check scripts - fix any errors as required

[CLAassistant]

All committers have signed the CLA.

[Ratfink]

Thanks for the contribution, and sorry for taking so long to review this. We've been discussing name changes of USB Type-C connectors that may affect this PR, but I can certainly review everything except the name in the meantime.

For footprints like this, proper placement of the anchor can be hard to determine. I'd suggest placing it aligned with the bottom-most PCB edge lines, on the "℄ OF 7.8 ±0.08" on the drawing.

The horizontal PCB edge segments under the shield pads should be 0.65 mm from the bottom-most edge lines vertically, but you have this offset as 0.6 mm.

Please add a vertical PCB edge line on the left side extending as far up as the one on the right side.

The drawing shows the shield pads near the top of the footprint only as rectangular pads on the bottom, not as plated-through holes. Also, though it is quite imprecise about their dimensions, it does show the spacing between their outer edges as 7.65 mm, but you have this as 7.875 mm. Presumably this dimension should be centered in the X dimension on the 8.2 mm-wide section of PCB. Further, their bottom is shown as 3.45 mm from the bottom PCB edge line, so please fix this as well.

Please move the "PCB Edge" text to be centered on the bottom edge lines, so it's clearer what line is being labeled.

As described in KLC rule F5.3, courtyard clearance for should be 0.5 mm from PCB edge lines and exposed copper all around. This should be rounded up, if necessary, to keep the endpoints of the lines on a 0.01 mm grid.

[Misca1234]

@Ratfink
I think this one is abandoned, do you want to take over it, if not, I can do it.

[Ratfink]

There's exactly zero chance I'll be able to work on this in the next two weeks. If you want to take it over, be my guest. 🙂

[Misca1234]

Ok, I am on it

[Misca1234]

This have been repushed
#1365