Add USB Micro-B Amphenol 10103592-0001LF Connector

[dokthar]

Add footprint for the USB Micro-B connector Amphenol 10103592-0001LF

• Provide a URL to a datasheet for the footprint(s) you are contributing
  datasheet
• An example screenshot image is very helpful
  
• If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
  No matching 3D model exists.
• Check the output of the Travis automated check scripts - fix any errors as required
• Give a reason behind any intentional library convention rule violation.
  Breaks rule KLC F4.2 "Pin 1 should be located at the top left"
  This connector is a reverse mount, all the pins are ordered in the opposite direction from "normal" USB Micro-B connector. I think it make sense to keep pin 1 in the top right corner (As done in footprint USB_Micro-AB_Molex_47590-0001).

[CLAassistant]

All committers have signed the CLA.

[jneiva08]

Hi,

You forgot to add the default 3D (KLC F9.3)

[dokthar]

latest changes:

• Removed F.Paste Layer in through hole pad
• Added default 3D model (F9.3)

[poeschlr]

Please rotate the footprint such that pad 1 is closest to the top left corner.
Is there a reason that part of the PCB edge is on the drawings layer instead of edge cuts?

Two dimensions are off

The body dimensions and courtyard clearances are also wrong

[dokthar]

I've fixed the two dimensions that were off, and rotated the footprint such that pad 1 is in top left corner.
I have no idea of what the rules are for body dimension and courtyard, here is what I've done:
For the body dimension I have tried to follow the maximum body dimension shown in the datasheet,
for the courtyard I've put 0.5mm from the closest pad or body boundary.

Also I've placed the footprint anchor in the center of the body boundary.

[poeschlr]

The KLC specifies the use of nominal so please use it not maximum.